Národní úložiště šedé literatury Nalezeno 81 záznamů.  začátekpředchozí21 - 30dalšíkonec  přejít na záznam: Hledání trvalo 0.01 vteřin. 
Polarization in optical fiber
Bilek, Maroš ; Dejdar, Petr (oponent) ; Münster, Petr (vedoucí práce)
In the theoretical part of the the bachelor's thesis, the first part is devoted to the analysis of the spread of the light beam in the fiber, the parameters of light and various types of fibers. Subsequently, the phenomenon of polarization, its conditions, methods of depiction and writing are described in detail. Furthermore, the issue of polarization mode dispersion (PMD) is explained. Bindings, differential group delay and PMD measurement methods are described. The practical section of the thesis describes the methods and procedures for measuring polarization and polarization mode dispersion. The EXFO FTB-200 measuring platform was used to measure PMD and was equipped with a module for PMD/CD measurement. A polarimeter in combination with a polarization analyzer was used to measure polarization. As part of the long-term measurements, the EXFO FTB-200 measuring instrument was reused in the case of PMD. In the case of polarization measurements, a combination of polarimeter and balance detector was used. Finally, the results of both short- and long-term measurements are displayed. The results of short-term polarization measurements are shown in the form of both, a Poincaré sphere and a polarizing ellipse with a calculated azimuth and ellipticity. Long-term measurements are in the form of graphs that show changes in polarization rotation rate over time. From the displayed results, the dependency of polarization and therefore PMD on the environmental surroundings is concluded.
Car computer based on Raspberry Pi
Matula, Vladimír ; Dejdar, Petr (oponent) ; Münster, Petr (vedoucí práce)
The main goal of this diploma thesis is to investigate the smart cars field together with the technologies linked closely to it. Further, the thesis offers an overview of options to extend the vehicle capabilities with the car computer created with the Raspberry Pi Zero W. The thesis provides hands-on experience and is stuctured into two parts. The first, theoretical section focuses on Internet of Things and Machine to Machine communication. It also describes the currently available smart car solutions on the market, their pros and cons. The practical part of this thesis describes design and creation of a smart computer based on Raspberry Pi Zero W with draft of self-made security system from vehicle containing a motion sensor and a camera. It also includes a development and integration steps with a mobile application capable of viewing the static information regarding the car state, such as Rotations per minute. Vehicle speed, etc. The created system also has the capability of informing the user about it's current location on request.
Návrh nových laboratorních úloh pro výuku principů měření optických vláknových sítí
Havlíček, Filip ; Dejdar, Petr (oponent) ; Münster, Petr (vedoucí práce)
Cílem bakalářské práce je návrh dvou laboratorních úloh pro měření parametrů optických sítí. Práce se v teoretické části věnuje základům optiky, optickým vláknům, optickým konektorům a standardům podle ITU-T. Dále jsou v práci rozebrány jednotlivé parametry optických vláken a metody pro jejich měření. V praktické části jsou návrhy dvou laboratorních úloh pro měření útlumu, chromatické disperze a polarizační vidové disperze.
Optical fiber as a distributed temperature sensor
Vošček, Jakub ; Dejdar, Petr (oponent) ; Münster, Petr (vedoucí práce)
The financial requirements between fiber optic sensors and conventional sensors are gradually declining, which, despite many advatages and wide range of applicationas, has slowed down the demand for these sensors. With the demand for fiber optic sensors also grow the requirements for the parameters of these sensors. This thesis deals with distributed temperature fiber optic sensors. Non--linear phenomen in optical fibers, such as Raman scattering is used for measuring with these sensors. This scatterin was used to obtain information about temperature, which effected the optical cable under the test.
Komunikace mezi řídicími jednotkami v automobilovém průmyslu
Jurek, Martin ; Tomašov, Adrián (oponent) ; Dejdar, Petr (vedoucí práce)
Tématem této bakalářské práce je komunikace mezi řídicími jednotkami dveřních systémů v hromadné dopravě. Nejprve jsou popsány předpisy, které musí komunikační systém splňovat, aby mohl být nasazen v prostředcích hromadné dopravy. Dále jsou navrženy systémy pro komunikaci po optickém vlákně, metalickém vedení a bezdrátově za využití Bluetooth Low Energy. Použité technologie jsou teoreticky popsány a navržené systémy realizovány s využitím vývojové desky Lolin 32 ESP-WROOM-32 a Arduino Uno. Systémy jsou navrženy tak, aby snímaly vstupy od řidiče či cestujících, které jsou následně zobrazeny na displeji. Vytvořené přenosové systémy jsou v práci blíže popsány.
