|
|
Positioning board for a pallet
Zábojník, Petr ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor's thesis deals with the design of static placement table for lifting loaded EUR palettes. Load capacity of the manipulator should be at least 1500 kg and lift height from the zero position at least 700 mm. Furthermore it should be possible to switch between electrical and hydraulic drive. This thesis consists of two parts, technical report and drawing documentation.
|
|
|
Lifting Unit for Formula Car
Havel, Jan ; Hejtmánek, Petr (referee) ; Blaťák, Ondřej (advisor)
In this thesis, the author deals with structural design of lifting unit for the formula car. First, he searches in the currently used solutions, followed by selection of appropriate accessories, a preliminary analytical calculation and stress analysis model. In the last part, there is made economic and weight balance.
|
|
|
Manipulator of fruit products
Riesner, Tomáš ; Veverka, Josef (referee) ; Kašpárek, Jaroslav (advisor)
The work deals with construction project of manipulator for loading of fruit products to a means of haulage (lorry semi-trailers, railway wagons). One part of the writnig is an idea concept of whole machinery and a detailed project of a lifting part with its strentght calculation. That was firstly worked out manually as a design and then subsequently optimalised by the Finite Element Method. Design documentation was made up based on the construction project and the calculated values.
|
|
|
Production technology of a lifting equipment for tractor cooler
Raiskup, Martin ; Fiala, Zdeněk (referee) ; Zemčík, Oskar (advisor)
The thesis focuses on production technology of the lifting equipment for a tractor cooler. This device is used in order to ease the installation of a cooler during the manufacturing of a tractor. In the first chapter, various types of the lifting equipment are described. In the following chapters manufacturing methods, machines and tools for the production of the specific component are described. Furthermore, materials and manufacturing processes for the complementation of the specific component are proposed. In the conclusion, the methods for the manufacturing are suggested, the timescale is calculated and the technical-economical evaluation is performed.
|
|
|
Tracked vehicle for transport of the pallets
Blažek, Martin ; Škopán, Miroslav (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis deals with the design of a remotely controlled tracked vehicle for the transport of pallets on unstable ground. The aim of the work is to make a short research of similar tracked transport machines and to design concept including choice of vehicle drive, design of pallet lifting equipment and strength calculations of sub-parts.
|
|
|
Custom design for lifting equipment
Matějíčková, Eva ; Chladil, Josef (referee) ; Kalivoda, Milan (advisor)
The aim of this thesis is to design and manufacture a lifting device to the Volkswagen Crafter long vehicle. In the first part, I present a simple descriptive overview of different lifting devices based on their principle and use. Next, commercially available alternative solutions to the given problem are shown and discussed. The main goals of the practical part are the design of the lifting device that fits to a carriage van according to given specifications and the description of the technological processes for the manufacturing of individual components of the device. The design includes selection of proper machines, measuring devices and working tools, which was carried out based on the available equipment. Finally, manufacturing, testing and evaluation are described and discussed together with the possibilities for future improvement.
|
|
|
Pillar jib crane
Martinka, Tomáš ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deals with the design of an alternative atypical construction of a column crane including important strength calculations according to specified parameters: arm extension length 4000 mm, lift height 8500 mm, load capacity 2000 kg. Part of this work is also elaboration of technical report with analysis of construction, selection of suitable hoist with important calculations. Further draw a construction drawing of the column crane assembly according to the entered parameters and a detailed drawing of the column.
|
|
|
Handling equipment for a motorcycle
Šoulák, Vojtěch ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis deals with the design of handling equipment for a motorcycle, according to the specified parameters. The search section, containing information about handling devices. Furthermore, the design and calculation of the construction of the lifting mechanism, hydraulic circuit and drive of the whole device are processed in this work. The content of the work is also the drawing documentation of the equipment.
|
|
|
Production technology of a lifting equipment for tractor cooler
Raiskup, Martin ; Fiala, Zdeněk (referee) ; Zemčík, Oskar (advisor)
The thesis focuses on production technology of the lifting equipment for a tractor cooler. This device is used in order to ease the installation of a cooler during the manufacturing of a tractor. In the first chapter, various types of the lifting equipment are described. In the following chapters manufacturing methods, machines and tools for the production of the specific component are described. Furthermore, materials and manufacturing processes for the complementation of the specific component are proposed. In the conclusion, the methods for the manufacturing are suggested, the timescale is calculated and the technical-economical evaluation is performed.
|
|
|
Positioning board for a pallet
Zábojník, Petr ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor's thesis deals with the design of static placement table for lifting loaded EUR palettes. Load capacity of the manipulator should be at least 1500 kg and lift height from the zero position at least 700 mm. Furthermore it should be possible to switch between electrical and hydraulic drive. This thesis consists of two parts, technical report and drawing documentation.
|
guest ::
