National Repository of Grey Literature 15 records found  1 - 10next  jump to record: Search took 0.01 seconds. 
SMV-2021-04: Advanced EDX analysis of miniature painting in ESEM
Neděla, Vilém ; Tihlaříková, Eva
Samples were analysed in experimentally reached and optimised high pressure conditions of environmental scanning electron microscope and using EDS X-Ray micro-analyser.
Optimization of surface pretreatment of steel and aluminum alloy for subsequent application of powder paint
Běloch, Martin ; Březina, Matěj (referee) ; Wasserbauer, Jaromír (advisor)
This diploma thesis deals with various procedures of surface pretreatment of steel and aluminum alloy for subsequent application of powder coating substance. The work begins with an overview of the general characteristics of the materials used. The core part of the work is then a summary of the individual methods of pretreatment that can be used to modify the material surface. A special chapter is devoted to methodologies for the application of powder substances. Before separate application, the sample must first be carefully pretreated to ensure removal of organic compounds (e.g. oils from primary processing - grinding, cutting), or dust impurities to ensure the correct barrier effect. After dividing the individual methods of surface preparation, a powder paint system with a total thickness of approximately 50 µm is applied to the test material. Samples with different surface pretreatments will be compared both in terms of mechanical properties and in terms of electrochemical properties.
Correlative tomography
Vařeka, Karel ; Touš,, Jan (referee) ; Bábor, Petr (advisor)
Předložená diplomová práce se zabývá korelativním přístupem multimodální analýzy struktur prokovování s různým rozlišením. Výzkum je součástí mezinárodního projektu týkajícího se charakterizace poruch zmíněných struktur, které jsou implementovány v polovodičových zařízeních. Kombinace korelativní mikroskopie a tomografie technikami NanoXCT, FIB-SEM (EDS), FIB-SIMS a AFM byla navržena k zavedení opakovatelného pracovního postupu. Tomografie fokusovaným iontovým svazkem je metoda přesného odprašování v řezech, která mimo jiné v každém průřezu získává cenné snímky s vysokým rozlišením (FIB-SEM) nebo mapy chemického složení (FIB-SIMS). Následující transformace obrazu umožňuje identifikaci defektů jako funkci hloubky ve struktuře. Práce dále věnuje pozornost metodám sjednocení obrazů za účelem optimální prezentace získaných dat.
SMV-2020-21: Elemental X-Ray analysis of miniature painting using ESEM
Neděla, Vilém
Miniature painting were analysed in experimentally reached and optimised high\npressure conditions of environmental scanning electron microscope and using EDS X-Ray micro-analyser.
SMV-2019-11: Elemental X-Ray analysis of miniature painting
Neděla, Vilém
Miniature painting were analysed in experimentally reached and optimised high pressure conditions of environmental scanning electron microscope and using EDS X-Ray micro-analyser.
Study of the microstructure of deposited Ni-P coatings with different phosphorus contents
Najser, Tomáš ; Kosár, Petr (referee) ; Wasserbauer, Jaromír (advisor)
The aim of this bachelor thesis was the preparation and characterization of Ni-P coatings with different phosphorus contents on the substrate of AZ91 magnesium alloy. The theoretical part deals with magnesium alloys and specifies the utilized substrate AZ91. It also focuses on Ni-P coatings, their microstructure and their properties. However, there are also described factors affecting the rate of deposition and the resulting behavior of these coatings. Last but not least, the theoretical part summarizes the basic principles of laboratory methods used in the experimental part for observation and characterization of samples. Conclusion of the theoretical part consists of several background researches where the authors deal with similar problems and factors influencing the resulting behavior of Ni-P coatings. The experimental part is focused on the deposition of each Ni-P coatings on the AZ91 alloy and their characterization. The study of deposited Ni-P layers was focused on the determination of their microstructural texture by XRD method, mechanical properties and elemental composition depending on phosphorus content.
Surface pre-treatment of structural aluminum alloys for bonded joints
Pikner, Jan ; Doskočil, Leoš (referee) ; Wasserbauer, Jaromír (advisor)
This thesis deals with pre-treatment of surface of aluminium alloys. The theoretical part focuses on the properties of aluminium and its alloys, on methods of surface treatment and the possibilities of quality assessment of pre-treated surface. The experimental part deals with finding of a proper method of pre-treatment. The quality of surface pre-treatment is assessed by observation by SEM with EDS and by single lap shear tests of adhesive joints. According to evaluated results, the optimalised methods are qualitatively and financially compared with the commercial method.
Optimal X-ray detection for thin samples in low-energy STEM
Rozbořil, Jakub ; Oral, Martin ; Radlička, Tomáš
In many applications it is desirable to perform energy-dispersive X-ray spectroscopy (EDS) on very thin samples at low primary beam energies in a STEM. Thin samples, or lamellae, with the thickness of about 10 nm, are mostly prepared in focused ion beam instruments (FIBs), and they are used to evaluate experiments in the development of thin films and coatings, in the semiconductor industry, and in other applications. EDS then provides a map of different chemical elements or compounds in the sample, obtained by scanning the electron beam in a raster. Often the qualitative composition is known as a limited set of materials and only their distribution on the sample is to be determined. For large batches of samples fast measurements are desired to maximize utilization of expensive equipment. In this study we found a method to minimize the time needed to reliably acquire an elemental map by determining the optimal detector placement and the minimal necessary primary electron dose per pixel.
Determination of mechanical properties and structural evaluation of the alloy AZ61
Svozil, Libor ; Pacal, Bohumil (referee) ; Podrábský, Tomáš (advisor)
Microstructure and mechanical properties of AZ61 magnesium alloy in cast condition and after solution annealing were compared. The compare of mechanical properties of alloy, their hardness and microanalysis of occurring phases are included in this work. For compare has been used a light microscopy, tensile test, hardness measurements and scanning electron microscopy.
Heat and mechanical resistance of zinc coating
Horák, Karel ; Dzimko, Marián (referee) ; Černý, Michal (advisor)
The work is aimed at studying the thermal degradation of the protective zinc coating. Its large part deals with the structure of the various stages of transition and their arrangement, the main emphasis is on analysis of brittle intermetallic phases, which arise due to increased temperature. Conclusion of the work is trying to clear itself causes degradation of this protective layer.

National Repository of Grey Literature : 15 records found   1 - 10next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.