|
|
Biodegradable Mg-based materials for stents and bone implants
Zemková, Mária ; Král, Robert (advisor) ; Stráská, Jitka (referee)
The bachelor thesis is focused on the effect of mechanical processing rotary swaging (RS), specifically on the microstructure, mechanical properties and corrosion properties. The investigation was performed on the magnesium alloy AE42 with a different number of RS passes, which can be useful for medical applications. RS is more efficient and cheaper alternative to different material processing methods producing fine-grained struc- ture. Fine-grain structure with grain boundaries with high angle misorientation was achieved by this process. Microstructure was inhomogeneous - the grain size decreased from the surface to the center. An improvement of mechanical properties with the increase in the number of swaging steps was observed. Processing also led to a decrease in corrosion resistance in this alloy. Microstructure development was investigated by electron microscopy scanning. Development of mechanical properties was characterized by compression deformation tests and microhardness measurements. Linear pola- rization method was used for the interpretation of corrosion resistance. 1
|
|
|
Magnesium alloys designed for medical applications
Zemková, Mária ; Minárik, Peter (advisor) ; Vojtěch, Dalibor (referee)
Title: Magnesium alloys designed for medical applications Author: Mária Zemková Abstract: This Master thesis is focused on the influence of hot extrusion and equal channel angular pressing (ECAP) on the microstructure, mechanical and corrosion properties of magnesium alloys. Investigated materials include three magnesium alloys with the addition of neodymium and/or yttrium elements - N3, W3 and WN43, as a potential material for medical applications. Moreover, the influence of alloying elements in solid solution state was studied. Microstructure development was characterized by scanning electron microscopy together with transmission electron microscopy and X-ray diffraction. Mechanical properties was studied by compression deformation tests in two perpendicular directions and by microhardness tests. The linear polarization method was used to study corrosion resistance. The processing though ECAP resulted in grain refinement in all three alloys. Ultra-fine grained microstructure was achieved in W3 and WN43 alloy. The high degree of recrystallization during ECAP caused the formation of high-angle grain boundaries in all three alloys. Weak texture evolution was maintained during both processings. A different initial fraction of intermetallic phases before extrusion led to significant changes of microstructure...
|
|
|
Biodegradable Mg-based materials for stents and bone implants
Zemková, Mária ; Král, Robert (advisor) ; Stráská, Jitka (referee)
The bachelor thesis is focused on the effect of mechanical processing rotary swaging (RS), specifically on the microstructure, mechanical properties and corrosion properties. The investigation was performed on the magnesium alloy AE42 with a different number of RS passes, which can be useful for medical applications. RS is more efficient and cheaper alternative to different material processing methods producing fine-grained struc- ture. Fine-grain structure with grain boundaries with high angle misorientation was achieved by this process. Microstructure was inhomogeneous - the grain size decreased from the surface to the center. An improvement of mechanical properties with the increase in the number of swaging steps was observed. Processing also led to a decrease in corrosion resistance in this alloy. Microstructure development was investigated by electron microscopy scanning. Development of mechanical properties was characterized by compression deformation tests and microhardness measurements. Linear pola- rization method was used for the interpretation of corrosion resistance. 1
|
guest ::
RSS feed.