Laboratorní úloha – analyzátor optických tras OTDR
Šimková, Barbora ; Münster, Petr (oponent) ; Dejdar, Petr (vedoucí práce)
Bakalářská práce obsahuje detailní rozbor problematiky OTDR a realizaci zapojení. Součástí práce je také teoretický rozbor optických vláken a jejich přenosových vlastností, zejména rozptylu a odrazu. Realizace zapojení byla provedena pomocí platformy Red Pitaya a připojené desky Koheron s laserem. Výsledný program byl vytvořen ve vývojovém prostředí LabView. Součástí programu je i uživatelské rozhraní pro snadné ovládání.
Implementation of SCADA architecture into fiber optic seNSING systems
Šišolák, Filip ; Tomašov, Adrián (oponent) ; Dejdar, Petr (vedoucí práce)
The bachelor thesis deals with the issue of data control and acquisition using SCADA technology and the subsequent implementation of two-way communication. The theoretical examination also includes an analysis of the current state of use of SCADA in optical sensing systems. In view of the shortcomings of the available SCADA systems, our own software programmed in the LabVIEW development environment is implemented. The Modbus TCP protocol is used for communication with the myRIO platform. Part of the work is also the analysis of the maximum achievable throughput with the Modbus TCP protocol.
Aplikace optických vláknových senzorů
Ráboňová, Jana ; Dejdar, Petr (oponent) ; Münster, Petr (vedoucí práce)
Diplomová práce se zabývá měřením teploty půdy. V teoretické části byly vysvětlenyoptické vláknové systémy se zaměřením na DSTS systémy a jejich uplatnění. V praktickéčásti byl vytvořen funkční systém k měření teploty půdy za pomocí platformy Arduino vhloubkách 0,1-1 m. Dále bylo provedeno měření teploty na testovacím polygonu pomocíoptického vlákna přístrojem fTB 2505 v laboratoři.
Laboratory task for measuring parameters of optical fibre gratings
Dúbravka, Adrián ; Dejdar, Petr (oponent) ; Ružička, Michal (vedoucí práce)
The bachelor’s thesis deals with optical fibers, especially fiber gratings such as Bragg’s grating. The theoretical part describes different types of fiber grids and their main differences. Later on the theoretical part deals with different methods of manufacturing Bragg’s gratings, temperature compensation in grantings and their use as a sensor. The practical part deals with the influence of pressure and temperature on gratings and sliding FBG sensor. OSNR and spectral lattice widths are also measured. Furthemore, the influence of various types of strain on optical fibers in Bragg’s gratings is also studied.
Vytvoření Bluetooth dataloggeru pro záznam a zpracování naměřených dat
Vaverka, Jan ; Myška, Vojtěch (oponent) ; Dejdar, Petr (vedoucí práce)
První část této práce se věnuje dataloggerům a jejich využití v dnešním světě. Ve druhé částí se práce zabývá mikrokontroléry, které se využívají jako řídící jednotky pro dataloggery. Byly popsány jednotlivé periferní zařízení MCU a rovněž jejich komunikační rozhraní. Další část je věnovaná Bluetooth Low Energy, které se využívá k přenosu naměřených dat k uživateli. Na základě získaných znalostí byl proveden výběr mikrokontroléru a senzorů. Z vybraných komponentů byl sestrojen a naprogramován datalogger, který bude měřit vlastnosti kvasu během kvašení ovoce. Na závěr byla vytvořená mobilní aplikace pro stahování dat z dataloggeru a následné zobrazení dat v grafech.

Národní úložiště šedé literatury : Nalezeno 81 záznamů.   začátekpředchozí21 - 30dalšíkonec  přejít na záznam:
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.