National Repository of Grey Literature 8 records found  Search took 0.02 seconds. 
Castings from TiAl alloys for the IC engines
Kašpar, Jan ; Záděra, Antonín (referee) ; Zemčík, Ladislav (advisor)
The bachelor tesis is focused on intermetalic alloys of TiAl. Analysis of microstructure including heat threatment and alloying. Next part is focused on melting and casting TiAl including safety of work and recyklation. Last chapter is developed to apllication mainly engine valves.
Castings from TiAl alloys for the turbochargers
Kudýn, David ; Malec, Silvestr (referee) ; Zemčík, Ladislav (advisor)
The bachelor thesis is focused on the analysis of intermetallic alloys TiAl. First of all, it is analysed their properties and the way how they change depends on their treatment and influencing of alloying elements. Then ways of utilization in practice are stated here. Attention is concentrated especially on turbochargers wheel and their comparison to convention materials. After that individual options of melting and casting and materials for melting crucibles and moulds associated with them are there discussed. In the end, the thesis has analysed the ways of recycling of residual material.
The optimization of melting as a decomposition process for material analysis.
Ptáček, Martin ; Koplík, Jan (referee) ; Šiler, Pavel (advisor)
Fusion is the process in which the sample particles are dissolved in the flux. This is used for the decomposition of substances which under normal conditions do not decompose in acid. For example, silicon, which is a substantial part of cement, is not degraded under standard conditions, so it is fused. Fusion may be in solution or in a pearl. Solution fusing is used for ICP-OES rather than XRF pearls. In addition to the pearl, XRF can also be measured in powder, but it is less accurate. This bachelor thesis deals with decomposition of standards and comparison of measured values with certified values. In the course of the work, samples of the standards were decomposed using several types of fluxes, measured at ICP-OES. The same standards were measured using XRF in the form of pearls. In addition to these two methods, elemental analysis of sulfur content was also performed. These methods were finally compared. From the measured data we can say that the best results are achieved with the ICP-OES method.
Sintering of Char from Biomass
Hanus, Vlastimil ; Baláš, Marek (referee) ; Lisý, Martin (advisor)
: Hanus Vlastimil: Melting of ashes from biomass. Diploma Thesis Masters 5th year, academic year 2009/2010, the study group 5o / 2 FSI VUT Brno, Department of Energy, Department of Energy Engineering, May 2010th The project developed under the Energy Master field engineering design work by Melting of ash from biomass. Job description is to undertake research of methods for determining the characteristic temperatures of ash. Described are the properties of biofuels and their composition. Experimentally verify the individual methods and the influence of basic parameters on the temperature.
The determination of the composition of refractory material by X-ray fluorescence.
Janča, Martin ; Šilerová, Iva (referee) ; Šiler, Pavel (advisor)
The goal of this Bachelor thesis is to find the right way for the analysis of the refractory materials that would be accurate and could be repeated. The ideal method that would help us achieve our goal seems to be the fluorescent spectrometric analysis. This method is used very often in case of instant control of the quality of production in the cement and other heavy industry enterprises. Using the fluorescent spectrometric analysis comes with one issue, which is the presence of many distorting interferences. From this particular reason it is necessary to identify these interferences and then find the ideal solution of their elimination. Because of the possibility to have the sample in any shape or form at the x-ray florescent spectrometer it was necessary to choose the right method of preparing the sample for the analysis as well as choose the right parameter for the measuring itself and for the elimination of undesirable interferences.
Manufacture of aluminium alloy castings
Moravec, Lukáš ; Lána, Ivo (referee) ; Záděra, Antonín (advisor)
This thesis deals with the production of castings of aluminum alloys with a focus on a comparison of the melting process in the gas, crucible, tilting furnaces with melting in gas, shaft furnaces. Resolves proposal links the advantages of both types of melting furnaces into a single unit. The work includes economic evaluation of cost and projected savings in the operation of the new kiln unit.
Binders on the base alumina cements and their properties
Morávková, Jitka ; Cupák, Petr (referee) ; Burianová, Klára (advisor)
The Bachelor Thesis describes chemical and mineralogical structure, as well as alumina cements manufacture and some of their physical and techno-logical properties. It takes accelerators or plasticizers induced changes by search method. An illustrative laboratory measurement of mixture with accel-erator and plasticizer is complementary to theoretical knowledge in fluidity, air permeability and strength of mixture with aluminium silicate cement binder.

Interested in being notified about new results for this query?
Subscribe to the RSS feed.