|
|
Apartment building
Balash, Ievgen ; Různar, Daniel (referee) ; Brukner, Bohuslav (advisor)
This bachelor's thesis deals with the processing of project documentation for the realization of an apartment building. It consists of 5 floors and one underground floor partially dipped into the slightly sloping terrain. There are parking slots also provided for house residents on the underground floor. Parking is solved using mechanical parking system. A total of 22 residential units are located on the upper floors. The wall-based construction system is used in a projected building. It is a combination of monolithic walls and masonry made of sand-lime bricks. The perimeter walls are insulated with a contact thermal insulation system. The ceilings are made of monolithic reinforced concrete. The warm flat roof construction solution was used for this building.
|
|
|
Apartment building in Olomouc
Zbořil, Dominik ; Různar, Daniel (referee) ; Bantová, Sylva (advisor)
The subject of the bachelor thesis is the design and elaboration of the project documentation for construction for the apartment building. The proposed apartment building is located in Slavonín, a city district in Olomouc. The apartment building is designed as a detached building with three above-ground and one underground floor. Part of the land where the apartment building is designed is flat. There are a total of 8 residential units in the apartment building, while the apartments on the 1st floor have a large terrace with a separate garden, the apartments on the 2nd floor have a spacious balcony. On the 3rd floor there are only two residential units, one apartment has a large terrace, the other has a balcony. Each apartment has its own cellar cubicle in the basement. There are also a technical and cleaning room, a bycicle and pram storage room and a meeting room. An elevator connecting all floors is designed in the building. The apartment building is based on concrete foundation strips, the vertical load-bearing structures in the basement are formed by permanent formwork. The load-bearing structures above the terrain are realized by brick blocks, which are insulated with the external thermal insulation composite system ETICS. Horizontal load-bearing structures are designed as reinforced concrete slabs. The whole building is covered with a warm flat roof with extensive vegetation. There are also other warm flat roofs in the building, one covering the entrance of the apartment building and the other forming a terrace. The whole building is designed as a building with almost zero energy consumption.
|
|
|
Apartment building in Rychnov nad Kněžnou
Daníček, Michal ; Různar, Daniel (referee) ; Bantová, Sylva (advisor)
The subject of this bachelor's thesis is the design of a new apartment building in Rychnov nad Kněžnou. The building plot is situated in a quiet part on the eastern outskirts of the city. The apartment building is detached and contains one underground and four above-ground floors. In the above-ground part, there are a total of 13 housing units and in the underground part, there are cellar cubicles, storage rooms, a technical room, and common areas such as a bicycle shed, a drying room, and a carriage house. The house has a simple rectangular floor plan and a recessed top floor. The building is based on foundation passes. The vertical load-bearing system of the above-ground floor is a brick combination of lime-sand blocks of aerated concrete blocks. The basement is made of lost formwork fittings. The horizontal load-bearing ceiling structures are monolithic reinforced concrete complemented by reinforced concrete wreaths and in other places also by reinforced concrete girders. The roof structure is designed as a single-skin flat roof with extensive vegetation.
|
|
|
Residence Lazce
Ambrozek, Patrik ; Různar, Daniel (referee) ; Bantová, Sylva (advisor)
The bachelor's thesis deals with project documentation for the new construction of a residential building Rezidence Lazce. The proposed building is located on the outskirts of Olomouc on the border of three districts Lazce, Hejčín and Černovír, at the same time the building is located in the immediate vicinity of PLA Litovelské Pomoraví, which provides sports and relaxation for residents and at the same time in the vicinity of the house, further construction is being built in the direction of the PLA. We must not forget the river Moravia, with which the building is adjacent across the street on the east side. Thanks to the river, the building is located in the historic flood area Q100, or century-old water, which will soon change, as the city invests considerable resources in flood control measures, due to floods in 1997. The building is 4 storeys, where the first floor and is equipped with cellars, a bicycle shed, a pram, a sports facility with an infrared sauna, a meeting room and a technical room. On the remaining floors there are always 3 residential units 3 + KK, 2 with a spacious terrace to the west and the last smallest to be overlooking the river Moravia to the east. The house is based on concrete foundation strips in combination with lost formwork, which raises the building 0.5 m above the level of LT, precisely because of the flood area. The vertical construction system consists of Porotherm ceramic blocks. The horizontal structures are then made of monolithic reinforced concrete ceiling slabs. The building is insulated with a ventilated facade with a visible layer of face masonry. The roof of the house is then extensive vegetation.
|
|
|
Production Hall in Černá Hora – Selected Parts of Construction-technological Project
Různar, Daniel ; Štěpán, Richard (referee) ; Motyčka, Vít (advisor)
The topic of my master's thesis are selected parts of the construction technology project Production Hall in Černá Hora with administrative part. Thesis contains engineering report, construction budget, time schedule for the whole construction, deployment of mechanisms and staff, project of construction site, study of the implementation of the main technological stages, the most appropriate construction mechanisms, routes of mechanisms, ranges and travels of mechanisms, financial and time schedule of the main building, technological specification for established pilots and montages of prefabricated skeleton, control and test plan, implementation of pilots, proposals of design of movement mechanisms, comparison of cladding of ventilated facades, skeleton assembly procedure diagrams and noise study of the construction site.
|
|
|
Apartment building
Různar, Daniel ; Šoulová, Eva (referee) ; Vlček, Milan (advisor)
The subject of this bachelor thesis is a new building of an apartment house in Boskovice. The building will have one underground floor and three above-ground floors with a residential attic. In the underground floor there is a collective garage with a double deck car parking system. The first floor has two flats, one of which is designed for people with reduced mobility and movement . There are also two apartments on the second floor and one apartment with a roof terrace on the third floor. The main entrance is designed to the southeast. The entrance to the garage is from the residential area located in the northwest. The apartment building is designed from a single masonry construction system with a prefabricated and partly monolithic reinforced concrete structure. The roof is designed as double layer dormer roof.
|
guest ::
