|
| |
|
|
Reinforced concrete structure of office building
Lagiň, Juraj ; Šulák, Pavel (referee) ; Girgle, František (advisor)
The Bachelor thesis deals with structural solution and comparing of the two variants of reinforced concrete slab structure of administrative building. First variant, designed like a slab with full section, is being compared with a variant of slab, which is designed like a voided slab by formwork U-boot. The structure is designed and assessed for ultimate limit state in accordance with ČSN EN 1992-1-1: Design of concrete structures – Part 1-1: General rules and rules for building.
|
|
|
Application of FRP reinforcement in the design of concrete structures
Kratochvílová, Barbora ; Lagiň, Juraj (referee) ; Girgle, František (advisor)
This bachelor thesis deals with two types of reinforcement FRP reinforcement and generally used steel reinforcement. The first part of this thesis is focused on theoretical knowledge related to FRP reinforcement. There is described its composition, properties, production, durability and its design properties from a theoretical point of view. In the following part, the design and assessment of a specific prefabricated U part is performed. The design and assessment is performed in two variants from FRP reinforcement and steel reinforcement.
|
|
|
Design of selected details of concrete structures with embedded FRP reinforcement
Lagiň, Juraj ; Matušíková, Anna (referee) ; Girgle, František (advisor)
The diploma thesis is devided into two levels. The Primary part of the thesis is the theoretical part, which is part of project „FV10588 – New generation of spatial prefab made from high-firm concrete with increased mechanical resistence and endurance“, realized in cooperation with Faculty of Civil Engineering at VUT university – Institute of concrete and masonry structures. The project deals with frame corners in the form of steel and composite reinforcement which will compared through experiments and various kind of calculate proceedings. The secondary part of thesis focuses on the static-design project of cooling reservoir, placed under the ground, while is stressed by temperature. The reinforcement of the construction is realized in two ways – steel and composite reinforcement with their effectivity compared.
|
|
|
Design and assessment of the load-bearing part of the reinforced concrete structure
Tihelka, Marek ; Lagiň, Juraj (referee) ; Kostiha, Vojtěch (advisor)
The aim of the bachelor thesis is the design and assessment of a reinforced concrete foundation structure of a sports hall. The proposed solution is a monolithic foundation slab. The design software SCIA Engineer 22.0 was used to determine the reactions acting on the slab and slab internal forces. The reactions were also verified by manual calculations. The slab was assessed for ultimate and serviceability limit state and designed by hand. This work also includes design of reinforced concrete monolithic column. A drawing documentation was also prepared for both reinforced concrete slab and column.
|
|
|
Design of concrete elements with FRP reinforcement
Mrkvová, Kateřina ; Lagiň, Juraj (referee) ; Kostiha, Vojtěch (advisor)
This diploma thesis focuses on deflection of reinforced concrete structures with FRP rebar. The thesis presents and compares various approaches on deflection of reinforced concrete structures with steel and FRP rebar based on national and international standards and existing research. The aim of the thesis is to point out differences among the various approaches and present the most suitable one for the particular case. Based on theoretical and experimental results, the goal is to modify one of the existing approaches or present a new method which would correspond with real deflection behaviour of FRP reinforced concrete beam. Simply supported beam with three-point bending was selected as a reference element. Analytical study and numerical analyses by ATENA software are performed. Results of analytical and numerical study are compared to experimental results.
|
|
| |
|
|
Degradation of Tensile Load-Bearing Capacity of Molded Composite Reinforcement Due to Alkaline Environment
Lagiň, Juraj
The main reason for replacing the commonly used concrete reinforcement with composite reinforcement is its high resistance to aggressive environments. For direct reinforcement, this issue has been well described and investigated. In the case of shaped (bent) reinforcement, structural changes in the cross-section occur during the bending process, which can significantly affect its tensile capacity. The research work described in this paper was aimed at investigating changes in the tensile load-bearing capacity of bent glass fibre and epoxy matrix composite reinforcement. The reinforcement was placed in three types of baths, which simulates different environments or reinforcement ages. The paper describes the comparison of straight and bent reinforcement, comparison of calculation relationship, methods of reinforcement failure and variables affecting the resulting tensile load-bearing capacity of reinforcement. The research results confirm the high resistance of (straight) reinforcement to aggressive environments. A reduction in tensile strength was observed for the shaped (bent) reinforcement. The reduction rate for the most exposed specimen exceeded up to 33%, indicating that the calculation relationship according to the Japanese JSCE cannot be used to calculate the tensile load-bearing capacity of composite reinforcement exposed in aggressive alkaline environments.
|
|
|
Application of FRP reinforcement in the design of concrete structures
Kratochvílová, Barbora ; Lagiň, Juraj (referee) ; Girgle, František (advisor)
This bachelor thesis deals with two types of reinforcement FRP reinforcement and generally used steel reinforcement. The first part of this thesis is focused on theoretical knowledge related to FRP reinforcement. There is described its composition, properties, production, durability and its design properties from a theoretical point of view. In the following part, the design and assessment of a specific prefabricated U part is performed. The design and assessment is performed in two variants from FRP reinforcement and steel reinforcement.
|
|
|
Design of selected details of concrete structures with embedded FRP reinforcement
Lagiň, Juraj ; Matušíková, Anna (referee) ; Girgle, František (advisor)
The diploma thesis is devided into two levels. The Primary part of the thesis is the theoretical part, which is part of project „FV10588 – New generation of spatial prefab made from high-firm concrete with increased mechanical resistence and endurance“, realized in cooperation with Faculty of Civil Engineering at VUT university – Institute of concrete and masonry structures. The project deals with frame corners in the form of steel and composite reinforcement which will compared through experiments and various kind of calculate proceedings. The secondary part of thesis focuses on the static-design project of cooling reservoir, placed under the ground, while is stressed by temperature. The reinforcement of the construction is realized in two ways – steel and composite reinforcement with their effectivity compared.
|
guest ::
