|
|
Structure and mechanical properties of magnesium materials prepared by SPS
Pleskalová, Kateřina ; Hutařová, Simona (referee) ; Doležal, Pavel (advisor)
This diploma thesis deals with the processing of the magnesium-based powder materials with the addition of zinc by the spark plasma sintering. The aim of this thesis is to evaluate influence of sintering parameters and zinc content on the microstructure and mechanical properties of the material. First part of the thesis is literary research which is divided into two main chapters. The first chapter describes magnesium-based materials and mentions their use as biomaterials. The second chapter discusses powder metallurgy, specifically magnesium powders and spark plasma sintering. In the experimental part the powders were sintered at temperatures 300 °C and 400 °C and an analysis was performed using optical microscope, scanning electron microscope, then also EDS analysis and hardness, microhardness and three-point bending tests were performed. An increase in hardness was observed with increasing zinc content and with increasing sintering temperature. The flexural strength was higher for materials sintered at a temperature of 400 ° C.
|
|
|
Microscopy: tool for material analysis
Pleskalová, Kateřina ; Řehořek, Lukáš (referee) ; Čupera, Jan (advisor)
This thesis deals with description of the microscopic techniques that are used to analyse materials. The introductory part briefly summarizes the history of microscopy. The first part of the thesis is focused on light microscopy and the confocal microscopy technique is more elaborated here. The second part of the thesis is focused on basic techniques of electron microscopy, which means transmission electron microscopy and scanning electron microscopy. At the end of each chapter, there is summarization of limits and advantages of these techniques. The preparation of metallographic samples is also briefly described for these microscopic techniques.
|
|
|
Structure and mechanical properties of magnesium materials prepared by SPS
Pleskalová, Kateřina ; Hutařová, Simona (referee) ; Doležal, Pavel (advisor)
This diploma thesis deals with the processing of the magnesium-based powder materials with the addition of zinc by the spark plasma sintering. The aim of this thesis is to evaluate influence of sintering parameters and zinc content on the microstructure and mechanical properties of the material. First part of the thesis is literary research which is divided into two main chapters. The first chapter describes magnesium-based materials and mentions their use as biomaterials. The second chapter discusses powder metallurgy, specifically magnesium powders and spark plasma sintering. In the experimental part the powders were sintered at temperatures 300 °C and 400 °C and an analysis was performed using optical microscope, scanning electron microscope, then also EDS analysis and hardness, microhardness and three-point bending tests were performed. An increase in hardness was observed with increasing zinc content and with increasing sintering temperature. The flexural strength was higher for materials sintered at a temperature of 400 ° C.
|
|
|
Microscopy: tool for material analysis
Pleskalová, Kateřina ; Řehořek, Lukáš (referee) ; Čupera, Jan (advisor)
This thesis deals with description of the microscopic techniques that are used to analyse materials. The introductory part briefly summarizes the history of microscopy. The first part of the thesis is focused on light microscopy and the confocal microscopy technique is more elaborated here. The second part of the thesis is focused on basic techniques of electron microscopy, which means transmission electron microscopy and scanning electron microscopy. At the end of each chapter, there is summarization of limits and advantages of these techniques. The preparation of metallographic samples is also briefly described for these microscopic techniques.
|
guest ::
