Hlavní stránka > Výsledky hledání: keywords:"ortogonální řezání"
Hledej:
Tipy pro vyhledávaní :: Rozšířené hledání
Hledej ve sbírkách:
Seřadit podle: Zobrazit výsledky: Výstupní formát:
Národní úložiště šedé literatury Nalezeno 2 záznamů.  Hledání trvalo 0.00 vteřin. 
On the cutting performace of selected process fluids in the MQL application
 Pazdera, Lukáš ; Polzer, Aleš (oponent) ; Píška, Miroslav (vedoucí práce)
This paper deals with the Minimal Quantity Lubrication (MQL) application. The aim is to compare experimentally the performance of 4 different cutting oils. The oils will be called A, B, C and D and their elementary characteristics are listed in the chapter Experimental part. Their commercial designations won´t be mentioned because of confidentiality reasons. The performance of the oils will be tested at turning orthogonal cutting and drilling. Two workpiece materials are used for the both operations: stainless steel AISI 316L and aluminum alloy EN-AW 7020. Evaluated parameters for turning and drilling tests are the cutting forces, the maximum temperature and the surface roughness. The experimental part is preceded by bibliographic research about cutting fluid, the MQL application in general, the machining operation (orthogonal cutting and drilling) with accent on the fluid application and the measurement of the temperature and cutting forces.
Úplný záznam
On the cutting performace of selected process fluids in the MQL application
 Pazdera, Lukáš ; Polzer, Aleš (oponent) ; Píška, Miroslav (vedoucí práce)
This paper deals with the Minimal Quantity Lubrication (MQL) application. The aim is to compare experimentally the performance of 4 different cutting oils. The oils will be called A, B, C and D and their elementary characteristics are listed in the chapter Experimental part. Their commercial designations won´t be mentioned because of confidentiality reasons. The performance of the oils will be tested at turning orthogonal cutting and drilling. Two workpiece materials are used for the both operations: stainless steel AISI 316L and aluminum alloy EN-AW 7020. Evaluated parameters for turning and drilling tests are the cutting forces, the maximum temperature and the surface roughness. The experimental part is preceded by bibliographic research about cutting fluid, the MQL application in general, the machining operation (orthogonal cutting and drilling) with accent on the fluid application and the measurement of the temperature and cutting forces.
Úplný záznam

Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.
Digitální repozitář :: Hledej :: Nový záznam :: Personalizace :: Nápověda
Powered by Invenio v1.1.2
Spravuje admin.invenio@techlib.cz
Tato stránka je dostupná také v následujících jazycích:
Česky  English