|
|
Tracked vehicle for transport of the pallets
Blažek, Martin ; Škopán, Miroslav (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis deals with the design of a remotely controlled tracked vehicle for the transport of pallets on unstable ground. The aim of the work is to make a short research of similar tracked transport machines and to design concept including choice of vehicle drive, design of pallet lifting equipment and strength calculations of sub-parts.
|
|
|
Custom design for lifting equipment
Matějíčková, Eva ; Chladil, Josef (referee) ; Kalivoda, Milan (advisor)
The aim of this thesis is to design and manufacture a lifting device to the Volkswagen Crafter long vehicle. In the first part, I present a simple descriptive overview of different lifting devices based on their principle and use. Next, commercially available alternative solutions to the given problem are shown and discussed. The main goals of the practical part are the design of the lifting device that fits to a carriage van according to given specifications and the description of the technological processes for the manufacturing of individual components of the device. The design includes selection of proper machines, measuring devices and working tools, which was carried out based on the available equipment. Finally, manufacturing, testing and evaluation are described and discussed together with the possibilities for future improvement.
|
|
|
Pillar jib crane
Martinka, Tomáš ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deals with the design of an alternative atypical construction of a column crane including important strength calculations according to specified parameters: arm extension length 4000 mm, lift height 8500 mm, load capacity 2000 kg. Part of this work is also elaboration of technical report with analysis of construction, selection of suitable hoist with important calculations. Further draw a construction drawing of the column crane assembly according to the entered parameters and a detailed drawing of the column.
|
|
|
Handling equipment for a motorcycle
Šoulák, Vojtěch ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis deals with the design of handling equipment for a motorcycle, according to the specified parameters. The search section, containing information about handling devices. Furthermore, the design and calculation of the construction of the lifting mechanism, hydraulic circuit and drive of the whole device are processed in this work. The content of the work is also the drawing documentation of the equipment.
|
|
|
Production technology of a lifting equipment for tractor cooler
Raiskup, Martin ; Fiala, Zdeněk (referee) ; Zemčík, Oskar (advisor)
The thesis focuses on production technology of the lifting equipment for a tractor cooler. This device is used in order to ease the installation of a cooler during the manufacturing of a tractor. In the first chapter, various types of the lifting equipment are described. In the following chapters manufacturing methods, machines and tools for the production of the specific component are described. Furthermore, materials and manufacturing processes for the complementation of the specific component are proposed. In the conclusion, the methods for the manufacturing are suggested, the timescale is calculated and the technical-economical evaluation is performed.
|
|
|
Positioning board for a pallet
Zábojník, Petr ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor's thesis deals with the design of static placement table for lifting loaded EUR palettes. Load capacity of the manipulator should be at least 1500 kg and lift height from the zero position at least 700 mm. Furthermore it should be possible to switch between electrical and hydraulic drive. This thesis consists of two parts, technical report and drawing documentation.
|
|
|
Barrel handling equipment
Dostál, Martin ; Pokorný, Přemysl (referee) ; Hloušek, David (advisor)
The primary content of this work is a conceptual design of a manipulative device for tin barrels, with its characteristic parameters. The model design was completed in accordance with the gathered information from the critical research of comparable devices available on the market. Ultimately, the model concept is focused on improving the market devices’ deficiencies. The manipulative device model was composed in Autodesk Inventor 2018 application and subsequently subdued to testing calculations. The entire model construction is chiefly welded. Therefore, the majority of the calculations is concerned with the solidity control of the welds.
|
|
|
Design of workshop crane with powered chassis
Tmej, Tomáš ; Hadraba, Petr (referee) ; Kočiš, Petr (advisor)
This bachelor’s thesis focuses on design of workshop crane with powered chassis. The work describes available types of cranes and devoted to the category of workshop cranes in detail. Two construction designs of a workshop crane with powered chassis are elaborated. One option is selected. In this selected variant is made a detailed design, control calculations of the supporting parts and the production drawings are drawn at the end.
|
|
|
Preparation for rough superstructure steel buildings in Uničov
Vondřejc, Adam ; Kolečkářová, Barbara (referee) ; Kantová, Radka (advisor)
The main purpose of the bachelor thesis is to describe technological state of rough upper construction of the steel production hall which is part of the location of the company Melites s.r.o, I will design optimal working procedure for the most effective construction regarding the foundations of the construction. I will focus on different variants of the lifting equipment. Furthermore, I will concentrate on fire prevention systems for steel constructions while applying the knowledge on this particular object. In addition, the thesis includes budget, monitoring and test plan and schedule of work in which I will mention also building envelope of the steel hall.
|
|
|
Material Handling Platform
Bábek, Tomáš ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
This bachelor thesis is focused on constructional design of workshop handling platform which is driven by linear hydraulic motor. First the types of gripping of linear hydraulic motor are described. Next part contains drafted solutions of handling platform construction. Important part of thesis is composed of statistical computing of machinery parts and their strenght computations within the frame of designed proportions. Afterwards the bearings are chosen according to thickness of shaft and the hydraulic motor and the diagram of hydraulic circuit are designed. At last controlling computations are done and assembly and weldment drawings are created.
|
guest ::
