|
| |
|
|
Manufacturing possibilities of modular cabinet
Valčík, Martin ; Řiháček, Jan (referee) ; Podaný, Kamil (advisor)
Bachelor's dissertation in subject Mechanical Engineering is focused on suggestion and evaluation suitable of technologies which are used for production of modular cabinet determined for switchboard cabinets STX, serial marking IP55/IK09 produced by company TVD - Technická výroba, Inc.. Technologies used for production are punching, cutting by laser or plasma beam, bending, welding MAG/MIG, WIG and spot welding. Surface finish is done by powder painting, zinc plating or anodization. In point of economical and quality view as the best procedure was choosed punching, bending, welding by MAG technology and powder painting.
|
|
|
Testing of service life of the bolt fastening used in electron microscopy
Habarka, Ondrej ; Radoš, Jiří (referee) ; Krejsa, Jiří (advisor)
Cílem této bakalářské práce je vybrat vhodný materiál a jeho povrchovou úpravu pro šroubový spoj s jemným závitem na držáku vzorku v elektronovém mikroskopu. První částí je přehled použitelných materiálů a povrchových úprav, které jsou nemagnetické, tudíž neovlivňují elektronový paprsek v mikroskopu. Dále se práce zabývá tvorbou testovacího zařízení na testování životnosti jednotlivých vzorků závitových tyčí. Výsledkem práce je porovnání testovaných materiálů a výběr jednoho nejvhodnějšího pro reálné použití.
|
|
|
Modern slide bearings
Lesák, Tomáš ; Raffai, Peter (referee) ; Maršálek, Ondřej (advisor)
This bachelor thesis is professional research dealing with an overview of slide bearings in current use and their advantages and disadvantages compared with ball and roller bearings. It also describes the design, manufacturing technology, materials used for the manufacture of plain bearings, their coatings types and lubrication which are important factors in the life of the bearings.
|
|
|
The technology of hot-dip galvanizing
Pometlo, Stanislav ; Osička, Karel (referee) ; Mouralová, Kateřina (advisor)
This thesis deals with the technology of hot-dip galvanizing. At the beginning of this work views into the history of hot-dip galvanizing and analysis of known technologies about applying of melted zinc into the surface of material. It further describes modification for surface before application of zinc´s coating. In the next part of the work are summarized the most common corrosions of hot-dip galvanized material. The work follows up the difficultness of operation for hot-dip galvanizing device. At the end of work describes cooperation with Alka Holding s. r. o.
|
|
|
Materials for Passenger Car Bodies
Vondrák, Zdeněk ; Blaťák, Ondřej (referee) ; Hejtmánek, Petr (advisor)
This work is devoted to description of modern personal car body construction, materials of car bodies, surface finishing and methods of body parts joining. The work presents a list of materials that are used during manufacture of individual parts of body. Further, the work is concerned with surface finishing methods, especially those focused on anti-corrosion protection. The final part deals with various options of joining, that we may encounter in the automobile industry.
|
|
|
Evaluation of Surface Layers of Ball and Sliding Bearings Components
Šafář, Martin ; Hutařová, Simona (referee) ; Doležal, Pavel (advisor)
This bachelo’s thesis solve the problems abrasion film bearing. The purpose of this thesis was used four type film, ISOFLON, Xylan 1010, DLC a PTFE + Niborit 5P.By one of tendenci is specifi coefficient friction over tribological test. On the next tendenci was size film for and after a tribological test find, elese size abrasion. Was make chemical analyse of all film.To elements interaction study light microscopy, scanning electron microscopy equipped by energy dispersive mikroanalyses.
|
|
| |
|
| |
|
|
Factors Influencing Thermal Radiative Properties of Metals
Králík, Tomáš ; Hanzelka, Pavel ; Musilová, Věra ; Srnka, Aleš
Data on thermal absorptivity and emissivity are important for calculations of heat flows in cryogenic devices. Although thermal radiative properties of materials used in cryogenics are measured, published and used for more than sixty years we have noticed that sometimes users of that data don’t well understand the significance of individual factors influencing thermal radiative properties. The sensitivity of the thermal radiative properties of metals to the condition of the surface and the difficulty of measurement, especially at low temperatures is probably the reason of dispersion of the published values. The effect of the material and its purity, finishing (machining, mechanical or chemical polishing) and of the protective coatings or accidental layers (water, oxidation) on the thermal radiative properties is not always obvious. Influence of the material, surface treatment, roughness and layers on the surface is discussed on the basis of our 20 year experience with measurement of the emissivity and absorptivity in the range from 20 K to 300 K.
|
guest ::
