|
|
Foundation Design of the Athletics Stadium in Pilsner
Drs, Jakub ; Boštík, Jiří (referee) ; Glisníková, Věra (advisor)
The task of thisbachelor dissertation is to describe the concept of safe and economic foundation of the athletic stadium in Plzeň, the Czech Republic. The concept and assessment are developer on the basis of obtained geotechnical conditions and the load of the construction. The calculations are based upon valid forms and the concept approaches. Furthermore, the thesis focuses on technology and working proces of large diameter bored piles.
|
|
|
Design of Landslide Remediation
Poruba, Michal ; Glisníková, Věra (referee) ; Boštík, Jiří (advisor)
Main goal of thesis entitled "Landslide remediation design" is - based on acquired knowledge and submitted documents about the problematic of landslides - to determine the causes of the landslides on II. class road between villages Koryčany and Jestřabice and to propose optimal redevelopment.
|
|
|
Stabilization of landslide on road embankment
Kořínková, Jana ; Boštík, Jiří (referee) ; Doněk, Michal (advisor)
The topic of this Master`s thesis is to design stabilization of road embankment, which is between Brno-Chrlice and Brno-Holásky. Aim of this thesis is finding acceptable solution of problem including finding cause of fault and describing other possible options. Solution will be design in GEO5. Thesis is completed with procedure in pile installation and drawing documentation.
|
|
|
Automated firmware upload of many AVR microcontrollers over SPI bus
Boštík, Jiří ; Lattenberg, Ivo (referee) ; Hanák, Pavel (advisor)
The aim of this work is to construct a circuit for automated programming more microcontrollers Atmel AVR through the SPI bus and to devise and execute demonstration plant that will be able to automate this task, at least partially, therefore, ideally without human intervention, one programmer to load the firmware into more microcontrollers. The theoretical part describes the components that are used in the work, the description of their functionality and usability. For switching between microcontrollers we have a choice of two options. The first option is monitoring of the signal "reset", which is a simpler variant of SPI, or decoding the Atmel instructions. Thanks to the simplicity and practicality of the work will be used to monitoring of the signal of the "reset". For a better understanding in the work described how the whole problem will be work. They will describe each of the steps and for better orientation will be the block diagram too, which represents the most important part of the work. The practical part focuses on the practical testing of the proposed solution. In order to monitor the signal of the "reset" first we have to coordinate asynchronous counter with signal "reset" it to properly reply to a downward edge. Next we bring from the asynchronous counter BCD code with which the decoder switches to each of the microcontrollers using the switching transistors and then they are gradually programmed. Work will be used the programmer AVR Dragon, for which it will be used by the batch file for atprogram.exe, which is a standard part of Atmel Studio 6. In the work will be at least a partial test of the proposed problem to contact layer the field.
|
|
|
Ecoduct on Motorway D1
Matouš, Petr ; Boštík, Jiří (referee) ; Glisníková, Věra (advisor)
The master’s thesis focuses on suitable design of an ecoduct on the highway D1 near Jihlava. It includes a structural analysis of reinforced concrete strip footings and wooden beams in all phases of construction. The material of the main bearing system is glued laminated timber GL24h. An important part of three-jointed ecoduct wooden arched beams is well-chosen isolation.
|
|
|
Securing of Deep Cut in Slide Area
Pargač, Martin ; Boštík, Jiří (referee) ; Glisníková, Věra (advisor)
The thesis called Securing of Deep Cut in Slide Area focuses on the basic analysis of the problems connected to landslides and securing of the slopes. It also presents a solution of a certain problem, where the slope stability, potencional landslide launchers and subsequent remediaton are discussed.
|
|
|
Foundation pit design
Valkó, Attila ; Boštík, Jiří (referee) ; Doněk, Michal (advisor)
Diploma thesis deals with securing of foundation pit of family house in given geological conditions situated in Brno-Kohoutovice. The aim of the thesis is to list possible solutions of securing foundation pits in general and solve this geotechnical problem with an appropriate solution. Static calculations were performed by geotechnical software GEO5.
|
|
|
The Design of Hotel Foundations
Németh, Gábor ; Boštík, Jiří (referee) ; Glisníková, Věra (advisor)
The bachelor thesis discusses the possible ways of surface and underground establishing the basics of structures and buildings in his first part. In the second, practical part is being resolved a safe and economical foundation of a multi-functional building (a hotel) in Brno - Pisárky within the given geological conditions . Even though the proposed variants are calculated without the use of computational software, software PLAXIS is used to compare the results. The conclusion contains the comparison and evaluation of the results of both approaches.
|
|
| |
|
|
Jet Grouting
Kubín, Tomáš ; Boštík, Jiří (referee) ; Glisníková, Věra (advisor)
The aim of this thesis is to describe jet grouting. There are specified base methods of ground improvement and described possibilities of jet grouting. Furthermore thesis is focused on certain constructions and reconstructions in Brno, where this method was used. In detail it is concerned on reconstruction of the palace of Chlumecky, where jet grouting was used as shoring of foundation pit. Next part of this thesis is a numerical model of this foundation pit and comparison of the results from different constitutive models of soil.
|
guest ::
