|
|
Process control of a distillery
Sejkora, Martin ; Kopečný, Lukáš (referee) ; Veselý, Libor (advisor)
This master‘s thesis deals with the design of a control system for a distillation column. It deals with the issue of distillate production and acquaints the reader with the necessary knowledge that is necessary to understand the purpose of the work. The practical part of the work presents a specific distillation column, the means for its control and the method of implementation of the control system, then the visualization of the control system and the method of control. Part of the work is the evaluation of the results and benefits of the work.
|
|
|
High frequency signal injection method for PMSM position estimation
Moravec, Vojtěch ; Veselý, Libor (referee) ; Pohl, Lukáš (advisor)
This thesis is focused on the design of vector control of interior permanent magnet synchronous motors. The first part of this work deals with vector control transformations and mathematical modelling of synchronous motors. Furthermore, algorithms of sensorless control are discussed, especially HF injection sensorless methods. One of these methods was used for torque and speed control. Problem of phase delay caused by filters and it’s compensation is also discused. One of the HF injection sensorless method was implemented on both motors. The results of simulations in MATLAB/Simulink and tests of real motors on dSpace are included.
|
|
|
Control of proportional directional control valves
Hoferek, Martin ; Otava, Lukáš (referee) ; Veselý, Libor (advisor)
The thesis deals with design and implementation of proportional hydraulic valve, which will be integrated to hydraulic system of small hydro in Rájec - Jestřebí. This valve will be used to control one of the wicket gates of double Francis turbine. The thesis is processed for the company Mavel a.s., which is the owner of SH. The goal of this thesis is to create control of the valve according to the client's requirements, its implementation to the control system and commissioning.
|
|
|
Mobile robot control system
Kalina, Michal ; Veselý, Libor (referee) ; Hynčica, Ondřej (advisor)
This thesis deals with building of two-wheeled mobile robot and consecutive creation of drivers and control for sensors, engines and controller design. The control is based on Arduino platform using ATmega328 processor. Firstly there is in this thesis recherche. Part of this thesis is modelling one where simulation model of our system is created, its linearization and then controller design. Further it contains description of the building robots body, description and functionallity of used engines, description of all sensors and detailed description of available printed circuit board. In the end there is software part where the engines control is described, operation of the sensors and functionallity of the controller. Result of this thesis is function application of controlling and operating of two-wheeled unstable mobile robot.
|
|
|
MIL real time simulation of electrical motors
Bartík, Ondřej ; Veselý, Libor (referee) ; Blaha, Petr (advisor)
The goal of this thesis is how to implement the two different types of the electric alternate motors in ZYNQ-7000 device for MIL real-time simulation purposes. The chosen types of motors are BLDC motor and AC induction motor. Mathematics models of these motor, the necessary changes for implementation purposes and the way how the models were implemented in ZYNQ-7000 device are described in this work. Three different experimental MIL simulation, using these motors ae described at the end of this thesis.
|
|
|
Identification of DC motor parameters
Kabelka, Ondřej ; Veselý, Libor (referee) ; Pohl, Lukáš (advisor)
This bachelor´s thesis deals with identification of parameters of the DC motor. An identification program in LabVIEW with data processing in Matlab has been created. After the identification of electrical and mechanical parameters of the motor there are current regulators and velocity regulators designed and implemented in the LabVIEW enviroment as a verification of the correctness of the identification.
|
|
|
Motion control of an aileron
Kotrlý, Michal ; Kozubík, Michal (referee) ; Veselý, Libor (advisor)
This bachelor’s thesis aims to design, assemble and test an electromechanical model of an aileron with a dual actuator configuration that would verify used control algorithms. Mainly those that mitigate force fight between actuators and reduce mechanical stress affecting lifespan of the aileron. Algorithms are implemented in a PLC which supplies power to actuators/sensors and controls the position and movement of the aileron.
|
|
|
Permanent Magnet Synchronous Machine Sensorless Control Algorithms
Veselý, Libor ; Prokop, Roman (referee) ; Melichar,, Jiří (referee) ; Václavek, Pavel (advisor)
Algorithms of sensorless control of surface permanent magnet synchronous motors are discussed in the dissertation thesis. A method for position and speed estimation in high-speed region based on model reference adaptive system is described. Furthermore, classical approach using Kalman filtering was verified. Kalman filter expected the rotor speed to be constant as a modification of model using variable speed approach. These algorithms are not able to work at low speed region, thus a new method was proposed. This method is designed on extended Kalman filtering and uses the model which describes the stator inductance changes in - coordinates. At motor start, knowledge of initial rotor setup is required. The algorithm for initial rotor angle using high frequencies injected into the motor was proposed.
|
|
|
Technology Design Components Bearing Cover
Veselý, Libor ; Prokop, Jaroslav (referee) ; Kalivoda, Milan (advisor)
This bachelor thesis deals with the design technology for product components "bearing cover“ in two variants. The first of them is designed for the production of one-piece components in company conditons. The second is concerned with the design technology for serial production of the same components using machines and tools from current production. The thesis contains designs for semi-finished components, the selection of machines from the company fleet, the design of suitable tools and cutting conditions. An economic evaluation deals with the determination of machining times for both variants of production. The proposed technology will be used for the real production of components.
|
|
|
Alternative control SW for dedicated thermal performance chambers with customized UI
Žlebek, Jan ; Veselý, Libor (referee) ; Václavek, Pavel (advisor)
This thesis is oriented on simulating thermal chambers, their SW and HW and improving SW to meet specifications. Testing problematics connected with this thesis is briefly mentioned also. Thermal chambers used here are dedicated to run simulating test procedures for thermostats and similar devices designed to sense temperature and regulate it. Design and realisation of new SW are clarified in latter chapters of this thesis, as well as evaluating functionality and resulting dynamics and accuracy.
|
guest ::
RSS feed.