National Repository of Grey Literature 419 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
Apartment Building in Jablonné nad Orlicí
Tejklová, Šárka ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
At the almost flat plot number 411/3, cadastre unit Jablonné nad Orlicí was designed a new apartment building with an service establishment. Local zoning plan of the village defines the plot as a buildable area. The building has one basement and three floors. There are 7 dwelling units and a hairdresser's in the building. The living area and the service establishment have separate entrances. The building is designed with wheelchair access. On the first floor there is an accessible two-bedroom flat with kitchenette and hairdresser's, on the second floor there are two two-bedroom flats with kitchenette and two studios apartment, on the third floor there are two three-bedroom flast with kitchenette. In the basement there is cellar boxes and technical facilities of the building. The foundations are made of a system of foundation strips made of plain concrete, external wall of floors is walled with clay blocks and insulated with external thermal insulation composite system (ETICS). Staircase and floor structures are made of reinforced cast-in-place concrete. The building is roofed with a non-walkable flat roof.
Apartment House
Pokluda, Jiří ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The aim of this bachelor's thesis is the elaboration of project documentation for the construction of a new apartment building in the southwestern part of the village Holubice. The building is designed as a detached building with four above-ground and one underground floor partly below ground level. In the apartment building with a single-layered flat roof, there are 8 residential units, technical facilities and house equipment. There is also a designed elevator in the building. The drawing part is processed using the AutoCad program, the visualization is processed in the ArchiCad and Lumion program.
Apartment building
Lukešová, Michaela ; Nespěšný, Ondřej (referee) ; Pěnčík, Jan (advisor)
The subject of the bachelor's thesis is the elaboration of a part of the project documentation for the construction of an apartment building. The apartment building is located in the cadastral area of Opočno pod Orlickými horami. The building has four floors and a partial basement. In the basement of the building are designed cellars, utility room, elevator engine room and air conditioning. On the ground floor there is a cleaning room, a bike shed / carriage house and two residential units. The second and third floors are identical in layout and there are two residential units, on the fourth floor there is a residential unit with a terrace and a common room with kitchen and toilet. A total of seven residential units are designed in the building. Vertical load-bearing and non-bearing structures are made of ground brick blocks, in the basement there are perimeter structures made of monolithic reinforced concrete. Horizontal load-bearing structures are monolithic reinforced concrete, reinforced according to static calculation. The insulation of the building is solved by the contact insulation system ETICS.
Apartment house
Kuťáková, Barbara ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
The bachelor´s thesis deals with the design of a 4 flours and partially basement new apartement house in city od Pardubice. The subject of the bachelor's thesis is the elaboration of a part of the project documentation for the construction realization. In the basement there is a cellars and bike shed. On the first floor there is a vestibule, carriage room, technical room, cleaning room, stock and 3 dwelling units. The second and third floors are identical in layout and there is 4 dweling units in both od the floors. The fourth contains 2 dwling units with private terraces. The vertical load-bearing structure system is designed of hollow clay blocks. The vertical load-bearing structure systém in the basement is designed of reinforced concrete. Horizontal load-bearing structures are designed as prestressed prefabricated panels. Stairs are designed as cast-in-place reinforced concrete. The roof structure is designed as a warm flat roof. Certified contact thermal insulation system is designed.
New apartment building
Křičenský, Adam ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
The subject of the bachelor’s thesis is the processing of the design documentation for execution of an apartment building. Designed building is located in Hrochův Týnec. The access to the building is from the south. The plot is flat and it disposes with parking places for nineteen cars. It is a building with three above-ground floors and partial basement that is designed with a total 8 dwelling units. The structural system of the designed building is wall system. All vertical structures are made of clay brick. The exception are external walls in the basement, that is designed of concrete blocks (permanent formwork). The horizontal structures are designed of prefabricated rib-and-filler floor that is made of ceramic concrete ceiling beams, ceramic inserts and overconcrete. The conection structure of the building is the cast-in-place reinforced concrete staircase. The roof is designed as a green flat roof in combination with the walkeble flat roof. The roof above the stairwell is designed as a non-walkeble flat roof. The thermal insulation of the whole object is made of the ETICS certified contact thermal insulation system. The apperance of the building is completed by facade colours that are selected in shades of white, light gray and dark gray.
Flat House
Jakubčík, Lukáš ; Novotný, Miloslav (referee) ; Novotný, Miloslav (advisor)
This bachelor´s thesis deals with the design of detached apartment building in Mikulov. The apartment building is set into the sloping terrain of the town of Mikulov and consists of one basement and four above-ground floors. From the first to third above-ground floors two residential units with balconies are designed, on the top fourth floor is one spacious residential unit with access to the outdoor terrace. The floors are serviced by a staircase supplemented by an elevator in a separate elevator shaft. The building uses a structural system of ceramic parts for vertical and horizontal structures, part of the foundation structure is made of lost formwork. The roof of the building is warm flat roof. The bachelor´s thesis contains project documentation for the construction.
Marketing project proposal
John, Dominik ; Vajda, Radim (referee) ; Juřica, Pavel (advisor)
This bachelor thesis discusses the usage of project management methods during the planning and execution of a marketing event project. Theoretical knowledge and methods are being used to create a proposal of a functional project documentation. It also describes the advantages this approach yields.
Design of reconstruction of LV electrical installation in HV substation
Vašulín, Jakub ; Mastný, Petr (referee) ; Janík, Daniel (advisor)
The topic of this work covers a theoretical description of project design for reconstruction of high voltage distribution system point. The aim of the work is to prepare material on the level of detail design documentation which covers not only design itself but also a theoretical description of external influences, a discussion of TECOMA Foxtrot system facilities and a characterization of standard specifications for individual types of rooms. Aquired knowledge was used detail project documentation which is an integral part of this work.
Electrical installation for a family house with automation elements
Souček, Tomáš ; Janík, Daniel (referee) ; Mastný, Petr (advisor)
The aim of this work is to familiarize with the implementation of power and data distribution and systems for automation of electrical installation. Furthermore, to define the principles necessary for the creation of the project documentation of the electrical installation of a family house. The first part of the thesis deals with the definitions and principles associated with safety and the methods of ensuring it, which must be taken into account when creating project documentation. This theses also deals with the conditions and selected methods of connection of the building to the low-voltage distribution network, methods of execution of high-current and low-current installation and systematic installation . The second part deals with the elaboration of a specific electrical installation project for a family house. The content of this point of the assignment is the design of the installation of the high and low-current circuits of the family house, including the systematic installation. It also includes the design of the electric switchboard, lightning protection system and the preparation of technical documentation in accordance with the applicable technical standards.
Design of PV plant with accumulation for commercial building
Jörka, Lukáš ; Morávek, Jan (referee) ; Mastný, Petr (advisor)
This Master´s Thesis deals with the design of photovoltaic power plant with accumulation for commercial building in the city of Holešov. The first part of the thesis describes the requirements for connection and operation of power supplies with inverters according to Annex 4 of the PPDS and the European Commission directive RfG. The second part of the work focuses on the theory of photovoltaic systems, while their basic concepts are introduced, the individual components of photovoltaic systems are described, and eventually, the issue of inverters dimensioning is discussed in more depth. In the practical part of this thesis, the design of photovoltaic power plant with accumulation using the PVSOL program is performed. Within the design, components for PV plant with accumulation are selected, the project documentation of PV plant for building permit is prepared and the energy-economic analysis of the proposed solution is performed.

National Repository of Grey Literature : 419 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.