National Repository of Grey Literature 88 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
Design of repair material with reduced electrical impedance
Žáková, Karolina ; Černý, Vít (referee) ; Drochytka, Rostislav (advisor)
This bachelor's thesis focuses on designing a new composition of corrective material based on silicate with the aim of reducing electrical impedance. In the theoretical part, fundamental concepts necessary for understanding the topic will be described, such as terms related to conductivity, silicates, composites, and corrective materials in general. The experimental section includes the selection of raw materials, preparation, and testing of various compositions of corrective materials with different fillers. The impact of various additives on the electrical properties of the corrective material will be investigated, including its conductivity, resistivity, and cohesion. The final section summarizes and evaluates the achieved results.
New lightweight floors with secondary raw materials
Tůmová, Eva ; Bydžovský, Jiří (referee) ; Ďurica,, Tibor (referee) ; Kolář,, Karel (referee) ; Drochytka, Rostislav (advisor)
The thesis deals with the development of new type of lightweight floors based on secondary raw materials. In the introduction, the current knowledge in the field of lightweight building materials, especially screeds and lightweight porous concrete, is presented. The thesis describes brief history of production of aerated concrete and its development up to the present. Further, the thesis describes the procedure of design and testing of new lightweight materials for use in floors. The proposed recipe has been thoroughly tested and the best combination of components for use in lightweight porous concrete floor screed has been selected. The thesis also examines the microstructure of the material being developed. The main result of the dissertation is the developed product, which is already used in practice and is produced and sold on the market as part of the system of lightweight building materials.
Proposition of new type of injection material with electrically conductive function
Uher, Vojtěch ; Černý, Vít (referee) ; Drochytka, Rostislav (advisor)
The bachelor thesis deals with the design of a new type of grouting material with electrically conductive function suitable for connecting cracks and gaps in building protection systems against lightning strikes and surges. The theoretical part summarizes the important knowledge about the grouting and grouting materials, introduces the current state of knowledge in the field of lightning and surge protection of buildings and also the preconditions of electrical conductivity of cement-based composite materials. In the practical part are summarized selected properties, which the electrically conductive grouting material should have and the relevant standards tests for experimental verification of selected properties are described. A wide range of primary and secondary fillers are studied and the most suitable ones are chosen to achieve a low electrical resistivity value. At the end of the thesis, there are recipes based on amassed knowledge and using secondary fillers to reduce the environmental impact of the developed materials during mass production. Reduced resistivity has been demonstrated in recipes using waste carbon and chopped carbon fibers, but has failed to fully meet standard requirements. The result of the work are new recipes and knowledge that can serve as a basis for further research.
Industrial sludges as alternative fuel in cement plant
Raška, Miroslav ; Kalina, Lukáš (referee) ; Opravil, Tomáš (advisor)
This thesis deals with the use of industrial sludge as an additive to alternative fuels in the cement industry. The first part is focused on solid alternative fuels, especially sewagesludge, processed and used in the firing process of Portland clinker and heatingpotential of the secondary raw materials, fuels. The second part deals with the history, production of cement and its raw material base. The last part contains information of practical measurements and draw conclusions about the appropriateness of using that type of industrial sludge in cement as a solid alternative fuel.
The Use of Alternative Sources in the Building Industry
Dvořák, Jakub ; Vymazal, Tomáš (referee) ; Žižková, Nikol (advisor)
This bachelor thesis is focused on the use of waste as alternative raw materials in construction industry. The first part is dedicated to the historical development of waste management, to the valid legislation in the Czech Republic in 2017 and outlines the distribution of waste according to various criteria. The information about waste production and waste management is processed in the form of tables and graphs. The more extensive second part of the thesis uses theoretical knowledge in the field of waste management and on the base of the Waste Separation Catalog is composed a list of waste materials which can be used in construction industry. Further are described the possibilities of suitable waste utilization at production and also mentioned some particular construction products with their features.
Development of adhesive material for the installation of basalt elements on silicate foundations under severe exposure conditions
Bergerová, Kamila ; Jakubík, Aleš (referee) ; Drochytka, Rostislav (advisor)
The diploma thesis deals with research and subsequent development of a new adhesive material for the installation of nonabsorbent basalt elements on silicate foundations under severe exposure conditions. For commercially produced tile adhesives, only primary raw materials are used as fillers. The purpose of this work is to evaluate the possibility of utilization of secondary raw materials as fillers in the tile adhesive. The thesis is mainly focused on the durability of these materials after exposure to the aggressive environment.
New Possibilities to Reduce Raw Material Costs in the Cordierite Production
Sopko, Marek ; Lang, Karel (referee) ; Nevřivová, Lenka (advisor)
The diploma thesis focuses on new possibilities to reduce raw materials costs in production of heat-resistant cordierite ceramics. Cordierite is very often used as furnace wagon lining and for production of blazing utilities for its high resistance against temperature changes. The thesis gives complete overview of cordierite material. It includes description of different production technologies for form-pieces preparation, raw materials for their production and their applications. The goal of performed laboratory measuring in an experimental part was to verify and prove a possibility of reducing raw-material costs in production of cordierite ceramics by using cheaper preferably secondary raw materials.
Proposal of a highly resistant composite with high proportion of secondary raw materials as fillers for the reconstruction of cast basalt objects
Čtvrtečková, Anna ; Černý, Vít (referee) ; Drochytka, Rostislav (advisor)
This work is focused on the development of highly resistant repair composite for rehabilitation of objects or elements of cast basalt, focusing on the use of secondary raw materials as fillers. The composite should be as close as possible to the properties of cast basalt objects, especially by chemical and heat resistance, abrasion resistance and high compressive strength to withstand demanding industrial conditions.
Study of microstructure of autoclaved aerated concrete with using of secondary raw materials
Martanová, Jana ; Suchý, Peter (referee) ; Kulísek, Karel (advisor)
Autoclaved aerated concrete is a used building material, especially for its thermal insulating properties. During autoclaving, an aerated concrete microstructure produces crystalline CSH phases, primarily tobermorite. The ingoing substances are calcium oxide and silica. In addition to commonly used raw materials, secondary raw materials rich in silicon dioxide can be used for production. The use of secondary raw materials gives the opportunity for the construction industry to be more environmentally friendly. Another benefit is the reduction of financial costs. The work explores the influence of individual secondary raw materials on the microstructure. High-temperature fly ash, fluid fly ash, cinder, ground glass and zeolite were used The raw materials were mixed with unalloyed lime at a molar ratio of calcium oxide to silicon dioxide of 0.73 and 1.0. Autoclaving capsules were used to synthesize tobermorite under laboratory conditions. Autoclave was performed at 170 °C and 190 °C with hydrothermal durations of 4, 8 and 16 hours. The most important influence on the microstructure was high-temperature fly ash, on the contrary, the greatest influence on the mechanical properties is attributed to the ground glass.
Development of lightweight porous concrete flooring on waste material basis
Šenk, Josef ; Ševčík, Milan (referee) ; Drochytka, Rostislav (advisor)
This thesis is oriented on lightweight building materials and on development of new leightweight porous concrete flooring on waste material basis.

National Repository of Grey Literature : 88 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.