|
|
Vectoring in xDSL systems
Rada, Dominik ; Číž, Radim (referee) ; Šilhavý, Pavel (advisor)
This bachelor's thesis presents the approximation of VDSL2 and G.fast transmission systems according to pre-selected cable types. The thesis is also focused on the principle of vectoring and its use. The components of the thesis are explained by initialization process in modems with support of vectoring and approximation of Pre-Coder algorithms. A part of the thesis is a created user application in MATLAB, which displays the influence of vectoring on the transfer rates based on user input. In addition, the application captures primary and secondary line parameters, transmission characteristics, and transmitted masks.
|
|
|
G.mgfast transmission technology
Rada, Dominik ; Ježek, Jiří (referee) ; Šilhavý, Pavel (advisor)
The master thesis deals with G.fast and G.mgfast transmission technologies, including their parameters. The work deals with the principle of vector DMT modulation and the possibility of time duplex TDD and full-duplex FDX in two-way communication used in these technologies. The following is a description of the line using the KHM model, which is suitable for simulations in the transmission band using G.fast and G.mgfast technologies. Subsequently, the disturbing effects of crosstalk at the near end of NEXT and the far end of FEXT and their elimination with these technologies are discussing. Part of the work explains supporting calculations to determine the SNR and bit allocation to calculate the baud rate. The work describes the methods of compensation of crosstalk FEXT and NEXT, which affect the resulting baud rate. The work also includes an application for simulation of transmission speed as a function of distance for G.fast and G.mgfast technologies, allowing changing input parameters and adjusting the transmission bandwidth based on G.9700 and G.9701 standards. Also, in work, an application is created to display the compensation of the influence of the transmitted signal crosstalk FEXT and NEXT, which allow the import of measured crosstalk between individual participants. The issue of influencing crosstalk for accurate measurements in the laboratory is also discussing. An application in the MATLAB environment is creating to display the measured characteristics.
|
|
|
Crosstalk analysis and modelling
Novotný, František ; Mišurec, Jiří (referee) ; Zeman, Václav (advisor)
The thesis concerns the problem of interference modelling for xDSL technologies and Ethernet. The introduction describes the origin of crosstalk, that arise during the operation of the systems and the physical properties of the lines, therefore, the next section describes the properties of the primary and secondary parameters of the homogenous line and their modelling. In order to achieve higher data rates on the metallic line, systems with larger frequency spectrum are applied, resulting in a greater attenuation of the line. This issue and the characteristics determination of the transmission systems are subjects of the mathematical models, which are divided according to the modelling of primary or secondary parameters. The main goal of this work is to describe the effects which influence the performance of data transfer via xDSL and Ethernet technology focusing on internal and external disturbances acting on the cable lines. This is the crosstalk at the near and far end, adaptive white noise, radio frequency interference RFI and impulse noise. Following part of the thesis deals with the properties of xDSL technologies, specifically ADSL2+ and VDSL2 and Ethernet. Another aim is to design applications which enable to test the performance of xDSL and Ethernet transmission systems with its own award simulations interference. The conclusion describes the design and implementation of laboratory experiments for measuring of the efficiency and spectral properties of xDSL. The proposed laboratory protocols are annexed to this thesis, including the measured waveforms.
|
|
|
Interference modelling for xDSL
Čermák, Josef ; Mišurec, Jiří (referee) ; Zeman, Václav (advisor)
This work is focused on the subject of the interference modelling for xDSL technologies. First, the xDSL technologies are explained. Following is the presentation and description of the different kinds of the xDSL technologies. The next part deals with the basic parameters of metallic cable lines – especially the primary and secondary parameters. Nowadays wider bandwidths are used for the achievement of higher data transmission rates. During a higher frequency signal transmission a more intensive line attenuation appears. To identify the transfer characteristics of the lines while using an xDSL system, mathematic models of transmission lines are applied. That is why these mathematic models are dealt with in the next chapter. At the end of this section the mathematic models are compared using the modular and phase characteristics. The main aim of the work is to describe the different impacts which influence the efficiency of the xDSL systems. First, the causes interfering from the inside of the cable are deeply explained: Near End Crosstalk (NEXT), Far End Crosstalk (FEXT), Additive White Gaussian Noise (AWGN). Following is the explanation of the external interfering impacts: Radio Frequency Interference (RFI) and Impulse Noise. The next goal of this thesis is a design of a workstation for the tests of spectral features and the efficiency of the xDSL systems. The work also presents a designed GUI application and its description. The GUI application is an instrument for the choice or data entry of the final interference. The last chapter describes a realization of a measurement and shows the measured characteristics which were recorded on the ADSL tester and oscilloscope.
