|
|
Adaptive OFDM
Nowak, Dan ; Valenta, Václav (referee) ; Maršálek, Roman (advisor)
The purpose of this paper is to study the possibilities of the OFDM system adaptive modulation. The study presents mechanism for acquiring the necessary data of every frequency subchannel using pilot signals and application of these data for system adjustment. The paper introduces the water-filling principle for subchannel power allocation on the basis of their SNR and adaptive modulation mechanisms for variety of OFDM usage. These mechanisms are implemented into a MATLAB model. The code is then transformed into graphical representation and using USRP2, the signal is transmitted by real world channel.
|
|
|
Model of physical layer of communication system IEEE 802.11ah
Jurák, Petr ; Staněk, Miroslav (referee) ; Polák, Ladislav (advisor)
This diploma thesis deals with the analysis of the IEEE 802.11ah wireless communication system. For such a purpose, an appropriate simulation model in program environment MATLAB is created. The first part of thesis focuses on the IEEE 802.11 standard. Basic blocks of the transmitter and receiver are described. Attention is also devoted on the brief description of considered transmission channels. The second part contains the description of the proposed and realized simulation model in MATLAB. Individual blocks of the simulation model are described in details. Finally, the obtained simulation results are evaluated and discussed.
|
|
|
Simulation of the DVB-C and DVB-C2 transmission and their comparison
Cibulka, Tomáš ; Hüttl, Ondřej (referee) ; Polák, Ladislav (advisor)
This Master thesis deals with description, analysis and simulation of standards of digital video broadcasting DVB-C and DVB-C2. There is described mainly the transmission system, channel coding, type of modulation and OFDM symbols generation. Furthermore, channel models, used for the exploring of their performances are described too. There was created an application with a graphical interface in MATLAB, which simulates transmission in DVB-C2. Based on simulations there are compared influences of each settings on bit error rate of data transmission for both standards. Finally, obtained simulation results are compared with theoretical values.
|
|
|
Laboratory workplace for measuring performances of DVB-T2/T2-Lite
Youssefová, Kristina ; Kratochvíl, Tomáš (referee) ; Polák, Ladislav (advisor)
Tato práce se zaměřuje na zkoumání vlastností standardu pro digitální televizní vysílání přes pozemní vysílače (DVB-T2). Dělí na tři hlavní části. V první části je prozkoumán řetězec signálového zpracování DVB-T2. Ohled je rovněž brán na možný nepoměr I/Q v modulátoru OFDM. V druhé části je navrhnuté laboratorní měřící pracoviště pro měření vlastností systému DVB-T2. Ve třetí části je ověřena správnost navrhnutého postupu pomocí rozsáhlých experimentálních měření. Součástí této práce byl návrh laboratorní úlohy, která se zabývá měřením různých přenosových scénářů DVB-T2.
|
|
|
The Optical Fibre Dispersion Effects on Multiplex Transmission Systems
Kyselák, Martin ; Filka, Miloslav (advisor)
This doctoral thesis deals with present trend to turn up the bit rate of the optical fibres making use of wavelenght multiplex systems. There are new theoretical and practical problems caused by the new technologies. Except the known modal dispersion there exist problems caused by chromatical and polarization mode dispersion. In the opening of the thesis the known effects, which influence the payload signal, are introduced. The polarization mode dispersion has the main attention. Within the scope of this thesis there has been programmed the statistical calculator which can analyses the measured values of differential group delay by Monte Carlo calculation. Next meaningful output is the designating application of the optical routes. It is possible to mathematicaly unambiguously define the polarization mode dispersion by Jones, Stokes and Poynting vectors. This complicated calculations are mechanized and in the simulation application make possible to simulate the signification of the PMD influence at different input parameters. The thesis includes the study of the PMD modulation format impact with the results of simulations and confrontation with other scientists results. The significant output are the final practical results examinations, which can be implemented thanks to the possibility of using the FTB-5500B measuring device.
|
|
|
Simulation of the RF transmission channel for the DVB-T2
Strouhal, Adam ; Hüttl, Ondřej (referee) ; Polák, Ladislav (advisor)
This Master thesis is focused on detailed description of the DVB-T2 system. This work deals with the description of the particular parts of models and with typical RF transmission channels for fixed and mobile reception. In order to simulate the impact of the fading transmission channels on the transmitted signal there was developed an appropriate application in MATLAB. The graphic user interface of this application allows set the transmission parameters of DVB-T2 and the parameters of the transmission channels. Results of simulations with various settings are evaluated and compared with the results, obtained from the DVB-T measurements.
|
|
|
Wireless transmission interference modeling (AWGN, Rayleigh, Rice fading channels)
Hloušek, Tomáš ; Gleissner, Filip (referee) ; Mikulka, Jan (advisor)
This thesis describes and models wirelesss transmission intereferences in real communication channels. A signal received on a fading channel is subjected to a multiplicative distortion and to the usual additive noise. Real channel adds to the signal noise and fadings. Gaussian noise is a result of channel awgn. Fadings is implicated by multipath propagation of signal in Rayleigh and Rician channels. Main goal of this project is to program BERsolve, which is created in tool GUIDE in Matlab. User program BERsolve makes it possible to analyse bit error rate and symbol error rate for some types of channel models, which are defined by standard COST207. BERsolve offers some other functions i.e. display time behaviour, constellation diagram and spectrum. This program provides us with an overview representation of problem by multipath interferences in communication channels.
|
|
|
Modulation technique design for radio channels with interference
Bělohlávek, Jiří ; Kubánková, Anna (referee) ; Pust, Radim (advisor)
This thesis concisely describes essential type of modulation technique for transmission of binary signal. In introductory part there are summarized advantages and disadvantages for each described modulation technique. There are described proceeding of modulation and demodulation too. Next part is specialized mainly to determination of incorrect receiving probability. For each modulation technique are calculated theoretical values of bit error rate and compiled graph. In practical part there are described possibilities of Matlab platform for measurement of bit error rate. In implement Simulink there is built model of communication channel with additional AWGN channel. Graphs are constructed from simulation data by the help of model’s control script. On selected modulation technique are inspected various elements which are reacted with graph. In finale part there are compared theoretical and measured values and summarized analysis.
|
|
|
Model of communication system with the PLC channel
Kovařík, Tomáš ; Krajsa, Ondřej (referee) ; Mlýnek, Petr (advisor)
The aim of this work was to develop a model of a communication system with the PLC channel. The model contains different types of modulations with the possibility of their settings. The impact of a disturbance on different numbers of states QAM modulation has been evaluated. The theoretical part describes the PLC technology with its functions and the most widely used narrowband modulation.
|
|
|
Laboratory workplace for measurement of DVB-T2 MISO broadcasting
Bárta, Vojtěch ; Kratochvíl, Tomáš (referee) ; Polák, Ladislav (advisor)
This bachelor thesis deals with measurement and analysis of DVB-T2 MISO broadcasts. The theoretical part of the thesis describes the broadcasting chain of the DVB-T2 system at the level of the physical layers. Attention is paid to both SISO and MISO transmit modes. In the experimental part of the work is to design a measuring workplace for monitoring and analysis of DVB-T2 MISO transmission in laboratory conditions. The functionality of the proposed concept and chosen measuring methodology was verified by a set of experimental measurements.
|
guest ::
