|
|
Concept of linear motors measurement workplace
Knobloch, Jan ; Červinka, Dalibor (referee) ; Klíma, Bohumil (advisor)
Master’s thesis handles about measurement on linear motors. Acts about set of two linear machines on one rail. One is motor and second is load. Thesis paies their mathematical description, control and measurement. It’s made measurement of the linear motor load characteristic. Next measurement have to do with losses in the converter. Is chosen measuring instrument t for measurement during working cycle. During working cycle has determine power eciency of entire drive.
|
|
|
Modification of a diesel generator for parallel operation with the grid
Černý, Martin ; Ctibor, Jiří (referee) ; Knobloch, Jan (advisor)
This works applies the idea of adjustment an engine-generator, so it is possible to connect an engine-generator, or other type of a generator, to the electricity. Consequently, the machine can transform the power supply without an outage. This work concerns the complex approach, provides the descriptions of particular parts, sensors and active components of a motor-generator and includes the explanation of their function. Further research is focused on designing and drawing a plan with a choice of a control unit for the whole system. Finally, the work deals with the complex implementation and testing the machine in real operation.
|
|
|
Single-phase wattmeter
Kolouch, Petr ; Knobloch, Jan (referee) ; Huták, Petr (advisor)
This diploma thesis deals with wattmeters. The introduction is devoted to approach the issue. Subsequently, the principle of sensing of circumferential quantities, sampling theory and basic theory is explained. The next chapter discusses Arduino development kits. The practical part deals with the design of the circuit diagram and the printed circuit board. Further described is designed software. The final part tests the parameters of the designed power meter.
|
|
|
Iverter for three-phase motor
Mikuška, Martin ; Červinka, Dalibor (referee) ; Knobloch, Jan (advisor)
This master’s thesis goes into design of particular circuits for three phase inverter. Inverter’s control is ensured by digital signal controller MC56F8013 with his program. Principle of control is suggested for individual motors. Inverter design considerate universal use and capability for any three phase motor. Particular blocks are compatible each other.
|
|
|
BLDC motor control
Kabelka, Ondřej ; Ctibor, Jiří (referee) ; Knobloch, Jan (advisor)
The thesis deals in the control of the BLDC motor. At first, there is a brief introduction of BLDC motor, in the next chapters are explained possible methods of control. The next part of the thesis deals with the platform STM32, on which the control algorithm is implemented. For the thesis a program for sensor and sensorless control of BLDC motor has been created. In the conclusion, the process of voltage and current has been measured, using the created algorithm.
|
|
|
Two-quadrant regulated power supply for laboratory purposes
Kalus, Jiří ; Vorel, Pavel (referee) ; Knobloch, Jan (advisor)
The main goal of the bachelor´s thesis is a suggestion of switching power supply with energy absorption for the case of two-quadrant load. The source includes of three parts: the power for the control circuit, single-converter and absorber of the recovered energy. Output power source is 400 W and output voltage 0 to 40 V, current +10 / - 10 A. This bachelor´s thesis deals with the first half of the circuit description and the second part there are analysis and the suggestion. Scheme and printed circuit cards are in attachment.
|
|
|
Microprocessor controlled inverter for motors
Fiala, Michal ; Červinka, Dalibor (referee) ; Knobloch, Jan (advisor)
This diploma thesis deals with design of universal converter used for motor control by microcontroller. The first part contains concept, functional overview of the device and its parts. The next part deals with mechanical design and construction of the converter and dimensioning of power, control and measurement circuits. The following part describes control algoritm used for three-phase motor and its testing using simulation. The final chapter of the thesis describes PCB mounting and testing of the device and control algoritm on real motor.
|
|
|
Use of a programmable logic controller in teaching process
Malý, Jan ; Knobloch, Jan (referee) ; Červinka, Dalibor (advisor)
Bachelor thesis is divided into four parts. First part concentrates on programming languages used for programming a PLC. These are divided into graphical and text languages. Graphical languages consist of ladder diagram and function block diagram. Text languages are Structured text and instruction list. Each of these languages are described in subchapters. Second part deals with description of three laboratory tasks. The last part contains pictures a information about laboratory task’s made equipment.
|
|
|
Microprocessor controlled BLDC motor inverter realization
Mikuška, Martin ; Cipín, Radoslav (referee) ; Knobloch, Jan (advisor)
This bachelor’s thesis goes into electronic commutated motors, their inverters and specific parts of the general pulse converter. Next it is described step-down converters, push-pull converters and the principles that are supported by practical exercises. The next part describes the design of the power transistors driver and problems of galvanic separation by optocouplers.
|
|
|
Portable source for induction heating
Nevřela, Tomáš ; Martiš, Jan (referee) ; Knobloch, Jan (advisor)
The aim of this work is to realize and test a prototype portable source for induction heating of small parts. The project contains a theoretical basis of resonant circuits and induction heating. The device design is based on simulation results from the FEMM program, with which a focussing coil for induction heating has been designed. The parts of the thesis are the realization of the designed device, its putting into operation and the programming of the control.
|
guest ::
