|
|
Family house with a design office in Planá
Školník, Miroslav ; Jurka, Jiří (referee) ; Sukopová, Dáša (advisor)
This thesis describes the design of a family house with a design office in Planá. The house is designed as a brick building from Ytong, the underlying structure of concrete. The main part of the building used for housing has two floors, side part for the design office is one floor. Both parts are covered by a shed roof. The house is designed for four-to five-member family. Garage is embedded in the main building.
|
|
|
Apartment building, Brandýs nad Labem-Stará Boleslav
Králík, Martin ; Osička, Jan (referee) ; Sukopová, Dáša (advisor)
The subject of the bachelor thesis is the documentation for the construction of a residential building in Brandýs nad Labem - Stará Boleslav. The apartment building will be located in a quiet zone of a two-storey building in a future residential development. Residential building is detached. It will be based on flat terrain. The apartment building is L-shaped (it consists of two rectangles). The building has 5 floors and 1 underground floor. There are a total of 19 apartments in the building, technical facilities and storage facilities are located in the underground part of the building. Residential building is basement. The building is covered with a flat vegetation roof. The peripheral above-ground structure is made of therm-shaped blocks, insulated with ETICS contact thermal insulation system. The main entrance to the building is from the northeast side of the building.
|
|
|
Apartment building
Kryštofová, Iveta ; Žajdlík, Tomáš (referee) ; Sukopová, Dáša (advisor)
The subject of this bachelor´s thesis is a process of documentation of implementation of building an apartment house in Brno – cadastre unit Maloměřice. The thesis mainly concerns a detached building with partial basement. This is three-storey building with basement. In my proposal, the object consists of seven dwelling unit total, from which one flat was designed for accessible usage. Structural system of the building was solved by using clay blocks, whereas the basement external walls were created by permanent formwork blocks. The floor structure was made from cast-in-place reinforced slabs. The object is roofed with a warm flat roof.
|
|
|
Multifunctional Building
Ptáček, Lukáš ; Charamza, Josef (referee) ; Sukopová, Dáša (advisor)
The subject of this master’s thesis is elaboration of project documentation for a multi-functional building according to the actual standards and norms given by law. The object has four floor above the ground and one floor partly below ground level with nine flats and two commercial premises. Residential part and commercial premises are separated from each other operationally independent and accessible main entrances. The basisc are made from contrete strips. The house is made by a brick technology of a ceramic blocks. The external walls are insulated with certified contact thermal insulation system. The building is roofed with warm flat roof.
|
|
|
Multifunctional building Pod Spravedlností
Ferdan, Martin ; Sukop, Lukáš (referee) ; Sukopová, Dáša (advisor)
The subject of the diploma thesis is the processing of project documentation for new construction of a multifunctional building. The new building is located in the cadastral area the city of Moravské Budějovice. The use of the object consists of two parts object. And a part that is used for administrative purposes and a part that is used for housing part. The administrative part is located in the left part of the building, the residential part in the right part. The building is designed as a three- and four-story building, which is partially basement. The building is covered with flat roofs. The object is based on foundation belts made of plain concrete. Vertical supporting structures above ground floors are designed from ceramic blocks. Ceiling construction and stairs designed reinforced concrete.
|
|
|
Multifunctional family house
Vdoleček, Jaroslav ; Stodůlka, Jindřich (referee) ; Sukopová, Dáša (advisor)
The goal of this bachelor project is to design a multifunctional family house with a service of a lawyer´s office. The house is designed as a brick house made of clay blocks Porotherm profi. Horizontal bearing structures are made up of reinforced concrete slabs. Footings are designed as unreinforced. The building has a rugged floor plan with 2nd floor in a residential part. The whole object is completed by a flat roof with parapet. A garage with parking place for two cars states cars and small garden equipment is also part of family housing. Law firm Lawyer´s office has its own independent entrance next to the entrance to the house.
