|
|
Energy-saving family house in Šumice
Jurák, Štěpán ; Rubinová, Olga (referee) ; Počinková, Marcela (advisor)
The aim of the bachelor's thesis is to design a energy-saving detached house located on the outskirts in the village of Šumice, located of Uherské Hradiště district. The house consists of two floors, with a second-floor step-in terrace, a flat sedum roof on the top, and a one-car garage. The main entrance is facing the northwest. The social area of the house is on the first floor, including a dressing room, a utility room, a bathroom, a toilet, a study room, and a living room that is connected to the kitchen and dining room. The quiet zone is on the second floor, consisting of two children's rooms, a master bedroom with a walk-in closet, a bathroom, a toilet, and a small storage room. The house is based on concrete foundation strips. The vertical load-bearing structures are designed from ceramic blocks with thermal insulation. Horizontal load-bearing structures are reinforced concrete slabs. The building is heated by the air-water heat pump. The main heating system is a floor heating system combined with radiators and towel radiators. The utility room is designed with mechanical ventilation with a heat recovery unit. Exhaust and intake are located on the north facade. Fresh air is supplied in living rooms and exhaust air suction in the garage, bathrooms, and walk-in closet. The building is connected to the water mains and the combined sewer. In the heat pump is installed a hot water cylinder. Stormwater accumulated in the tank then used for toilet flushing and watering the garden.
|
|
|
Single-family house in Hodonín
Zemánek, Jan ; Jechová, Marie (referee) ; Ostrý, Milan (advisor)
The goal of my bachelor’s thesis is to design a nZEB house for family of four. It is located on the edge of town Hodonín. The house has two floors with a one floor garage attached to the side. The first floor contains utility room, some storage area, kitchen to the north that is connected with living room and dining room facing south. The second floor than has two bedrooms facing south-east, study and master bedroom facing north-east and bathroom facing northwest. The roof of the house is flat with surface form waterproof membrane. Roof of garage is extensive green roof. The foundations of the building are reinforced concrete strips. Load bearing walls are masonry designed from sand-lime blocks with external mineral wool insulation. Horizontal load bearing structures will be made from reinforced cast on site concrete. Partition walls are planned to be from plasterboard. The main source of heat for the house will be air to water heat pump with performance of 8,02 kW and inbuilt electric insert to get temperature needed for floor heating. For hot water there will be separate hot water cylinder with volume 208 l and inbuilt electric insert. The ventilation system will be MVHR with air exchange of 310 m3/h and bypass system. The internal sewage system will be connected to the city sewer, while rainwater will be collected, used for watering garden, or infiltrated into the soil. For cooling external shutters will be enough.
|
|
|
Single-family house in Nový Jičín
Holiš, Jakub ; Sukop, Lukáš (referee) ; Ostrý, Milan (advisor)
Purpose of the bachelor´s thesis is to design single-family low energy house. House is located in Nový Jičín, a town located in Moravian-Silesian region. Building has two floors and detached garage. Both garage and house have a flat roof. Main entrance is located between garage and house itself. On one part of the first floor there is a big open living room with kitchen and dining area. Second part of the first floor has bathroom, separated toilet, hall, entry, and utility room. Second floor has two bedrooms and master bedroom. Another bathroom, study and walk in closets are also present here. Vertical load bearing structures are made of sand-lime bricks. Horizontal load bearing structures and staircase are made from reinforced concrete. Windows are wooden with aluminium exterior. Heating of the house and hot water will be secured by air-water heat pump in split mode. Hot water for heating will be stored in accumulation tank and distributed throughout the house thanks to the floor heating system. There is mechanical ventilation and heat recovery unit installed. House Is connected to public drinking water infrastructure and city sewerage system. Electricity is provided by the grid. Rainwater is stored in underground accumulation tank with connection to underground drainage system.
|
|
| |
|
|
Sanitation installation and gas installation in restaurant
Doubalová, Aneta ; Vaščáková, Alena (referee) ; Vrána, Jakub (advisor)
This bachelor thesis deals with health-technical and gas piping in the restauration. The topic grease trap is the theoretical part where the usage of function, principals, benefits, construction, installation. The computational and project part deals with sewerage, water and gas distribution system in this two floors part-cellar restauration. This bachelor thesis is written according to Czech and European regulations.
|
|
|
Building for Living – Plumbing Systems
Opatřilová, Jana ; Vrána, Jakub (referee) ; Bárta, Ladislav (advisor)
The bachelor thesis is dealing with correct design of plumbing systems, especially local preparation of water. The first part of thesis describes theoretical part, which is focused on options of local preparation of water in buildings. The sekond part of bachelor thesis is focused correct design of plumbing systems in building for living. The calculations, dimensioning and graphical representation are included of a design. The result of a practical part are calculation`s and graphical`s expression of correct design plumbing`s systems in specific apartment building.
|
|
|
Sanitary technical installations and gas pipeline in the apartment building
Růžičková, Eliška ; Vrána, Jakub (referee) ; Vaščáková, Alena (advisor)
This bachelor's thesis deals with the design of sanitary and gas installations in an apartment building in Brno and its connection to existing utilities. It is an apartment building with four floors above ground and one underground floor. There are four apartments on each floor. The theoretical part focuses on the history of hygienic fixtures. It decribes both the present and the time when people had no idea about furnishing items. The computational part deals with the distribution of rainwater and sewage, water and gas and its connection to public networks.
|
|
|
Sanitation installations in a high building
Slaninová, Anna ; Bárta, Ladislav (referee) ; Vrána, Jakub (advisor)
My final thesis "Health technical installations in high-rise building" is developed in the form of a project presentation containing all requirements according to applicable regulations for presenting a building construction plan. The design documents a tall building with twenty floors above ground with 3 underground floors handled by distribution of plumbing, and water system, including drainage systems. This property consists of underground garages, offices, restaurants and apartments. Documentation includes projects of connections - water, sewer, individual floor plans, sections, and axonometric diagrams. The thesis is developed by including specialty architectural design and includes the seminar work “Drinking water supply for high-rise building.”
|
|
| |
|
|
Sanitation installation at school
Moštěk, Jan ; Vaščáková, Alena (referee) ; Vrána, Jakub (advisor)
This diploma thesis is focused on the sanitary technical installations for the specified building of the elementary school and the sports hall, which will be implemented as new buildings on the land in the part of Brno-Bystrc. In the theoretical part I deal with the use of precipitation water from roofs. In the calculation and design part I deal with sewage, rainwater and water distribution. The given elementary school has a 3rd floor and is connected by a connecting corridor to the sports hall, which has a 2nd floor. In the present work is also proposed the 2 variant of the water distribution system without the use of rain water.
|
guest ::
