|
|
House and winery in Zaječí
Tomková, Denisa ; Polášek, Josef (referee) ; Müller, Jan (advisor)
The bachelor's thesis deals with the proposal of a new house intended for permanent living of a family of four and at the same time for the production and storage of wine. The building is located in a sloping terrain in the cadastral area of the village Zaječí and consists of a basement and one above-ground floor. It includes a vaulted cellar for archiving wine, an outdoor terrace and a covered parking space. The proposal of the house is adapted so that the well-being of family members is not disturbed by the planned wine production. This is achieved by the fact that the basement floor is intended for the operation of the winery, and on the contrary, the quiet and social zone, which is the zone intended for living, is designed on the above-ground floor. The main load-bearing system of the basement are concrete blocks made of lost formwork and ceramic bricks from the Heluz system on the 1st floor. The perimeter masonry is insulated with the ETICS contact thermal insulation system. The living room has a wooden, beamed ceiling and in the rest of the building is designed a reinforced concrete ceiling slab. The roof is flat, in 2 height levels and with a slope of 3%. The design of the house includes an internal recuperation unit, underfloor heating and an external three-layer stainless steel Schiedel chimney system. The work is processed in the form of project documentation adapted for the construction with almost zero energy consumption.
|
|
|
Detached house on a slope
Tměj, Václav ; Hnízdilová, Aneta Aya (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor thesis is design documentation for construction of family house. House is designed for family of four members. The house is setted in a slopping terrain. The building has ground floor and basement. The building is based on foundation strips made out of concrete. Vertical circumferential and supporting constructions are designed according to Porotherm system and are equipped by contact thermal insulation system. Horizontal load-bearing structures are made of reinforced concrete. Roof construction of the object is composed by flat roofs and shaped roof. Drawings were worked out in software Archicad.
|
|
|
Detached house with an establishment
Šestáková, Tereza ; Hnízdilová, Aneta Aya (referee) ; Utíkalová, Ivana (advisor)
The aim of this bachelor thesis is a design of new building detached house with establishment – workshop in village Rázová, district Bruntál. It is about self-standing, two-floor partial basement object in which is situated one residential unit. Establishment will be used as joinery assembly workshop. Floor plan of this object is irregular. Detached house has saddle roof, workshop and garage, which has flat roof. Object is based on plain concrete stip foundations. The vertical load-bearing structures are designed of protobeton blocks Porfix and blocks from lost formwork. The ceiling structure is designed as reinforced concrete slab. Saddle roof is gable construction.
|
|
|
Detached house, Horní Lhota
Šenovský, Jan ; Vystrčil, Jan (referee) ; Kacálek, Petr (advisor)
The aim of the bachelor´s thesis is to develop the design documentation for the construction of the detached house with an establishment which is a design office. It is single-family home which is half-buried into the sloping terrain. The building has partial basement, one ground floor and attic rooms. Functionally it is divided into two parts, which are detached house for five-member family and design office for four colleagues, the design office is single-storey. Both parts are connected. The structure of the building is proposed as traditional masonry building, the external walls in the basement are from concrete blocks of permanent formwork. The internal walls in the basement and also the walls on the ground floor and in attic rooms are from brick blocks. The floor-structures are proposed as half-prefabricated rib-and-filler system Miako with concrete grout. The roof structure of the detached house is designed as traditional timber roof truss with middle purlins, which are supported by walls in attic rooms. There is proposed insulation over rafters with exposed rafters in the interior. The roof structure of the design office is warm flat roof with a 3% slope, the roof drainage is provided by rain gutter, which is situated in the north-west side, where is no parapet wall. The facade of the building will be made as ventilated, external wall finish is combination of concrete and timber cladding.
|
|
|
Detached house with a car workshop
Svoboda, Petr ; Osička, Jan (referee) ; Brzoň, Roman (advisor)
This bachelor thesis deals with design of detached house with car workshop in Zhoř u Mladé Vožice. It consits of two detached buildings without cellar on a plain ground. The house is L-shaped with one ground floor and attic. This building is made as a one unit made for four family members with option of accomodation of guests. The house is designed as a single layer clay masonry without thermal insulation with a pitched purlin roof. The building of the car workshop has got only one ground floor and it has a rectangular shape. In the front section there is the car workshop and the back section is a base for workers. The building is designed from clay masonry with a additional thermal insulation. The roof is made from truss girders.
