|
|
Turbo-convolution and turbo-block codes
Šedý, Jakub ; Krajsa, Ondřej (referee) ; Šilhavý, Pavel (advisor)
The aim is to explain the Turbo convolutional and block turbo codes and decoding the secure message. The practical part focuses on the design of a demonstration program in Matlab. The work is divided into four parts. The first two deal with theoretical analysis of coding and decoding. The third section contains a description created a demonstration program that allows you to navigate the process of encoding and decoding. The fourth is devoted to simulation and performance of turbo codes.
|
|
|
Echo suppressor according to G.168 recommendation
Lajtkep, Tomáš ; Krajsa, Ondřej (referee) ; Sysel, Petr (advisor)
This master’s thesis deals with conditions and procedures of testing network echo cancellers according to recommendation ITU-T G.168. The point of it’s interest is design of test application which will perform the objective testing their basic and extended features in MATLAB. Theoretical section is concentrated on declaration the ground of echo cancellers and conditions of their testing. Procedures of particular tests follow in next part. The last section designs the testing function which results in entire application which tests submitted canceller and in chosen file write out the report and is also able to display results like graph.
|
|
|
Power line parameters
Kavan, Pavel ; Krajsa, Ondřej (referee) ; Mlýnek, Petr (advisor)
At the beginning is diploma thesis focused on a distribute power line parameters measurement and examination changes of this parameters depending on using of various power line cables. On the basis of measurements is made a transmission channel in Matlab & Simulink, where are executed simulations with power transmission line. The simulated power line is based on measured distribute parameters or physical proportions of cabels. By changing different parts of simulated communication channel is a symbol error rate expressed on the lenght of transmission line.
|
|
|
Measuring device connected over USB
Flek, Tomáš ; Strašil, Ivo (referee) ; Krajsa, Ondřej (advisor)
In essence, this master’s thesis focuses on search and project on optimal electrical scheme, which will substitute for digital oscilloscope function. The thesis consist of three parts, first part is about problems associated with oscilloscope signal sampling and data bus descriptions, second part where are selected particular circuits, electrical scheme, eventually shown different options which could be used. Third part consists of software function description developed for controlling microprocessor. In choosing of analog devices, are focused on parameters like maximal input voltage on which the device has most ideal parameters, but also parameters, which are critical for particular block, like for example input impedance, device noise, operating amplifier input voltage and current offset. All devices were chosen with battery supply possibility, so what the lowest possible power consumption. In this thesis is theoretically described each circuit block and reasons for their selection.
|
|
|
Head Pose Estimation and Tracking
Pospíšil, Aleš ; Krajsa, Ondřej (referee) ; Přinosil, Jiří (advisor)
Diplomová práce je zaměřena na problematiku detekce a sledování polohy hlavy v obraze jako jednu s možností jak zlepšit možnosti interakce mezi počítačem a člověkem. Hlavním přínosem diplomové práce je využití inovativních hardwarových a softwarových technologií jakými jsou Microsoft Kinect, Point Cloud Library a CImg Library. Na úvod je představeno shrnutí předchozích prací na podobné téma. Následuje charakteristika a popis databáze, která byla vytvořena pro účely diplomové práce. Vyvinutý systém pro detekci a sledování polohy hlavy je založený na akvizici 3D obrazových dat a registračním algoritmu Iterative Closest Point. V závěru diplomové práce je nabídnuto hodnocení vzniklého systému a jsou navrženy možnosti jeho budoucího zlepšení.
|
|
|
Vehicle detection in images
Pálka, Zbyněk ; Přinosil, Jiří (referee) ; Krajsa, Ondřej (advisor)
This thesis dissert on traffic monitoring. There are couple of different methods of background extraction and four methods vehicle detection described here. Furthermore there is one method that describes vehicle counting. All of these methods was realized in Matlab where was created graphical user interface. One whole chapter is dedicated to process of practical realization. All methods are compared by set of testing videos. These videos are resulting in statistics which diagnoses about efficiency of single one method.
|
|
|
Automatic Attendant application using Asterisk PBX
Benýšek, Jiří ; Krajsa, Ondřej (referee) ; Kovář, Petr (advisor)
Application of IP telephony is still more and more popular. This technology is designed for large companies as well as for home or office use. If customer needs to use advanced features of the private branch exchanges, he had to purchase more expensive solutions than common equipment. These professional products may be replaced by open source solutions, which can fully replace them. Private branch exchange Asterisk is one example of these products. Bachelor’s thesis is focused on IP telephony, treats of basic principles and network protocols used by this service. This thesis then describes the public branch exchange Asterisk, its possibilities for use in call centers and administration of call queues using this PBX. After theoretical analysis, this thesis deals with installation and configuration of this PBX. It includes installation of necessary operating system, additional packages containing necessary libraries and modules needed for correct function of the PBX. Configuration of Asterisk such as creation of user accounts of SIP protocol and dialplan is described in the next chapter and then all of these functions are tested. Achieved practical results are presented in the last chapter of this bachelor’s thesis.
|
|
|
Virtual serial port and its safety conversion to Ethernet
Pokorný, Michal ; Krajsa, Ondřej (referee) ; Koutný, Martin (advisor)
Bachelor´s thesis try to find a solution to make virtual serial port and its safe transfer on Ethernet. Nowdays communications channels don't offer appropriate security of a whole communication. Therefore it depends on get-togethers, in order to realize this security themselves.This means ensure reliable data transfer, these data from among get-togethers encrypt in order to appropriate attacher be unable to read them in real - time, eventually to change them. As a result this Bachelor thesis is the application, which, except transfer between virtual serial port and Ethernet, insure authentication among get - togehthers communication and cipher transfer among them. As an encryption algorithm is used algorithm AES. It is concerned symmetrical cipher, which ciphers data after pages about size 128 byte.
|
|
|
Thermostat for biological experiments
Štens, Radovan ; Krajsa, Ondřej (referee) ; Chmelař, Milan (advisor)
Master's thesis deals with a design of the thermostat for biological experiments considering 2l of volume, with capability of setting up required temperature between 20-40 degree Celsius and related accuracy of measurement +/- 1 degree Celsius. Following chapters are one by one described and properly explained from possible ways of measuring temperature to final implementation. Result of the thesis presents necessarily calculations, discussion of module's performance modeling, schematics together with PCB's design and the list of components. Neither the question of software nor possibilities of realization is neglected.
|
|
|
Billing system and call monitoring for PBX Asterisk
Depiak, Petr ; Šilhavý, Pavel (referee) ; Krajsa, Ondřej (advisor)
This master's thesis is focused on developement of billing system with the options of monitoring individual calls for software exchange Asterisk. Billing of calls is adaptible with the help of group of individual rules, consisting of tariff impulses, numerical prefix, with help of outgoing trunk and cost of the billed unit. The first part of this work is focused on instalation, configuration and preparation of individual components of the billing system. In this work is explained the architecture of the billing system and highlighted the purpose of work of the model database. Next we focused on the purpose and the principal system invidual function of the system including solution. At last there is a simple manual to operate the system with the help of created web interface.
|
guest ::
