|
| |
|
|
Design of asphalt concrete mixture and determinantion of the resistance against permanent deformation
Němec, Jan ; Matoušek, David (referee) ; Varaus, Michal (advisor)
This bachelor thesis deals with the problem regarding asphalt concrete mixtures, concretely ACO 11+. This type of mixture has low resistance to permanent deformation (rutting) while high temperatures are present. The binder and aggregate tests regarding physical and mechanical properties were carried out. Subsequently the new mixture was designed on the basis of stricter requirement for grading envelope and air void content. The design mixture was tested for resistance to permanent deformation. From the obtained results the change in the national annex of the standard ČSN EN 13108-1 is considered in terms of change in testing temperature for some kinds of binders. The same tests were conducted in others asphalt laboratories in the Czech Republic to ensure the maximum comparability.
|
|
| |
|
|
Adhesion of the materials for the horizontal marking
Šašinková, Daniela ; Dašek, Ondřej (referee) ; Varaus, Michal (advisor)
The presented bachelor thesis deals with the adhesion of materials for horizontal road marking in the case of renewal of marking and two-phase marking. Within the work specified parameters were measured and evaluated. The theoretical part describes the initial situation and is followed by the general characteristic of the horizontal road marking. Further, there are also described individual tests performed on horizontal road marking carried out within the presented bachelor thesis. The practical part deals with the preparation, production and description of the samples that have been used for this work. The evaluation of the measurements carried out on all testing samples of the marking follows. All evaluations are based on test results and photo documentation.
|
|
|
News in the field of the road construction
Zelenka, Lukáš ; Zajíček, Jan (referee) ; Varaus, Michal (advisor)
The bachelor’s thesis focuses on new technological equipment for transport and paving of asphalt mixtures. Specifically, it is a thermo superstructure with an extrusion face and a homogenization tank of an asphalt mixture. The advantages of these machines and their positive influence on the quality of the work are described. Subsequently, the researches which confirm it are described. The last chapter describes recommendations for the contracting authority to require the use of these technologies in tenders.
|
|
|
Observation of the development of bituminous binder from asphalt mixture with RAP.
Eliáš, Radim ; Koudelka, Tomáš (referee) ; Varaus, Michal (advisor)
The work is focused on the development of properties of asphalt binder extracted from an asphalt mixture with RAP, which monitors the difference between properties of the binder during laying and then after a period of 6 months after laying of asphalt. In the theoretical part are simply described the various ways of recycling of a flexible pavement, asphalt mix production with the addition of 25% R-cold material and methods of individual tests to determine the properties of the asphalt binder. The practical part deals with the comparison of the results of asphalt binder properties described in the theoretical part is evaluated and the overall aging of the asphalt mix.
|
|
|
Influence of the sample preparation on the stiffness of asphalt mixtures
Pěch, Pavel ; Hýzl,, Petr (referee) ; Varaus, Michal (advisor)
The Bachelor thesis deals with influence of the preparation of probationary bodies to determine of modulus of stiffness. Bodies in the form trapezoid are prepared in two different ways - with trimming and without trimming of all surfaces of the upper and lower party. This way prepared bodies are tested and is determined two-point test for modulus of stiffness. The results of tests are mutually compared.
|
|
|
Use of special binders for recycling of asphalt mixtures at mixing plants
Pěch, Pavel ; Špaček, Petr (referee) ; Varaus, Michal (advisor)
The thesis deals with the matter of usage of special asphalt binders for production of asphalt mixtures containing recycled materials in asphalt plant. For comparison analysis of characteristics of special binder used in roads is necessary to compose different mixtures of asphalt – one with binder containing R-materials, and another benchmark mixture with binder used in common mixtures without recycled materials. Investigation of features of mixtures with different binders is carried out by selected performance tests of asphalt mixtures. Evaluation and comparison of the results is described in the final section of the thesis.
|
|
|
Asphalt concrete with reclaimed material - design
Kučerová, Marcela ; Koudelka, Tomáš (referee) ; Varaus, Michal (advisor)
Bachelor thesis is focused on the design and testing of asphalt mix type asphalt concrete containing R-material. The theoretical part is dedicated to the RAP in asphalt mixtures produced by hot, in particular the specifics during design and manufacture of asphalt mixture. Next there is introduced further information relating to the functional characteristics of asphalt mixtures and the influence of R-material on them. The practical part describes the designs and testings on mixtures ACO 11+ and 11+ 50% RAP. In order to compare the proposed mixtures were carried out tests of low thermal attributes according to ČSN EN 12697-46 and cracking using uniaxial tensile test according to ČSN EN 12697-46.
|
|
| |
guest ::
