|
|
Static analysis of residential building
Hanzlík, Petr ; Šopík, Leonard (referee) ; Zich, Miloš (advisor)
The discussion of the master’s thesis is static analysis of residental building. The thesis details the original solution from assesment and a new design variant solution. The work is focused on static solution of monolithic concrete plate with ribs and is devoted to limit states assessment of the plate with ribs. The thesis includes a time analysis structure and prestressed ribs in the new variant.
|
|
|
Suspension footbridge over the river Bečva
Sobková, Sára ; Šopík, Leonard (referee) ; Nečas, Radim (advisor)
The subject of this thesis is the design and assessment of a suspended footbridge for pedestrians over the Bečva River. Three variants of the crossing were created. The va-riant with a suspension structure was selected for detailed design. The chosen pede-strian footbridge is composed of two suspension cables supported by an inclined py-lon, anchored by a set of six anchoring cables. The design of the structure relied on finding the ideal geometry of the suspension cables. The computational model was created in the ANSYS Mechanical APDL 2023 R2 software. For the analysis of the deck in the transverse direction, model was created in the SCIA Engineer 21.1 software. The construction was assessed for ultimate limit state of serviceability and load-bearing capacity according to applicable standards, and a dynamic analysis was performed. The work includes clear and detailed drawings and visualizations.
|
|
|
Static solution of bridge on the highway Jánovce-Jablonov
Darebníček, Pavel ; Šopík, Leonard (referee) ; Zich, Miloš (advisor)
The subject of Diploma thesis is the design of bridge on the highway Jánovce - Jablonov and his static solution. Selected variant is made from four span 34+44+44+34m and supporting structure consist of monolithic two beams of prestressed concrete. Height of cross section is over the whole lenght of the bridge constant. Each beams will be built on sliding formwork. The design of supporting structure is made according to limit states, including addressing timing analysis. Calculation of the effects of loading is made by software and reviews are calculated by hand according to Eurocode.
|
|
|
Roof of the swimming pool
Pelikán, Adam ; Šopík, Leonard (referee) ; Stráský, Jiří (advisor)
This diploma thesis is about designing the structure of roof of swimming stadium. Three solutions are created - concrete arc with tie, steel truss slab and concrete pretensioned membrane. One choosed solution - concrete pretensioned membrane - is afterwards developed. In the beginning there are several designs of geometry fulfilling the requirements for given type of structure being created. In part of static calculation, the parametrical mathematical model in form of macro in APDL language for Ansys software has been created. Afterwards all the parameters (initial state of cables, level of pretension, dimensions of membrane and peripheral frame, etc.) has been optimized in order to the membrane be fulfilling criterias for ultimate limit state and serviceability limit state. Afterwards other selected parts of structure has been checked. On basis of designed geometry and design checks in static calculation the drawings of conctruction and designed parts has been created. In the end, the 3D model of the structure has been created in graphical software Rhinoceros. Then visualizations of structure in concstruction stages and after completion has been rendered.
|
|
|
Roof of the swimming pool
Pelikán, Adam ; Šopík, Leonard (referee) ; Stráský, Jiří (advisor)
This diploma thesis is about designing the structure of roof of swimming stadium. Three solutions are created - concrete arc with tie, steel truss slab and concrete pretensioned membrane. One choosed solution - concrete pretensioned membrane - is afterwards developed. In the beginning there are several designs of geometry fulfilling the requirements for given type of structure being created. In part of static calculation, the parametrical mathematical model in form of macro in APDL language for Ansys software has been created. Afterwards all the parameters (initial state of cables, level of pretension, dimensions of membrane and peripheral frame, etc.) has been optimized in order to the membrane be fulfilling criterias for ultimate limit state and serviceability limit state. Afterwards other selected parts of structure has been checked. On basis of designed geometry and design checks in static calculation the drawings of conctruction and designed parts has been created. In the end, the 3D model of the structure has been created in graphical software Rhinoceros. Then visualizations of structure in concstruction stages and after completion has been rendered.
|
|
|
Static analysis of residential building
Hanzlík, Petr ; Šopík, Leonard (referee) ; Zich, Miloš (advisor)
The discussion of the master’s thesis is static analysis of residental building. The thesis details the original solution from assesment and a new design variant solution. The work is focused on static solution of monolithic concrete plate with ribs and is devoted to limit states assessment of the plate with ribs. The thesis includes a time analysis structure and prestressed ribs in the new variant.
|
|
|
Static solution of bridge on the highway Jánovce-Jablonov
Darebníček, Pavel ; Šopík, Leonard (referee) ; Zich, Miloš (advisor)
The subject of Diploma thesis is the design of bridge on the highway Jánovce - Jablonov and his static solution. Selected variant is made from four span 34+44+44+34m and supporting structure consist of monolithic two beams of prestressed concrete. Height of cross section is over the whole lenght of the bridge constant. Each beams will be built on sliding formwork. The design of supporting structure is made according to limit states, including addressing timing analysis. Calculation of the effects of loading is made by software and reviews are calculated by hand according to Eurocode.
|
guest ::
RSS feed.