|
|
Residence "Nová Líšeň"
Velín, Petr ; Jelínek, Petr (referee) ; Vajkay, František (advisor)
Thesis process in the form of project documentation, including all requirements according to applicable regulations. It is a new residential building on plot No. 5049/24 in the cadastral Brno - Lisen. The land is located in a developed area close to existing housing. The land is sloping towards the east. On the north side there is parking for residential units in connection with the entrance to the underground parking garage on the east side. The building's facade is more rugged and achieves approximate dimensions of 20.0 x 30.0 m Residential house is designed as a three-storey building with a basement, with a flat roof. In the basement there is a garage and utility room, the floors are residential units intended for permanent living persons. It is a building with a combined carrying system Porotherm and reinforced concrete structures insulated mineral insulation.
|
|
|
Nursing home
Jurajdová, Alžběta ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
The content of this diploma thesis is the design of a new boarding nursing home in Dolany. building with two floors and a residential attic. The main entrance to the building is located on the north side. On the first floor there is a spacious common room, two apartments (one belonging to the administrator of the building), technical room, room for maintenance and cleaning, storage, toilets, areas for nursing services and cellars. The second and third floors are accessible by internal stairs and elevators. Both floors have the same accessibility. In each of them there are a total of 7 apartments. the vertical load-bearing structures are made of ceramic masonry with a contact thermal insulation system. The roof structure consists of a gable roof with ceramic roofing. The project documentation was prepared in accordance with valid legal and technical regulations.
|
|
|
Family house with place of business
Zichová, Jana ; Jelínek, Petr (referee) ; Balíková, Jitka (advisor)
This work deals with a newly built detached house with a place of business – a hairdresser’s. The building is situated in the south-west part of the town of Pozořice in a distance of approximately 15 kilometres east of Brno. It is designed as an edifice on two floors, without a cellar and with a flat roof with single covering. On the ground floor the hairdresser’s and residential rooms for daily use are located while on the first floor there are places designed for relaxation with bedrooms and rooms for children. The house is planned for 2 adults and from 3 to 4 children.
|
|
|
Mixed-use building
Mareček, Patrik ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
The aim of my diploma thesis was a project of a new mixed-use building in the land register of Brno. The object is a 5 storey building that is with basement. In the basement is garage for 13 cars. The first floor will be located several shops. Between the second and the fourth floor will be dwelling units. It is covered by flat roof with Attica. I designed the project with emphasis on disposal orientation according to the cardinal points and constructed arrangements of the building. During the process I tried to use modern methods, common material and I tried to separate space for living and space for public.
|
|
|
STUDY OF BIOGENOUS BINDERS
Cupák, Petr ; Jelínek, Petr (referee) ; Neudert, Alois (referee) ; Rusín, Karel (advisor)
oundry production, which forms an integral part of the engineering industry, is a source of waste with a negative impact on the working and living environment. The pressure on greening the production in all production branches of industry does not dodge the foundry industry and technical engineers seek out possibilities of decreasing the negative impact of the production of casting on the environment. An important source of environmentally dangerous waste in foundry operation is the use of organic compounds during the preparation of shaping and core mixtures. Their substitution with materials that would ensure similar technological features of the shaping and core mixtures as the organic materials used hitherto and at the same time decrease the amount of solid, liquid and gaseous ecologically undesirable compounds used in or arising during the preparation and use of shaping and core mixtures, would be significant for decreasing the ecological burden connected to casting production. A promising group of materials usable as components of shaping and core mixtures are the biopolymer materials which can substitute the organic connective systems used in the production of foundry cores by the means of the so-called hot processes – Hot-Box and Warm-Box. This work focuses on the exploration of the technological and ecological features of several biopolymer materials available on the domestic market which have the potential to become a full alternative of the binders used so far on the basis of urea-formaldehyde, melamine-formaldehyde, phenol-formaldehyde and furan resins.
|
|
|
Mixed-use building
Paštěka, Jakub ; Krupica, Roman (referee) ; Jelínek, Petr (advisor)
Diploma thesis is in form of building documentation for construction according to valid regulations. Designed mixed-use building is located in Zlín on plots no. 2865/3, 2865/22, 2865/23 and 2866. Building has shape of letter L, it has three above-ground floors and undergroud garage. Building has three separate parts – part with flats of sizes 3+kk and 4+kk, training centre and community centre. Each part has different number of above-ground floors. New building is detached house with maximum height 10,48 m. Object is constructed with ceramics blocks. It has ventilated facade and flat green roof. Ceiling is designed as cast-in-place reinforced slab. Material for foundations is waterproof concrete. Diploma thesis also includes assessment of thermal technology, acoustic and fire safety.
|
|
|
Energy efficient house
Kmec, Peter ; Elešová, Klára (referee) ; Jelínek, Petr (advisor)
The purpose of my Bachelor work is the processing of the project documentation for implementation of a detached house on a land in the city of Brno, a borough of Líšeň. The land is a slopely towards the Southwest. The building is designed as a two-storey with a partial basement. 1.NP is handled as a social part and 2.NP as a part of relaxation. In the basement is a utility room and warehouse. Base construction is the strip foundation from the plain concrete. Vertical supporting constructures are from the aerated concrete floors blocks Ytong insulated with a thermal insulation Isover. Underground floor is from permanent formwork DITON which is drenched by a plain concrete and steel reinforcement. Horizontal supporting constructures are dealt as a ceramic Porotherm. The roof is a warm flat roof.
|
|
|
Apartment building
Jokl, Lukáš ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
The subject of the bachelor's thesis is the new construction of an apartment building in Brno-Bohunice. The apartment building has 4 floors. The building does not have a basement. On the ground floor there is an apartment for the disabled, a cellar for each apartment and technical facilities for the operation of the building. There are a total of 10 residential units in the apartment building and the projected capacity is 20 people. The building is made of brick blocks. The ceiling structure is designed as a semi-assembled brick inserts and beams, the flat roof is vegetation. The apartment building is designed as a house with almost zero energy consumption.
|
|
|
Mountain hotel
Moučka, Miroslav ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
The aim of this master’s project is to develop project documentation of a new-built mountain hotel in Ostružná. This hotel is near the ski area Ramzová in Jeseníky. Foundation of my building is from ground reinforced concrete slab. My building is supported by clay block load-bearing walls and clay non-load bearing walls. Exterior building envelope is designed as an aluminum shingle ventilated facade. The slabs are from reinforced concrete. The roofs of this designed building are two, first is pitched roof with insulation over rafters and second is intensive green warm flat roof. This project contains HVAC concept, photovoltaic panel concept, heating concept in technical equipment of building part. The third part of my master’s project is energy assessment for the building.
|
|
|
Sports centre Všechovice
Rolinc, Martin ; Jelínek, Petr (referee) ; Müller, Jan (advisor)
This diploma thesis deals with the design of a new sports center, which is situated in the cadastral unit of the village Všechovice 787086 (district of Přerov), on the plot number 163/1. The land is a planar character. It is a three floor building with two above-ground and partial basement. The construction is a square ground plan. The building is based on the strips foundation and foundation pads. The wall structural system consists of sandstone km beta sendwix blocks. The frame structural system is made up of reinforced concrete columns and beams, with the brickwork made of ytong classics. The external walls are insulated with a mineral wool insulation etics contact system. Ceiling structures are made of reinforced concrete slabs and wooden ceiling beams. The building is roofed with 3% flat roofs and part of the multipurpose hall is roofed with a curved, rolled roof. The diploma thesis is performed as a design documentation for the building process.
|
guest ::
