|
|
Condensing technology and flue gas
Müller, Jan ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
This thesis is developed as a proposal for heating for a primary school and kindergarten in the region of Brno-countryside. For the insulated building, a combination of heating and air-conditioning is proposed. The concept is designed so that the air-conditioning preheats the exterior air and the heating system warms the incoming air to a comfortable temperature. For the required thermal performance, sources of heat (for gas and pellets) and a layout solution for the boiler room is designed. Drainage of combustion products is proposed for both solutions. The project solution is per the extent of the construction permit. The theoretical part is linked with the practical part through the condensation boilers, their function and division, and drainage of combustion products. The experiment for the given topic was conducted on the drainage of combustion products. The pressure loss of the reverse knob was determined in relation to the flow rate of air in the condensation boilers as this loss is essential in assessing the drainage of combustion products.
|
|
|
Heating of Apartment Building
Ladomérská, Jana ; Wierzbická, Helena (referee) ; Topič, Jan (advisor)
In my bachelor thesis I propose heating and the preparation of hot water in an apartment building in Most. It is a renovated brick house with free floors. In the calculation I deal with the design of heating surfaces, distribution of hot water, hot water preparation and the sources of heat. I designed panel and tubular radiators and floor convectors for the bulding. Hot water, two pipe and symmetric distribution. The house will use the central system of hot water preparation. I selected a separated preparation of hot water for the production of untility hot water and hot water for heating. There will be two boilers installed in the house - a condensing and a low-temperature one. The condensing boiler will serve to prepare hot water for heating and the low temperature boiler for the preparation of hot utility water. The theoretical part will focus on the issue of regulation.
|
|
|
Heating of the Multifunctional Building
Konečný, Ladislav ; Topič, Jan (referee) ; Vendlová, Lucie (advisor)
This diploma thesis proposes the heating system and ventilation in mixed-use building. The building is located in Uherské Hradiště. The object of this work is the selection of appropriate variants of two heat sources (gas boilers and solid fuel boiler). The project is focus on design of the heating system chosen mode of heating, which are gas boilers and the concept of forced ventilation. The theoretical part is focused on the regulation.
|
|
|
Hydraulics solar systems
Podjuklová, Lucie ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The project addresses in the theoretical part of the hydraulics of solar systems and her components, which are used to design a solar system on apartment house. Solar systém addresses praparation hot water in two variants of the solution. In the first alternative solution is used low flow and 15 l/hod.m2 support stratification. In the second variant is used higher flow 20 l/hod.m2 without support stratification. In the experimental part is solved by the data analysis of the same apartment building, where the solar system are already installed and operated. Some data from the measurement was taken into account and used in the design and calculation of both options.
|
|
|
Heating of housing complex
Molnár, Lukáš ; Počinková, Marcela (referee) ; Topič, Jan (advisor)
The aim of the diploma thesis is to design heating and hot water preparation in a complex of buildings consisting of retail space and two residential buildings. Retail space is heated using VRF system and apartment blocks are heated by gas boilers located in the mechanical room in the basement. Gas boilers are connected to heating system and storage water he-ater. The heating surface is created by tabular and tubular heating units. Heat consumption in apartments is measured by calorimeters with remote data collection system. The temperatu-re in each flat is controlled by an electrically powered zone valve.
|
|
|
With wall heating systems
Bendová, Martina ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
This work deals with the topic "Systems with wall heating". On this theme is elaborated theoretical part. Further experimental part, which deals with the measurement of wall heating and comparing the results with the software CalA. Subsequently, this topic is applied to the specified building in which the wall heating, among other things dealt with. The project addresses the design of central heating, water heating, water heater design power units and air tempering lawn for future newly built free-standing facilities football club. The project is designed in two versions. In the first variant of the heat source heat pumps air-water. In the second variant is the heat source hot water pipe which is connected to transfer water-water station with plate heat exchangers.
|
|
|
Adjustment of the heating system of the building
Balíková, Anna ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
This bachelor thesis deals with an issue of heating solutions, theoretically describes the current technological possibilities in the area of heat sources. The acquired knowledge is used in the computational part of the thesis, where the design of heating and hot water heating of the educational institute for problematic youth in the village Střílky is solved. The building consists of one underground level and three floors. Gas condensing boilers are the source of the heat. The radiators in the whole building are designed as sectional radiators. Due to the type of the building, emphasis is placed on the physical and mechanical resistance of the individual elements of the radiators. The final technical report and drawing documentation are included in the conclusion.
|
|
| |
|
|
Heating the residence of the company
Kohlová, Vendula ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The bachelor thesis solves a heating and a hot water preparation in an office building with a flat. The thesis is divided into three parts – theoretical, computing and project. The theoretical part is dedicated to radiators and their armatures. The computing part consists of heating losses calculations, sizing the heating system and design of two options of heat source with comparing investment costs. The project includes a technical report and a drawing documentation.
|
|
|
Heating of flat house
Jára, Marek ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
The theme of this diploma thesis is to design heating of the flat house. The theoretical part of this diploma thesis is about exhaust gases paths. The calculation part of this diploma thesis contains the design of the heating system by panel heaters, floor convectors and underfloor heating system. The heat source is the system of cascade-connected gas condensing boilers. The rest of this part are the calculations of the preparation of hot water, design of hot water storage tank and another necessary equipment of the system. The part Project is about technical report and simulation of behaviour of underfloor heating system in various marginal conditions.
|
guest ::
