|
| |
|
|
Road bridge over the Budišovka river
Zývala, Pavel ; Požár, Michal (referee) ; Koláček, Jan (advisor)
The aim of this bachelor thesis is to design of bridge construction over the river of Budišovka located near the village of Budišov nad Budišovkou. The load bearing system is composed from one reinforced concretespan. The structural design was made in two variants, which were compared between them. For calculations of first way was used the software of Scia Engineering 16.1 and second way was calculated by simplified manual method of effective width. All calculations were performed according to actual standard EN.
|
|
|
Bridge on the II/369 road
Gratza, Jonáš ; Požár, Michal (referee) ; Panáček, Josef (advisor)
The content of the thesis is solved by a road bridge on one span. The bridge is on the road II / 369 across the river Branná. In this work we were drawn from three studies which option was selected No.1. It is post-tensioned plate-grinder construction. Static model with Load Model and its effects was solved in Scia Engineer 15.2. Opinion are processed manually, according to EC. Wind load, snow and horizontal forces from traffic were neglected.
|
|
|
Rebuilding a Family House
Zlámalová, Pavlína ; Požár, Michal (referee) ; Švaříčková, Ivana (advisor)
The thesis deals with the reconstruction of the family house. The main aim of my thesis is assessment of the existing floor slab and designing of reinforcement due to lack of static part of design documentation. Internal forces on the slab are obtained by using finite element method on which the slab is designed. Due to superstructure of one extra floor above original structure it is necessary to make the hole for the staircase into the existing ceiling construction and demolition of loadbearing wall for disposition improvement. Intervention into the original construction has the effect of redistribution internal forces. At this case additional reinforcement of floor slab is necessary. For additional floor slab are selected and designed CFRP carbon straps. Rotate rib is being prepared instead of original demolished loadbearing wall which will be connect with original floor slab by using of stirrups. All calculations were performed in accordance with valid standard.
|
|
|
Reinforced concrete structure of a department store
Košík, Ondřej ; Požár, Michal (referee) ; Šulák, Pavel (advisor)
The bachelor thesis deals with the design and assessment of main parts of the carried reinforced concrete structure of a department store. The aim of the thesis was to design and evaluate the reinforced concrete structure of the ceiling slab, pillar, staircase and the wall. A graphical documentation of selected elements is also a part of the thesis. The calculation of internal forces was performed in a computational program SCIA Engineer 17, subsequently this calculation was verified by a manual method. The construction is designed according to the ČSN EN standards.
|
|
| |
|
|
Frame reinforced concrete structure
Kalinová, Kristýna ; Perla, Jan (referee) ; Požár, Michal (advisor)
The aim of this bachelor thesis was design a part of a load-bearing cast-in-place reinforced concreate structure of the warehouse building. The load-bearing structure was designed of transversely oriented multi-storey frame. Floor structure consists of a continuous slab and secondary beams placed on the primary beams of the frames. The shape and reinforcement of the continuous slab, secondary beams, primery beam, column and pile cap was designed. Appropriate drawing documentation has been created for the proposed load-bearing elements.
|
|
|
Prefabricated reinforced concrete hall with crane track
Velecký, Tomáš ; Kostiha, Vojtěch (referee) ; Požár, Michal (advisor)
This bachelor thesis is focused on static solution of prefabricated reinforced concrete hall with crane runway. Specifically, the cross-section of the hall, which consists of rectangular columns and a T-profile reinforced concrete truss, is solved here. The load on the structure is transmitted to the subsoil by calyx-reinforced concrete pavements. The bachelor thesis deals with the design and assessment of individual structural elements. Elements are dimensioned according to ČSN EN 1992-1-1: Design of concrete structures - general rules and rules for building structures. In the drawing part of the bachelor thesis are drawn drawings of the assembly of parts, shapes and reinforcement of individual parts.
|
|
|
Prefabricated hall for gym
Pavličko, Jakub ; Hrubý, Tomáš (referee) ; Požár, Michal (advisor)
The aim of the diploma thesis is to design particular vertical and horizontal elements of the prefabricated gym hall. The supporting structure of the gym is formed by means of the column system with the use of the roof preloaded trusses. The entrance part of the building is designed as a column system using load-bearing beams and prefabricated ceiling sections. Overall, the structure of the building consists of columns, footings, foundation beams, reinforcing beams, prefabricated components which function as a ceiling structure, components functioning as a grandstand, a load - bearing beams a preloaded roof trusses V1. The diploma thesis designs particular supporting elements of the construction together with the construction of a grandstand.
|
|
| |
guest ::
