|
|
Composition of Municipal Waste
Straka, David ; Musilová, Petra (referee) ; Elbl, Patrik (advisor)
This bachelor thesis deals with the composition of municipal and mixed municipal waste. Introduction of the research part deals with the composition and properties of waste. In the next section, the waste is considered as fuel and compared with conventional solid fuels. The conculusion of the research part is devoted to the research of the waste composition from selected incinerators adn foreign countries. The compulational part of the thesis deals with the determation of energy properties of the waste.
|
|
|
Mechanical-biological waste treatment techniques
Wildová, Kristýna ; Gregor, Jiří (referee) ; Kropáč, Jiří (advisor)
This bachelor’s thesis focuses on description of various possibilities of municipal waste treatment in czech waste management system, focusing on potential realisation of mechanical-biological treatment of waste (MBT) in our area. Data analysis of foreign MBT units is included in the thesis, based on this analysis three different model layouts of technology were specified. The findings from foreign MBT units are then being used to creation and setting of a calculation tool, which is the main result of this thesis. The tool is based on residual waste composition and production data and it is able to estimate attainable production and presumptive parameters of MBT technology products.
|
|
|
Higher Heating Value of Sewage Sludge
Mikluš, Michal ; Bělohradský, Petr (referee) ; Houdková, Lucie (advisor)
The thesis is focused on problems of thermal treatment of sludge from wastewater treatment plants. The main objective is to establish a formula for calculating higher heating value (HHV) and lower heating value (LHV) of sludge based on its chemical analysis. The work is divided into two main parts: The theoretical part deals with the characteristics of sludge, thermal treatment of sludge, it isn´t omitted higher heating value and lower heating value. The main topic of a practical part is formulation of eguations for HHV and LHV calculation. Chemical analysis of sludge samples were supplied by TÜV NORD Czech s.r.o., together with the values of HHV and LHV. The calculations were verified by the program MINITAB.
|
|
|
Comparison of methods of determination of LHV and HHV
Jahn, Jiří ; Lisý, Martin (referee) ; Baláš, Marek (advisor)
This bachelor thesis is focused on the comparison of the accuracy of the determine of the higher heating value and lower heating value using the equations. The calculation is based on the contents of samples in the fuel, ie from the data obtained by ultimate analysis. Higher heating value and lower heating value of each fuel type was obtained by calorimeter measurement and considered to be the exact value of the fuel. The output of the work is the evaluation of suitability and accuracy of the examined equations and introduction equations appropriate for biomass.
|
|
| |
|
|
Condensing technology and flue gas
Müller, Jan ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
This thesis is developed as a proposal for heating for a primary school and kindergarten in the region of Brno-countryside. For the insulated building, a combination of heating and air-conditioning is proposed. The concept is designed so that the air-conditioning preheats the exterior air and the heating system warms the incoming air to a comfortable temperature. For the required thermal performance, sources of heat (for gas and pellets) and a layout solution for the boiler room is designed. Drainage of combustion products is proposed for both solutions. The project solution is per the extent of the construction permit. The theoretical part is linked with the practical part through the condensation boilers, their function and division, and drainage of combustion products. The experiment for the given topic was conducted on the drainage of combustion products. The pressure loss of the reverse knob was determined in relation to the flow rate of air in the condensation boilers as this loss is essential in assessing the drainage of combustion products.
|
|
|
Sludge disposal from wastewater treatment plants in case of transport and sludge incineration
Petříčková, Alena ; Šomplák, Radovan (referee) ; Frýba, Lukáš (advisor)
The bachelor´s thesis in theoretical part deals with the disposal of sludge with respect to legislation, method of sludge treatment and drying technologies. This part is also dedicated to traffic connected with sludge. The practical part includes the calculation of combustion heat and calorific value. This section is also deals with summarization production of sludge and sludge treatment, analysis of these data. This part also includes an overview of the mass flow of sludge across the Czech Republic at locations with extended powers.
|
|
|
Biomass preparation and combustion technologies
Venhoda, Tomáš ; Recman, Milan (referee) ; Juřena, Tomáš (advisor)
The aim of this work is to provide for background research about preparation and combustion of biomass. Technologies for preparation of biomass including ingathering prior to combustion are described in the first part of this work. Different ways combustion of biomass and comparison of different types of grates are in the second part of the thesis.
|
|
|
Burning pellets from non-wood biomass in boilers I
Knob, Jan ; Zejda, Vojtěch (referee) ; Brummer, Vladimír (advisor)
This bachelor’s thesis deals with combustion of non-woody biomass pellets in boilers. In the first part of the background research, biomass is generally described in terms of fuel properties, with a focus on characteristics determining its suitability for a direct combustion in boilers and undesirable emissions. In this context, planned legislative restrictions of boilers with a lower operating power are summarized. Furthermore the usage of the automatic boilers, and specific problems associated with combustion of non-woody pellets are described. Final part of the background research focuses on a composition of commercially available non-woody pellets and their production. Experimental part consists of fuel analysis determining the general properties of the biofuel - i.e. the water and ash content, essential content of elements, lower and higher heating values. Results of analysis are used to put together fuel lists of tested pellets. Conclusion of the experimental part discusses the influence of the pellet composition on the boiler functionality and emissions.
|
|
|
Utilization of unconventional biomass for energy production
Boumová, Markéta ; Kropáč, Jiří (referee) ; Pavlas, Martin (advisor)
Tato diplomová práce se zabývá netradičními druhy biomasy využitelnými v České republice a Španělsku a jejich srovnáním. V prvních kapitolách jsou popsány netradiční druhy biomasy, mezinárodní projekty, smlouvy a legislativa. V následujích kapitolách je rozbor netradičních druhů biomasy zejména vznikajících z potravinářského průmyslu každé země s detailním rozborem a srovnáním zbytků z průmyslového zpracování slunečnice a oliv. V závěru je uděláno celkové srovnání těchto druhů biomasy České republiky a Španělska z aspektů výkupních cen, výhřevností, vlhkosti a množství popelovin.
|
guest ::
