|
|
Selected structures of the family house
Kulík, Karel ; Švaříčková, Ivana (referee) ; Perla, Jan (advisor)
The bachelor thesis is focused on the design of selected reinforced concrete structures of the family house, it is a continuous ceiling plate and a staircase. The structures were designed and assessed to the ultimate limit state and the serviceability limit state. Calculations were made using the Dlubal RFEM 6 and Microsoft Excel programs. The outcome of the calculations is a static calculation. The design documentation including form and reinforcment mechanical draws was created in Archicad 26 and CADCON+ RC 2023.
|
|
|
Family house
Purgat, Martin ; Zlámalová, Pavlína (referee) ; Švaříčková, Ivana (advisor)
Bachelor's prize dealing with the state of all states in the territory of the family house. The aim of the work is to design new layouts and adjust the branches designed in the presented products in internships in internships in internships of internships of internships. Subsequently, a static calculation of the city by contractions is made, which includes their dimensional and assessment of the ultimate limit state and usability. The individual bones of the ceiling located above the ground floor family houses are assessed for these conditions. Between the assessed contrasting jaws, a monolithic ceiling slab, beams, balcony, staircase and column, which is directly connected to the ceiling slab. The calculation of internal forces was demonstrably in the student versions of the Dlubal RFEM 5 program. It is part of the trade documents for the life of the mentioned elements. The export was proceeded according to valid standards and principles.
|
|
|
Static solution of a typical floor of an apartment building in Oslavany
Kurtin, Ladislav ; Šimek, Ondřej (referee) ; Zich, Miloš (advisor)
The bachelor thesis deals with the structural design of a typical floor of a residential building in Oslavany. The first part deals with the design of the ceiling structure above the second floor and the construction of the staircase. Using a slab model in SCIA Engineer 22.0, the internal forces on the floor slab were determined and the structure was assessed for ultimate limit state and serviceability limit state. The staircase was modeled with a member and slab model. Finally, a simplified assessment of the ceramic block masonry, specifically the intermediate bearing and perimeter walls, was performed. The bachelor thesis contains the structural calculation and drawings of the above mentioned elements.
|
|
|
Static solution of the underground floor of an apartment building in Oslavany
Šafránková, Vendula ; Švaříčková, Ivana (referee) ; Zich, Miloš (advisor)
The subject of the bachelor thesis is the design and static analysis of underground carpark, which is part of an apartment building. This new development will be situated in Oslaveny. For the work was used drawings with a basic floor plan dimension and heights. The work includes a static calculation and drawing documentations. Static calculation is solved by a combination of manual calculation and software´s calculation. SCIA Engineer 22.0 program is used to calculate the internal forces. The design of the shear reinforcement is performed using Schöck Bole program. The static calculation includes design and assessment point-supported slab and columns and caps. The structure is designed according to valid standards ČSN EN.
|
|
|
Design of a heating system for the kindergarten and elementary school building
Kulišťák, Tomáš ; Maurerová, Lenka (referee) ; Vyhlídalová, Karolína (advisor)
The goal of the bachelor´s thesis is to design heating and hot water heating for kindergarden and elementary school which is located in Vsetín. The building has two above ground floor and no underground floor. Heating is designed for the entire building. Distribution of heat to the space is provided by radiators. The piping system is designed from copper. As heat sources are designed 3 gas condensing boilers. Ventilation in the building is forced by an air-conditioning unit with heater and with heat recovery. Hot water is heated by a tank heater.
|
|
|
Static solution of a typical underground floor of a tall building in Prague
Maršálek, Filip ; Šimůnek, Petr (referee) ; Zich, Miloš (advisor)
This bachelor's thesis deals with the static design of the ceiling structure of a high-rise building. The basis for the bachelor was drawing documentation with basic plan dimensions and heights. The aim of the work is to design a locally and point-supported ceiling slab in the form of a section of one floor, specifically the ceiling above the second underground floor. According to the assigned study, a board model was created in the SCIA Engineer program for the analysis of internal forces, on the basis of which the design of the bending reinforcement of the board was carried out for the limit state of bearing capacity. The design of the shear reinforcement is based on the internal forces from the 2D model and was carried out using the Schöck Bole program with manual verification of selected parts. Furthermore, crack widths were manually calculated and verified via SCIA Engineer. The last calculation was a non-linear deflection calculation in SCIA Engineer. The conclusion of the work was the design of a variant with headers and a comparison of both types of boards. The work includes static calculation and drawing documentation.
|
|
|
Design of a heating system of a new apartment building
Kaša, Filip ; Maurerová, Lenka (referee) ; Vyhlídalová, Karolína (advisor)
The bachelor's thesis aims to design heating and hot water heating of a new apartment building in Nové Město na Moravě. The building has one underground floor and four above-ground floors. Heating is designed only for the upper floors, where there are living spaces. The sharing of heat into the space is ensured by plate radiators, tubular radiators and floor convectors. The system is designed in copper piping, as a hot water two-pipe. The system is powered by three gas condensing boilers. Hot water is heated by a storage heater.
|
|
|
Design of the floor slab structure of a tall building
Vintrová, Tereza ; Šimůnek, Petr (referee) ; Zich, Miloš (advisor)
The bachelor thesis deals with the design of the ceiling structure of a high-rise building. The basis for the work was a study of the building with basic floor plan dimensions and heights. The aim of the bachelor thesis is to design a locally supported floor slab with a stiffening core in the middle, as a section of one floor, namely the ceiling above the tenth floor. According to the specified study, a slab model was created in SCIA Engineer to analyze the internal forces based on which the design of the flexural reinforcement of the slab to the ultimate limit state was carried out. The design of the shear reinforcement is based on the internal forces of the 3D model and was done using Schöck Bole with manual verification of the selected column. Non-linear calculation of the 3D model and manual verification of crack widths was used to assess the ultimate limit state. At the end of the work, the design of the circumferential rib variant and the comparison of the two types of slabs was carried out. The work includes a static calculation and drawings.
|
|
|
Static analysis of the cross-section of the lock chamber
Skalník, Stanislav ; Koláček, Jan (referee) ; Zich, Miloš (advisor)
The bachelor‘s thesis deals with static solutions of the lock chamber. Background for this work were static calculations according to safety levels and drawing documentation of the actual structure. Goal is to evaluate the existing solution of the walls and the bottom of the chamber in selected sections based on the internal forces of the wall model created in the SCIA Engineer. Following with global analysis of a nonlinear model reinforced with the main load-bearing reinforcement according to the original design created in the Idea StatiCa Detail. The second part of this work was the design of an alternative solution of the chamber with a type of rib walls with dimensionability verification. Suggestion of the main wall reinforcement and reinforcement of the most stressed rib. Furthermore a comparison with the original solution from the point of view of deformation, material savings and subsequent assessment of the chamber leaching. Static calculations of both variants, drawings of the used reinforcement for the nonlinear model and drawings of an alternative solution containing the shape and schemes of the wall and rib reinforcement are included.
|
|
|
Static solution of parking house
Rose, Dominik ; Koláček, Jan (referee) ; Zich, Miloš (advisor)
The bachelor's thesis is focused on the elaboration of a static solution of a parking house with four above-ground floors. Three variants are elaborated, one of which was elaborated in more detail. The proposed elements are the ceiling slab, the columns and staircase. The SCIA Engineer 20.0 program is used to calculate the internal forces. As part of the work, drawing documentation is also prepared. The structure is designed according to correctly valid standards.
|
guest ::