|
|
|
G.mgfast transmission technology
Rada, Dominik ; Ježek, Jiří (referee) ; Šilhavý, Pavel (advisor)
The master thesis deals with G.fast and G.mgfast transmission technologies, including their parameters. The work deals with the principle of vector DMT modulation and the possibility of time duplex TDD and full-duplex FDX in two-way communication used in these technologies. The following is a description of the line using the KHM model, which is suitable for simulations in the transmission band using G.fast and G.mgfast technologies. Subsequently, the disturbing effects of crosstalk at the near end of NEXT and the far end of FEXT and their elimination with these technologies are discussing. Part of the work explains supporting calculations to determine the SNR and bit allocation to calculate the baud rate. The work describes the methods of compensation of crosstalk FEXT and NEXT, which affect the resulting baud rate. The work also includes an application for simulation of transmission speed as a function of distance for G.fast and G.mgfast technologies, allowing changing input parameters and adjusting the transmission bandwidth based on G.9700 and G.9701 standards. Also, in work, an application is created to display the compensation of the influence of the transmitted signal crosstalk FEXT and NEXT, which allow the import of measured crosstalk between individual participants. The issue of influencing crosstalk for accurate measurements in the laboratory is also discussing. An application in the MATLAB environment is creating to display the measured characteristics.
|
|
|
Vectoring in xDSL systems
Rada, Dominik ; Číž, Radim (referee) ; Šilhavý, Pavel (advisor)
This bachelor's thesis presents the approximation of VDSL2 and G.fast transmission systems according to pre-selected cable types. The thesis is also focused on the principle of vectoring and its use. The components of the thesis are explained by initialization process in modems with support of vectoring and approximation of Pre-Coder algorithms. A part of the thesis is a created user application in MATLAB, which displays the influence of vectoring on the transfer rates based on user input. In addition, the application captures primary and secondary line parameters, transmission characteristics, and transmitted masks.
|
|
|
Crosstalk analysis and modelling
Novotný, František ; Mišurec, Jiří (referee) ; Zeman, Václav (advisor)
The thesis concerns the problem of interference modelling for xDSL technologies and Ethernet. The introduction describes the origin of crosstalk, that arise during the operation of the systems and the physical properties of the lines, therefore, the next section describes the properties of the primary and secondary parameters of the homogenous line and their modelling. In order to achieve higher data rates on the metallic line, systems with larger frequency spectrum are applied, resulting in a greater attenuation of the line. This issue and the characteristics determination of the transmission systems are subjects of the mathematical models, which are divided according to the modelling of primary or secondary parameters. The main goal of this work is to describe the effects which influence the performance of data transfer via xDSL and Ethernet technology focusing on internal and external disturbances acting on the cable lines. This is the crosstalk at the near and far end, adaptive white noise, radio frequency interference RFI and impulse noise. Following part of the thesis deals with the properties of xDSL technologies, specifically ADSL2+ and VDSL2 and Ethernet. Another aim is to design applications which enable to test the performance of xDSL and Ethernet transmission systems with its own award simulations interference. The conclusion describes the design and implementation of laboratory experiments for measuring of the efficiency and spectral properties of xDSL. The proposed laboratory protocols are annexed to this thesis, including the measured waveforms.
|
|
|
Interference modelling for xDSL
Čermák, Josef ; Mišurec, Jiří (referee) ; Zeman, Václav (advisor)
This work is focused on the subject of the interference modelling for xDSL technologies. First, the xDSL technologies are explained. Following is the presentation and description of the different kinds of the xDSL technologies. The next part deals with the basic parameters of metallic cable lines – especially the primary and secondary parameters. Nowadays wider bandwidths are used for the achievement of higher data transmission rates. During a higher frequency signal transmission a more intensive line attenuation appears. To identify the transfer characteristics of the lines while using an xDSL system, mathematic models of transmission lines are applied. That is why these mathematic models are dealt with in the next chapter. At the end of this section the mathematic models are compared using the modular and phase characteristics. The main aim of the work is to describe the different impacts which influence the efficiency of the xDSL systems. First, the causes interfering from the inside of the cable are deeply explained: Near End Crosstalk (NEXT), Far End Crosstalk (FEXT), Additive White Gaussian Noise (AWGN). Following is the explanation of the external interfering impacts: Radio Frequency Interference (RFI) and Impulse Noise. The next goal of this thesis is a design of a workstation for the tests of spectral features and the efficiency of the xDSL systems. The work also presents a designed GUI application and its description. The GUI application is an instrument for the choice or data entry of the final interference. The last chapter describes a realization of a measurement and shows the measured characteristics which were recorded on the ADSL tester and oscilloscope.
|
guest ::
