National Repository of Grey Literature 11 records found  1 - 10next  jump to record: Search took 0.00 seconds. 
Methodic of vertical deflections determination of bridge construction by the radar interferometric technology
Antoš, Filip ; Talich, Milan ; Glöckner, M. ; Böhm, Ondřej ; Soukup, Lubomír ; Havrlant, Jan ; Závrská, M. ; Šolc, Jakub
The methodology provides guidance for determining the vertical deflection of bridge structures using radar interferometry technology. The vertical deflection of bridges are primarily caused by stress during transit of vehicles. The deflections are simultaneously measured by radar throughout the length of the monitored structure. The measurement is continuous with a high sampling frequency (200 Hz) and with high precision (0.01 mm). It is believed the use of interferometric radar IBIS-S Italian manufacturer IDS. General recommendations and conclusions are valid for every kind of radar.
Methodics of horizontal movements determination of height objetcs by the radar interferometric technology
Antoš, Filip ; Talich, Milan ; Glöckner, M. ; Böhm, O. ; Soukup, Lubomír ; Havrlant, Jan ; Závrská, M. ; Šolc, Jakub
The Methodics provides a user with an instruction for horizontal movements determination of height objetcs by the radar interferometric technology. The horizontal movements of height objetcs are roused by the weather conditions or by the object fundament instability or by influence of intrinsic forces caused by a mechanic component attached to the object. The movements of the height objetcs are measured simultaneously in the whole length of the monitored object. The measurement is continuous with high frequency (up to 200 Hz) and very precise (up to 0,01 mm). It is possible to measure remotely, without need of accesss to the object, when natural reflectors of radar signal are parts of the object's surface. If the body of the object, resp. attached metal parts have poor reflection, metal corner reflectors have to be attached to suitable places on the object. Interferometric radar IBIS-S of Italian production is supposed to be used. Nevertheless, the general recomendations and conclusions are valid for any other radar device of this kind.
Possibilities of precise determining of deformation and vertical deflection of structures using ground radar interferometry
Talich, Milan
The contactless determination of deformations and deflections of structures with accuracy up to 0.01 mm in real time can also be used in practice the technology of ground based radar interferometry. It is also possible in real time to capture oscillations of the object with a frequency up to 100 Hz. Deformations can be determine simultaneously in multiple places of the object, for example a bridge structure at points distributed on the bridge deck at intervals of one or more meters. This allows to obtain both overall and detailed information about the behavior of the structure during the dynamic loading. In addition to the necessary principles are given practical examples.
Determining of the deformation of the concrete dam Orlik using ground InSAR
Talich, Milan ; Glöckner, M. ; Böhm, Ondřej ; Antoš, Filip
GB InSAR technique plays an increasingly important role in determining the deformation of dams. The paper describes the use of GB InSAR technique for monitoring deformations of the Czech largest concrete dam Orlík on the Vltava river. After analyzing one month-long continuous measurement of the dam were detected non-linear movements. The relation between acting water level and resulting deformations were investigated in detail. The results confirm that GB InSAR technique is very suitable for monitoring deformations of this type of constructions. At the same time, the results may serve as a valuable source of data and information for further analysis in area of stability and for early warning systems.
Precise monitoring vertical deflection of bridge structures using method of ground radar interferometry
Talich, Milan
The contactless determination of vertical deformations of bridge structures with accuracy up to 0.01 mm in real time can also be used in practice the technology of ground based radar interferometry. It is also possible in real time to capture oscillations of the object with a frequency up to 50 Hz. Deformations can be determine simultaneously in multiple places of the object, for example a bridge structure at points distributed on the bridge deck at intervals of one or more meters. This allows to obtain both overall and detailed information about the behavior of the structure during the dynamic load and monitoring the impact of movements either individual vehicles or groups. In addition to the necessary theory are given practical examples.
The Application of the Ground-based InSAR technique for the deformation monitoring of concrete hydropower dam Orlík on Vltava river
Talich, Milan ; Glöckner, M. ; Böhm, Ondřej ; Antoš, Filip ; Soukup, Lubomír ; Havrlant, Jan ; Šolc, Jakub
GB InSAR technique plays an increasingly important role in determining the deformation of dams. The paper describes the use of GB InSAR technique for monitoring deformations of the Czech largest concrete dam Orlík on the Vltava river. After analyzing one month-long continuous measurement of the dam were detected non-linear movements. The relation between acting water level and resulting deformations were investigated in detail. The results confirm that GB InSAR technique is very suitable for monitoring deformations of this type of constructions. At the same time, the results may serve as a valuable source of data and information for further analysis in area of stability and for early warning systems.

National Repository of Grey Literature : 11 records found   1 - 10next  jump to record:
See also: similar author names
1 Talich, M.
Interested in being notified about new results for this query?
Subscribe to the RSS feed.