|
|
Design and analysis of reinforced concrete or masonry structures
Skočdopole, Jakub ; Švaříčková, Ivana (referee) ; Požár, Michal (advisor)
The bachelor's thesis deals with the static solution of the reinforced concrete ceiling slab and the inclined column of a 2-storey multi-storey building. The first part is devoted to the design of a point-supported plate, a cross-reinforced plate and an inclined column inclined by 15° from the vertical structure according to the limit state method. A spatial 3D model was created in the SCIA Engineer program, which was used to determine the internal forces in the structure. The correctness of the model results was verified by the sum of moments method. The second part deals with the study of the influence of the slope of the columns on the structure, when one row of columns in the 2nd floor was inclined and then the effect of this change on the structure and the static assessment were compared. Reference slopes chosen for the study: 0°; 15°; 30°; 50°, a partial spatial 3D model of the structure was created for each variant. The appendix of the bachelor's thesis is a detailed static calculation according to valid ČSN EN standards, drawing documentation and a study of the influence of the inclination of one row of columns on the reinforced concrete structure.
|
|
|
Structural design of the industrial building for increased loads
Landa, Tomáš ; Olšák, Martin (referee) ; Klusáček, Ladislav (advisor)
The bachelor thesis deals with the design of a ceiling structure for a load of 15 kN/m2. The design was prepared on the basis of the submitted documents. A preliminary design of the structure and its elements was developed for the given problem. The structural analysis was performed in SCIA Engeneer software system (including manual control by simplified method). The result of this bachelor thesis is a static calculation and design documentation of the designed structures.
|
|
|
Apartment Building - Design of Selected Reinforced Concrete Elements
Jakoubek, Lukáš ; Horák, David (referee) ; Švaříčková, Ivana (advisor)
The bachelor thesis is focused on the continuous static solutions of monolithic reinforced concrete ceiling construction and the three-flight staircase in the five-storied apartment house. The entire structure is designed from concrete. To determine the effects of internal forces used computational design of Scia Engineer 2013.1. Assessment of the elements is performed by the first limit state. Work includes developing a static calculation, design reinforcement drawings, shapes and reinforcement drawings solved elements.
|
|
|
Reinforced concrete structure
Tesař, David ; Kraut, Jan (referee) ; Šulák, Pavel (advisor)
The aim of the master‘s thesis is static and structural design of polyfunctional house. The load will be determined according to ČSN EN 1990. The finite element method will be used for the calculation of internal forces. The design will be dimensioned according to ČSN EN 1992. Text part, static calculation and shape and reinforcement drawings will form the output of this work.
|
|
|
Reinforced concrete structure
Hubačková, Pavlína ; Jeneš, Rostislav (referee) ; Šulák, Pavel (advisor)
My bachelor thesis focuses on the design of selected parts of monolithic reinforced concrete structures of a department store. Elements for design are locally supported ceiling sab, column and foundation pad. The calculation of internal forces was performed in a computational program SCIA Engineer 17. The Results of the software are compared with the result of the simplified manual method. The settlement of foundation was performer in program GEO 5. A graphical documentation of selected elements is also a part of the thesis. The construction is designed and assessed according to ČSN EN 1992 - 1 - 1.
|
|
|
Concrete ribbed slab
Dvořák, Vít ; Perla, Jan (referee) ; Strnad, Jiří (advisor)
The bachelor thesis deals with a design of monolithic reinforced concrete, line supported and cross reinforced slab and a design of supporting reinforced concrete ribs. The plan of the slabs is rectangular and one time bent. The content bachelor thesis is calculation and design of reinforcement of slab and ribs. For the calculation was used software Scia Engineer 14 and was checked by manually calculation. The slab is located in the first floor of polyfunctional house. Other parts of the object are not covered by the thesis.
|
|
|
The Roofing of The Ecclesiastical Building
Lecián, Martin ; Hron, Lukáš (referee) ; Buchta, Stanislav (advisor)
Bachelor's thesis deals with wooden loadbearing structure the roofing of the ecclesiastical building with dimensions 15,5 x 17,5 meters in the village Chudcice northwest of Brno. The building is 16 meters high and the roof is 12 meters high. The main loadbearing roofing structure consists of corner rafters reinforced wood frame, here is placed joist floor of loft. The main beams are designed from glued laminated wood GL24, other supporting beams are designed from wood C22. The roof of the chapel is formed by intersection of two pyramidal roof and it is at an angle of 62°. Roof cladding is made of asphalt shingle. Bell stool with a bell is in the top of the roof. Technical equipment ensuring automatic chime is located in the loft. Connections of wooden beams are designed with steel joints.
|
|
|
Analysis of structure using stages calculation
Čejková, Eva ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
Bachelor thesis deals with the roof structure, its static assessment and analysis phases of construction. It is a roofing tennis hall parabolic trusses, which are formed from steel. In the hall there are three tennis courts and space for an auditorium for spectators. The entire structure and calculations are processed in a static software RFEM by the Dlubal. Only the load cases are calculated manually.
|
|
| |
|
|
Optimization of parameters of dynamic relaxation in solving plastic limit states of structures
Poláček, Milan ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
The aim of the thesis is to create an analytical model of frame construction. Determining load at which individual plastic hinges are formed until the collapse of the structure. The analysis is going to be performed by RFEM with an additional module RFDYNAM. Subsequently, the parameters of dynamic relaxation is going to be optimized to specify and speed up the calculations. Finally, the optimized parameters is going to be used to analyze the storeyed frame construction formed Ing. Jan Vales including a comparison of findings.
|
guest ::
