|
|
Heavy metal contamination of selected Brno city localities
Šebková, Michaela ; Sommer, Lumír (referee) ; Dočekalová, Hana (advisor)
The aim of this work is to study the soil and plant contamination by heavy metals (lead, cadmium and mercury) in five selected places of Brno city. The sampling place Opuštěná represents the heavily polluted locality with high traffic density situated in the city centre. Sampling places Vídeňská and Podstránská belong to medium polluted localities, that are situated close to frequented roads. Relatively clean localities are represented by Musorgského and Šrámkova places, which are situated in peripheral city district with smaller traffic density. Soil and plants were sampled at two time periods (November 2008 and January 2009). Average amounts of mercury, cadmium and lead in collected soil samples are lower then limits of the Directive number 13/1994 of the Code of Ministry of the Environment. The content of heavy metals in soils corresponds to the sampling place. The highest value of metals content was found in the soil sampled at Opuštěná site. The content of lead and mercury in leaves of common dandelion was higher than the content in roots. In the case of cadmium the situation was opposite, the highest content was measured in underground part of the plant. It was found, that the content of heavy metals in leafy and underground part showed only small difference between sampling places. Nevertheless, the locality Opuštěná is found again as the highest contaminated place. Values of pH of collected soil samples were ranged in neutral area between 7 and 7,5.
|
|
|
Determination of phosphates in waters and characterization of their negtive effects on water ecosystem
Novotný, Radek ; Komendová, Renata (referee) ; Sommer, Lumír (advisor)
This bachelor thesis is focused on the negative effects of phosphates in natural waters and their methods of determination. The first part is characterized by a negative impact on natural water and there are characterized the problems associated with eutrophication, development of cyanobacteria and algae and the resulting potential health risks. The second section describes the methods by which phosphates can be determined. The work highlights the particular spectrophotometric methods such as molybdophosphoric acid, vanadomolybdophosphoric acid, wolframophosphoric acid, phosphomolybdenum blue and methods with some basic dyes such as rhodamine B, rhodamine 6G, malachite green and crystal violet. There are also mentioned methods, which are used less frequently, but they are relatively sensitive, such as AAS, AES, LC-ICP-MS and next such as chromatographic, electrochemical and enzymatic methods. Finally, work mentions the possibility of using automatic techniques such as FIA or CFA, which are suitable for routine and frequent determination, often using the spectrophotometric methods, but not only these.
|
|
|
Fluorimetric Determination of Scandium
Holubová, Zuzana ; Komendová, Renata (referee) ; Sommer, Lumír (advisor)
The submitted thesis deals within the sensitive fluorimetric determination of scandium with a new reagent 8-Hydroxyquinoline-5-sulphonic acid. All important factors such as time, pH, reagent concentration, buffers, surfactants and selected interferents have been studied with respect to the selectivity, sensitivity, precision and detection limit on the determination by using classic fluorescence spectra and their first derivation. This reagent was also used for the determination of scandium in real waters. The new reagent was shortly compared to morin and lumogallion when used for scandium.
|
|
|
Arsenic and arsenic species cycle in environment
Ševčíková, Kateřina ; Sommer, Lumír (referee) ; Dočekalová, Hana (advisor)
This bachelor thesis, based mostly on literature retrieval, deals with monitoring of individual arsenic compounds in the environment and is also reviewing methods used for their analysis. The experimental part is focused on determination of various arsenic in the Oncorhynchus mykiss tissue by HPLC-UV-HG-AFS. Obtained results showed that the arsenic was present in the tissue of the Oncorhynchus mykiss in form of arsenobetaine, which is common for fishes and other aquatic animals and is not toxic even for consuments.