|
|
|
Family House Červený kopec
Salagová, Lucia ; Tichomirov,, Vladimír (referee) ; Novotný, Miloslav (advisor)
The subject of this Bachelor Thesis is the execution-stage construction project design of a house with a business establishment. The building is to be situated in a sloping piece of land of Kejbaly Street within the cadastral area of Brno City. The lowest floor is embedded into the slope in order to ensure good linkage to the terrain. The building has two more floors, both above ground. The part of the establishment facility is intended to be used as a projection office of the investor. The building is grounded on strips of reinforced concrete, with wall bearing structural system. The underground floor is made of absorptive formwork; the aboveground floors are made of ceramic bricks. The ceiling structures are of reinforced concrete. The object is covered with a flat single-ply roof, part of which is designed as a green roof.
|
|
|
Detached house with a workshop
Rachota, Václav ; Vystrčil, Jan (referee) ; Jelínek, Petr (advisor)
Abstract The aim of the bachelor's thesis is solution of construction of „Detached house with workshop“ in the form of project documentation. It´s new detached house located on the outskirts of the village Dubňany on flat ground with possibility of connection to all engineering networks with total area of 1531,75 square meters. The house is without a basement and it consists of two storeys and flat roof. The use of the workshop is designed as a tailor´s shop with a sewing workshop. The unity of the facade is broken by the use of three different materials and large-format windows that allow connection with the surrounding landscape. A significant element is the stone cladding and overhanging structures, distinguished from the surrounding facade by a gray trowel imitating exposed concrete. Perimeter masonry is designed from HELUZ ceramic blocks, which are also used for internal load-bearing structures. The layout is divided by plasterboard partitions. The ceilings are chosen as monolithic reinforced concrete and are covered with plasterboard ceilings. The interior staircase is designed as a monolithic reinforced concrete. The building stands on foundation strips made of plain concrete.
|
|
|
Detached house with business premises
Pokorný, David ; Juráň, Vladimír (referee) ; Brukner, Bohuslav (advisor)
The subject of the bachelor thesis is the processing of project documentation for the construction of a family house with an establishment. This building is designed in a slightly sloping terrain on the edge part of the village Holasice, part of Brno-countryside. The family house has a partial basement and two floors. Establishment is designed as a single-storey building with own access from the road and will be used for design activities. The building is based on plain concrete strip. Vertical structures are designed from ceramic blocks. Vertical stuctures of the basement will be also protected by a layer of permanent blocks. The roof of the family house is designed as a gable, above the garage is a flat roof with a vegetation area. Ceiling structures are made of monolithic, reinforced concrete.
|
|
|
Family house with a workshop
Plášková, Věra ; Vorlíčková, Petra (referee) ; Donaťáková, Dagmar (advisor)
The subject of this bachelor's thesis is a newly-built family house with a workshop. The level of documentation is determined for the construction. The building is located in the town of Uherský Brod, northwest of the center. The house is designed as a detached two-storey building for a family of four also including a workshop – office. Access to the house is from the north side and the living rooms are situated on the southwest side, towards the garden. The house is designed from the Porotherm construction system. The vertical load-bearing masonry is made of Porotherm 30 Profi ceramic blocks, the horizontal structures are made of reinforced concrete. The roofs are designed as warm flat roofs.
|
|
|
Detached house
Pavíčková, Kristina ; Skřek, Daniel (referee) ; Petříček, Tomáš (advisor)
The aim of this bachelor’s thesis is design documentation of a detached house with horse stables. Both buildings are situated in Moravský Krumlov. The detached house is designed as a wooden house with a partial basement and two ground floors. Enterance to the house is oriented to the north. Behind the house is standing horse stable with one ground floor and pen. The structural system of the building is based on the Porotherm system.
|
guest ::
