|
|
Calculations of steam condensers
Mifek, Roman ; Kilkovský, Bohuslav (referee) ; Jegla, Zdeněk (advisor)
This thesis deals with the calculation procedures for determining the heat transfer coefficient for steam condensers. The first section provides a basic overview for industrial steam condensers and possible procedure for selecting the appropriate type of tube condenser. The next section describes the types of condensation and equations for determining the heat transfer coefficient for various geometries of tubular condensers. In the final section there is performed practical calculation of condenser in Maple software using the above relations. The results obtained in this calculation are compared with the results obtained by professional computational software Chemcad and HTRI.
|
|
|
Design of modular tubular heat exchanger
Marx, Sven ; Turek, Vojtěch (referee) ; Jegla, Zdeněk (advisor)
Hlavním cílem této práce je seznámit se s požadavky specifické procesní aplikace a návrhem výměníku tepla s křížovým tokem pracovních látek a zhodnotit návrh předmětného výměníku pomocí simulačního softwaru. Nejprve jsou v práci prozkoumány provozní podmínky rekuperace odpadního tepla a obecné možnosti návrhu a jsou uvedeny základní rovnice pro tepelný a hydraulický výpočet. Hlavní část práce se zaměřuje na modulární trubkový výměník tepla s křížovým tokem pracovních látek navržený pro experimentální výzkum rekuperace tepla a zanášení ze znečištěných spalin produkovaných spalováním alternativních paliv na VUT v Brně (VUT) na Ústavu procesního inženýrství (UPI). Nejprve je stručně představena situace v testovací laboratoři. Poté je popsán postup návrhu předmětného tepelného výměníku pomocí softwaru HTRI a výsledky jsou shrnuty a porovnány s cílovými požadavky. Následně je analyzována distribuce toku vody v trubkovém prostoru uvnitř jednoho ze čtyř identických modulů výměníku tepla užitím softwaru CDF pomocí tří různých simulačních přístupů. Jsou popsány dva přístupy využívající model turbulence k--SST a jeden přístup využívající model turbulence k--Realizable turbulence. Nakonec jsou diskutovány rozdíly mezi přístupy a výsledky simulací distribuce toku.
|
|
| |
|
|
Modern technological elements for tubular heat exchangers
Plánková, Tereza ; Babička Fialová, Dominika (referee) ; Jegla, Zdeněk (advisor)
The aim of this diploma thesis is to get acquainted with modern technological elements currently used in shell-and-tube heat exchanger in the shell-side and tube-side, thermal-hydraulic calculation of selected elements and comparison of thermal-hydraulic properties with classically used competing technological elements. The work deals mainly with EM baffle in the tube-side and tube inserts like the twisted tape type (and its modifications) and coiled wire in the tube-side. The theoretical part is focused on acquaintance with classical technological elements in shell-and-tube heat exchanger and with basic thermal-hydraulic calculations, practical part then on acquaintance with modern elements and thermal-hydraulic calculation of selected elements. These calculations are then compared with the results of the thermo-hydraulic calculation of similar elements.
|
|
|
The Influence of Operating Parameters and Construction Parameters of the Process Burner on Stability and Combustion Processes Parameters
Skryja, Pavel ; Jegla, Zdeněk (referee) ; Odstrčil, Miloslav (referee) ; Stehlík, Petr (advisor)
The objectives of this paper focus upon composing recommendations with respect to burners design while observing aerodynamic, together with present and advanced developments in the field of flame technology principles. Specifically the aims are set at flame stability and pollutions. Important part of this paper is a novel design procedure dealing with premixed burners. Further, by exploiting the results of testing program enabled one to design burners exhibiting low level of nitrogen oxides emissions. On the basis of aerodynamic analysis of premixed burners flow path several recommendations on the geometry resulted in proposing two ejectors, which transport the combustion air. In the first ejector the fuel jet, generated by flow through a nozzle, draws the specified part of the combustion air, and then the mixture is a driving agent of the second ejector. The remaining part of combustion air flows first through the radial curved vanes, and second its tangential velocity component is augmented by axial vanes prior it enters mixing part of the second ejector. For the additional contribution to the rotating motion the inclined axial vanes built inside the nozzle of the second ejector are responsible. The resulting swirling number reaches the values up to 2.6. For the burner so arranged fire stability and low NOx emissions in the wide operating conditions can be expected. Within the frame of extensive testing program in the field of diffusion burners several modifications have been carried out such as setting of axial vanes which secure the swirling motion, changes of combustion air flows path, and modifications of secondary nozzles, these resulted in extending zone of stabilized flame and reducing the formation of NOx, e.g. NOx emissions of 70 ppm, prior the modifications, have dropped to 30 ppm (dry flue gas 3% O2). The main contribution of this paper stands in applications of development activities results in aerodynamic and flame within their implementation in the field of burners design. Further, it is the proposed design of burners which are capable of simultaneously firing products of the biomass microwave pyrolysis, namely syngas and bio-oils.