|
|
|
Multicomponental Preconcentration of As, Sb, Se and Te on Modified Silica, Their Determination by ICP-AES (ICP-MS) and Application for Waters
Urbánková, Kristýna ; Řehůřková, Irena (referee) ; Kanický, Viktor (referee) ; Ventura, Karel (referee) ; Sommer, Lumír (advisor)
The determination of inorganic speciations of arsenic, antimony, selenium and tellurium in natural waters demands often separation and preconcentration. Solid phase extraction is a very effective method for these purposes. In this paper the separation and preconcentration of these microelements is realised on the basis of modified silica Separon SGX C18, SGX C8, SGX CN, SGX NH2, SGX Phenyl and strongly basic anion Exchanger SGX AX. The sorption was provided in the presence of cationic surfactants such as benzyldimethyl dodecylammonium bromide (Ajatin), benzyldimethyltetradecylammonium chloride (Zephyramine), 1-ethoxycarbonylpentadecyltrimetrhylammonium bromide (Septonex) and selected complexing agents 4-(2-pyridylazo)resorcinol (PAR), 8-hydroxyquinoline-5-sulphonic acide (8-HQS), 1,2-dihydroxybenzene (PYR), amonium 1-pyrrolidinecarbodithioate (APDC), sodium diethyldithiocarbamate (DTC) or thiourea(Thur). The interactions of the formed ion associate with the sorbent shows a complicated character which has not been cleared as yet. The previous conditioning of the sorbent plays an outstanding role. Thus, the sorption efficiency was studied in the presence and absence of surfactant and of selected organic complexing agents. Moreover, the influence of pH of the sorbed solution as well as the speed and the volume of the solution running through the sorbent and the type and volume of the eluent on the resulting sorption efficiency was evaluated. The sorption was successfully carried out from 50-1000 ml of solution which allows the 100 fold increase of the preconcentration factor and the determination of the microelements in g.l-1 instead of mg.l-1 by using the common ICP-AES. The influence of macroelements occurring in waters as well as B, Be, Bi, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sr, Ti, V and Zn in comparable concentrations involve less than 5% error. After the quantitative elution of microelements, the organic solvents were evaporated under IR lamps prior to the determination by ICP-AES and |ICP-MS. The conditions for the direct determination of arsenic, antimony, selenium and tellurium in g.l-1 with ICP-MS were also described in detail in the absence and presence of internal standards Ge and Bi. However, even in this case the preconcentration on silica in the presence of surfactant and selected organic complexants was also tested. When the sorption was followed from 500 ml a 50 fold enrichment factor is reached and the sensitivity for the microelements is improved. The direct determination and the sorption of microelements were applied on synthetic and real waters (dirinking, surface, mineral and sea waters). Instrumental and practical detection limits for various water samples were evaluated according to IUPAC. The results from 1000 ml solution of real waters after sorption on modified silica and the final determination of microelements with ICP-AES were compared with those from ICP-MS without sorption using the method of standards addition in the presence of suitable internal standards. By comparison of results for synthetic and real water samples the error of the determination of microelements was evaluated.
|
|
|
The circulation of cobalt in the environment
Charuza, Martin ; Mládková, Zuzana (referee) ; Sommer, Lumír (advisor)
This bachelor thesis deals with importance of cobalt in the environment, especially as a component of B12 vitamin. Vitamin B12 is a complex, that is necessary for proper formation of blood corpuscules and DNA, except that affects many others procesess in the body. Cobalt forms many complex compounds, which are discussed in this work. The most common oxidation number in compounds are +II and +III. The second part describes spectrophotometric determination of cobalt with suitable reagents. There are a lot of spectrophotmetric reagents for cobalt determination in a sample. The most widely used spectrophotometric reagents for determination of cobalt are 4-(2-pyridylazo)resorcinol (PAR), 1-(2-pyridylazo)-2-naphtol (PAN), 2-(5-Brom-2-pyridylazo)-5-diethylaminophenol (5-Brom-PADAP), 4-(2-thiazolylazo)resorcinol (TAR) a 2-(2-thiazolylazo)-4-methoxyphenol (TAMP). All of theese reagents are heterocyclic azodyes. Cobalt is bonded on this azodyes by coordination covalent bond and forms stable complex.
|
|
|
Chromium and chromium species cycle in environment
Nevrlá, Jana ; Sommer, Lumír (referee) ; Dočekalová, Hana (advisor)
This work focuses in the first theoretical part mainly on the possibility of entering various forms of chromium into the environment, their accumulation and transformation in environmental compartments. There are also described methods of sampling for analytical determination of chromium, the type of treatment of these samples and the most analytical methodologies for the determination of chromium in the oxidation stage III and VI. The experimental part is focused on the quantitative determination of Cr(III) and Cr(VI) in waste water, taken from the neutralizatoin station of the Chemical faculty of Brno University of Technology, by using selected spectrophotometric methods and the obtained results are compared with the results of analytical determination of total chromium by atomic absorption spectrometry.
|
|
| |
|
|
The issue of determination of tin in environmental matrices
Bušinová, Markéta ; Sommer, Lumír (referee) ; Doležalová Weissmannová, Helena (advisor)
This diploma thesis deals with the retrieval of the content of tin in environmental media, the circulation in them and possibilities of the determination of tin in the environment. Summarizes available information on the properties of tin and its compounds, the occurrence and circulation of tin in environmental and determination of tin in environmental media, attention is paid to the determination of total tin content using method of ET-AAS. The experimental part is focused on optimization methods of determination for the ET AAS and selection of a suitable extraction procedure for determination of total tin content in soils and sediments. The best procedure for the determination of tin in the ET-AAS was applied to samples of soil, sediment and water. As the optimum matrix modifier was chosen the solution of Pd (NO3)2 in 5% ascorbic acid, the optimum pyrolysis temperature was 1400 °C and atomization temperature 2400 ° C. Neither of extraction procedures examined were found to be an appropriate procedure for the determination of tin in environmental samples and further work is necessary to optimize the method of separation.
|
|
| |
guest ::