|
|
|
Residential Building
Voráč, Roman ; Sedmidubský, Jaroslav (referee) ; Sukopová, Dáša (advisor)
The apartment house is designed as a full-basement structure, with one underground storey and two above-ground storeys. The access to the building is either by a steel staircase or barrier-free, by a steel ramp. Cars enter the basement by a one-way ramp. The main entrance to the building is located on the first above-ground storey and is connected to the stairwell which serves as the principal vertical communication. The basement floor houses a parking lot, supporting facilities, cellars, and a boiler room. The first floor houses offices, including supporting facilities, and two apartment units, one comprising two rooms with kitchenette, the other a 3+1 (two-bedroom) unit. In addition, there is also a pram room. There are two 3+1 (two-bedroom) units on the second floor. Each apartment has its own balcony. The facade of the building is segmented, serving as a contact thermal insulation system. The building has a saddle roof, covered with gray-coloured seamed metal sheet roofing. Its slope is 13°. The building lies on ribbon foundations and a bearing plate. The structural system is based on brickwork consisting of ceramic building blocks, supplemented by reinforced concrete on the basement floor, and makes use of an outside contact thermal insulation system. The roof structures are represented by reinforced concrete monolithic ceilings. The load-bearing structure of the roof consists of a nailed roof truss girder, with the bottom flange of the girder carrying an SDK soffit – the ceiling structure of the second floor. The building will have a central heating system comprising an electric boiler with an accumulation tank located in the boiler room on the basement floor. Horizontal utility lines are bundled, with two main utility nodes located between apartment units.
|
|
|
Apartment building
Slepánek, Mojmír ; Woytela, Jindřich (referee) ; Sukopová, Dáša (advisor)
IN MY BACHELOR THESIS I DEAL WITH THE CONSTRUCTION OF THE NEW APARTMENT BUILDING IN BOSKOVICE, STREET LIPOVÁ ON PLOT 4415/146. THE TOTAL AREA OF THE PLOT IS 1097 M2. THE APARTMENT BUILDING HAS 3 FLOORS AND A BASEMENT. VERTICAL CONSTRUCTIONS IN THE BASEMENT ARE DESIGNED FROM THE CONCRETE BLOCKS AND FOR THE OVERGOUND FLOORS THE POROTHERM SYSTEM. THE VERTICAL PERIPHERAL STRUCTURES ARE PROVIDED WITH AN ETICS THERMAL INSULATION SYSTEM. HORIZONTAL BEARING STRUCTURES ARE DESIGNED AS MONOLITHIC REINFORCED CONCRETE SLABS. THE ROOF IS MADE FROM TRUSS GIRDER AND A WARM FLAT ROOF. THERE ARE SIX DWELLING UNITS IN THE APARTMENT BUILDING. STORAGE ROOMS, UTILITY ROOM AND GARAGE ARE DESIGNED IN THE BASEMENT. THE DRAWING PART OF MY THESIS WAS PROCESSED IN A COMPUTER PROGRAM AUTOCAD.
|
|
|
Family house with hairdressing
Slezáková, Denisa ; Spáčilová, Jitka (referee) ; Sukopová, Dáša (advisor)
The aim of the thesis submitted is to project house with hairdressing operation. The house has two above-the-ground and one underground floor. It is equipped with garage for two cars which is situated in the basement. The hairdressing operation is accessible via separate entrance. The foundations of the building are made of stepped reinforced concrete. Porotherm Profi blocks are used for vertical structures. Horizontal structures are also projected using Porotherm system – ceiling girders Pot and ceramic inserts are used. The roof is flat, with attic.
|
|
|
Apartment building in Polní
Ferdan, Martin ; Woytela, Jindřich (referee) ; Sukopová, Dáša (advisor)
This thesis covers designing documentary materials for realization of a new- build property of a residential house. The residential house is planned on a flat land. It is a five-floor building with a cellar. The constructional system is brick of construction blocks HELUZ. The building is based on foundation strips from pure concrete. Vertical supporting constructions are from blocks HELUZ. Perimeter walls are thermally insulated by contact thermal insulation. Horizontal supporting constructions are from monolitic reinforced ferroconcrete. The roofs are solved as flat single housing cover. In the residential house there are 14 housing units, non-residential premises and a technical hall. The total built-up area is 651,55 m2, The attic height is +12,300. The building has got a barrier-free entrance, but there is no barrier-free flat here. There is a car park next to the residential house. There are a technical hall, a clubroom, a washroom, a pram room, a bicycle room, a storeroom and cellar booths for individual housing units. From the first floor up, there are individual housing units. In the last floor there are placed 4 maisonette flats which have an access to the outdoor terrace – a vegetative flat roof. Flats have an access from one central staircase area orientated towards south-east. In this area, there is also planned a lift.
|
guest ::
