|
|
Biodegradable plastics
Schifferová, Zuzana ; Jan, Vít (referee) ; Molliková, Eva (advisor)
The aim of this bachelor theses is to discuss the process of biodegradation occurring with biodegradable polymers including factors affecting this process. The theses also introduces some types of biodegradable plastics including their properties. At last it discusses waste management of these plastics and their ecological impact.
|
|
|
Electrospinning of composite fiberous structures for piezoapplications
Schifferová, Zuzana ; Kaštyl, Jaroslav (referee) ; Částková, Klára (advisor)
Polymer and composite polymer-ceramic nanofibers were prepared by electrospinning process. Solution of 20 wt.% polyvinylidene fluoride (PVDF) in a mixture of dimethyl sulfoxide (DMSO) and acetone in the ratio of 7:3 was chosen as the most suitable precursor. When preparing composite nanofibers, 20 wt.% of barium calcium zirconate titanate (BCZT) or barium titanate (BT) nanoparticles was added to this PVDF solution. Given parameters were defined as the most suitable for the process of electrospinning: voltage of 50 kV, feeding rate of 30 l/min, distance between emitter and collector of 20 cm and needle diameter of 17 G. The effect of polymer molecular weight and the rotation speed of collector was also studied. Various properties of prepared samples were studied: morphology and fiber diameter, phase composition with the use of x-ray diffraction and Fourier transform infrared spectroscopy and also chosen electrical properties. Lower fiber diameters appeared with lower polymer molecular weight and higher rotation speed of the collector. These parameters resulted in higher percentage of the piezoelectric phase as well. The smallest achieved fiber diameter was around 300 nm, the highest percentage of phase was 92 % and the highest piezoelectric constant had a value of 16 pC/N. Composite fibers filled with BT particles showed better properties that the ones filled with BCZT particles.
|
|
|
Electrospinning of composite fiberous structures for piezoapplications
Schifferová, Zuzana ; Kaštyl, Jaroslav (referee) ; Částková, Klára (advisor)
Polymer and composite polymer-ceramic nanofibers were prepared by electrospinning process. Solution of 20 wt.% polyvinylidene fluoride (PVDF) in a mixture of dimethyl sulfoxide (DMSO) and acetone in the ratio of 7:3 was chosen as the most suitable precursor. When preparing composite nanofibers, 20 wt.% of barium calcium zirconate titanate (BCZT) or barium titanate (BT) nanoparticles was added to this PVDF solution. Given parameters were defined as the most suitable for the process of electrospinning: voltage of 50 kV, feeding rate of 30 l/min, distance between emitter and collector of 20 cm and needle diameter of 17 G. The effect of polymer molecular weight and the rotation speed of collector was also studied. Various properties of prepared samples were studied: morphology and fiber diameter, phase composition with the use of x-ray diffraction and Fourier transform infrared spectroscopy and also chosen electrical properties. Lower fiber diameters appeared with lower polymer molecular weight and higher rotation speed of the collector. These parameters resulted in higher percentage of the piezoelectric phase as well. The smallest achieved fiber diameter was around 300 nm, the highest percentage of phase was 92 % and the highest piezoelectric constant had a value of 16 pC/N. Composite fibers filled with BT particles showed better properties that the ones filled with BCZT particles.
|
|
|
Biodegradable plastics
Schifferová, Zuzana ; Jan, Vít (referee) ; Molliková, Eva (advisor)
The aim of this bachelor theses is to discuss the process of biodegradation occurring with biodegradable polymers including factors affecting this process. The theses also introduces some types of biodegradable plastics including their properties. At last it discusses waste management of these plastics and their ecological impact.
|
guest ::
