|
|
House with a dentist office
Karásek, Petr ; Hofman, Petr (referee) ; Müller, Jan (advisor)
This thesis deals with the project documentation of a family house with a dentist surgery in Kuřim u Brna. It is a two-storey building with garage for one car and no basement. Ground plan of the building is L-shaped and it is covered with two shed roofs and one flat roof. The main entrance to the building is situated at the west, entrance to the surgery goes south. The object is mounted on flat terrain.
|
|
|
Apartment building, Přibyslav
Stejskalová, Michaela ; Hofman, Petr (referee) ; Müller, Jan (advisor)
The aim of the Bachelor´s thesis is the composition of project documentation for the construction building of apartment house in the village Přibyslav on Vysočina. The apartment house is four-storey building with basement. The building has 10 dwelling units. Apartment building is design from hollow bricks. The basement is design from concrete blocks. All building is heated up by contact thermal insulation from mineral whool. Floor structure is made from reinforced concrete slab. The last floor is made by prestressed concrete panels. The roof has 2 levels. First level of roof is flat and walkable, surface is made from grass carpet. Secend level of roof is not walkable.
|
|
|
Apartment building, Prievidza
Kyška, Roman ; Hofman, Petr (referee) ; Müller, Jan (advisor)
This bachelor thesis deals with the design of the apartment building. The building is located in a slightly sloping terrene in the cadastral area of Prievidza. The footprint of the building is mainly rectangular in shape with jumped parts of the facade. This is a udergroud object from the half part under the terrene with three above-ground floors. The apartment building has a total of seven apartments and a basement is used for commercial use in the hairdressing services. The remaining part consists mostly of storage and technical rooms. The KMB SENDWIX M structure is used as the construction of the perimeter walls, which consists of the main supporting structure made of sand-lime bricks and the thermal insulating layer of the contact insulation from the stone wool system. The ceiling construction is used from filigree ceiling panels and a single-skin flat roof with a 3% inclination is used to cover the building. The work contains project documentation for building realizations.
|
|
|
Analysis of influence of a roof construction on indoor thermal stability in summer season
Hofman, Petr ; Katunský,, Dušan (referee) ; Hirš, Jiří (referee) ; Mohelníková, Jitka (advisor)
The design of the building must respect the basic conditions for ensuring thermal comfort in the living space. The thermal comfort is influenced by several factors and one of them are the constructions of the building envelope. This work was focused on investigating influence of roof structures. The goal was to make analysis of influencing the selected modifications of the roof compositions to the thermal stability in the summer formed by experiments and detailed computer simulations. On the basis of these findings were defined suitable modifications. It has been worked out that the maximum indoor air temperature can be reduced by up to 1.5 °C in a suitable way. The cool roofs, thermal inertia and the ventilated air cavity layer have the greatest benefit. When evaluating the return on investment in a roof with high thermal inertia represented by a concrete layer of 100 mm, its return compared to a light roof and airconditioning is 12.1 years. The return on installation of external blinds on roof windows is 3.3 years compared to airconditioning.
|
|
|
Family home in Moravany u Brna
Moravec, Jakub ; Hofman, Petr (referee) ; Berková, Petra (advisor)
This bachelor´s thesis is a project of semidetached house for two generations of family. House is situated on periphery of Moravany.The building consists of two flats, between them is garage for two cars. Smaller flat is single-storey building, second one is storey and with cellar. Flats are connected conservatory, from here is entrance to garden. Struktural system is Porotherm. Semidetached house is roofed with flat roof, part of this is extensive green roof. Main entrances are in ground floor. Ground floor serves to staying during day. Here are kitchen, and living room. In smaller flat is also bedroom and bathroom. In bigger flat is cast-in-place reinforced concrete staircase. In cellar there are storages, workshop, laundry, utility room and workshop. From cellar is external staircase to garden. Second floor is designed for rest, here are bedrooms with bathrooms and entrance to terrace.
|
|
|
Detached family house, Havlíčkův Brod
Sedlák, Petr ; Hofman, Petr (referee) ; Müller, Jan (advisor)
This bachelor’s thesis deals with the project of a new detached house, which is situated in the cadaster area of the Down of Havlíčkův Brod. The building is a two-floor house without a cellar, with a detached garden tools storage and a carport for two cars. The building is designed for a four-member family. The perimeter constructions consist of clay blocks Heluz and are insulated with a contact thermal insulation system. The horizontal load-bearing construction consists of reinforced concrete prestressed hollow core slabs Spiroll. The house is roofed with a flat roof. The bachelor’s thesis has the form of a design documentation for the building process.
|
|
|
House in Letovice
Veverka, Jiří ; Hofman, Petr (referee) ; Müller, Jan (advisor)
This work deals with the design of a newly-built single-family house, which is located in the cadastral area of the town of Letovice. It is a two-floor house without a basement, which is designed for a family of five. The house is detached. The vertical loadbearing structures are lined with sand-lime block SENDWIX, insulated by contact thermal insulation system from polystyrene plates. The building is covered with a gable roof with a slope of 40° a gable dormer window on the south side and with an elongated part of the roof above the garage with a slope of 18°.
|
|
|
Detached family house, Velké Hoštice
Tomíček, Dominik ; Hofman, Petr (referee) ; Müller, Jan (advisor)
My bachelor thesis deals with designing and drafting a project documentation for a house construction. The object is located at the cadastral area of Velké Hoštice at a parcel no. 783/93. It is a standalone, two-story house without a cellar and with a flat roof and one parking spot in a mildly sloped terrain. Vertical load-bearing structures are constructed from sand-lime blocks Sendwix and insulated by contact thermal insulation system ETICS. Ceilings are designed as single monolithic slab. The house is designed for a four-member family. The project documentation is drafted in accordance with the current version of laws, ordinances and regulations.
|
|
|
House in Drahlov
Foltýnová, Kateřina ; Hofman, Petr (referee) ; Müller, Jan (advisor)
In this thesis I solve draft of new building of family house on the level of documentation for construction. The house is located on the outskirt of small village Drahlov. It is a wooden building without the basement which consist of one floor with detached garage for one car built on the area of 193,02 m2. The circuit structure consist of sandwich walls, the bearing element is a frame of KVH prisms inside the structure. The facade is ventilated with wood paneling, roofing material is metal. Internal layout is designed according to norm and users´ use.
|
|
|
House in Hrabová
Vinklerová, Martina ; Hofman, Petr (referee) ; Müller, Jan (advisor)
In my thesis I address the proposal family house on the level of documentation for construction. The site is on the sloping land, on the edge of village Hrabová. The site consists of T- shape with one storey and it is partly basement. Foundation are solved by basis strips made od plain concrete. Vertical constructions are made of mansory system LIAPOR. The floor structure above the 1st floor is made of precast floor slab LIAPOR, in different part of house is floor scructure made of timber glued laminated beams. The floor structures above the basement is made of reinforced concrete slab. The roof is warm flat roof. Project documentation is processed in computer program Archicad.
|
guest ::
RSS feed.