|
|
|
Modification of heat exchanger for steam generation
Pačíska, Tomáš ; Jegla, Zdeněk (referee) ; Nekvasil, Richard (advisor)
This graduation thesis is concerned with a thermal exchange unit issue whereof one working substance complies with a two-phase mode of a flow. This unit is made for the steam generation. The thesis is supposed to solve operation problems causes of the given unit and to make a proposal of an appropriate solution that is supported by performed calculations. Part of the the work is strength calculation. This work also introduces the thermal-hydraulic processes issue of the steam generation equipment. There are also performed thermal-hydraulic control calculations in consideration of newly set-up operation parameters of the given equipment‘s working substances.
|
|
|
Algorithm for automatic selection of suitable equipment type from heat exchanger database
Havlů, Michal ; Kohoutek, Josef (referee) ; Jegla, Zdeněk (advisor)
Thesis is devoted to development of an database algorithm for selection (or necking selection) of suitable type of heat exchanger for given industrial application. Database creates a part of multipurpose calculation system containing three individual modules: (i) module for selection (or necking selection) of type of heat exchanger for given application, (ii) module for thermal-hydraulic design or rating of heat exchanger, (iii) module for calculation of investments and operating cost. Thesis describes details of method for selection of suitable heat exchanger type for given application and presents and discuss individual criteria for selection process which influence values in tables of priorites for given equipment. These tables are unavoible part of selection algorithm. Details of software application of selection algorithm are also presented in the thesis. Description of behaviour of individual types of heat exchanger creates important part of thesis. Practical application of developed selection algorithm is demonstrated on several industrial examples.
|
|
| |
|
|
Design of chiller for specific application
Gaverník, Michal ; Kohoutek, Josef (referee) ; Jegla, Zdeněk (advisor)
This diploma thesis deals with design of chiller for specific aplication – The City Theatre in Brno. The solving equipment of cooling appliance includes complete design of heat exchanger, battery cold and dimensioning of pipeline system used for various media. One part of design is also choice of individual coolant pumps, which guarantee necessary cirkulation of cooling medium in a certain pipeline routes. Selected battery cold in this administration reduced the size of the necessary cooling resources, therefore the cost of implementation. Everything is processed in calculating software. The resulting proposal is also drafted in the design program and will serve as one of the bases for subsequent implementation.
|
|
|
Conception of Thermal Treatment of Waste from Municipal Sector
Frýba, Lukáš ; Jegla, Zdeněk (referee) ; Kos, Miroslav (referee) ; Bébar, Ladislav (advisor)
European Union and states of European Union legislation are updated according new information about the composition and content of danger compounds in the sewage sludge from municipal waste water treatment plants. It has the effect on using of modern technologies for disposal in sewage sludge treatment. These methods are designed for sewage sludge hygienization, amount reduction, material transformation for next using or sludge incineration for energy production and utilization. The thesis is focuses on the effective thermal treatment of sewage sludge from waste water treatment plants. An important part of the line for sewage sludge incineration is pre-treatment and reduction of water content. The water content reducing is a high energy consumption process which is helpfull to use waste heat from energy plants where it would be loosed without using.
|
guest ::
