|
|
Process control of a distillery
Sejkora, Martin ; Kopečný, Lukáš (referee) ; Veselý, Libor (advisor)
This master‘s thesis deals with the design of a control system for a distillation column. It deals with the issue of distillate production and acquaints the reader with the necessary knowledge that is necessary to understand the purpose of the work. The practical part of the work presents a specific distillation column, the means for its control and the method of implementation of the control system, then the visualization of the control system and the method of control. Part of the work is the evaluation of the results and benefits of the work.
|
|
|
Dedicated machine for forming of jerrican spouts
Podolan, Luděk ; Ing.Pavel Cícha, Evropský polytechnický institut, Kunovice (referee) ; Novák, Vítězslav (advisor)
The aim of this diploma thesis is detail description of theory, design process and final realization of single-purpose machine for pressing canister funnels. Theoretical section of this work covers manufacturing standards of the electrical cabinets, options for the single-purpose machine control with focus on the programmable logic controller e.g. PLC, PLC control program concept with definition of the main alarm states and description of two types of electrical cabinet. Practical part contains description of the electrical cabinet, its block diagram, photo documentation of the wiring (chapter 4.), chosen PLC type, its advantages and detail program description using Ladder diagram notation, communication with operator realized with touch LCD panel, programming environment for this LCD panel and program realization process. Finalized machine description and its photo documentation in manufacturing process is covered in the end. This diploma thesis is based and extends previously successfully defended semester project.
|
|
|
Software Defined Home Automation
Stupka, Dominik ; Brejl,, Milan (referee) ; Povalač, Aleš (advisor)
This thesis is about development and construction of systems for building automation. At the beginning it´s focused on usage of building automation. Short describe used topology of installation and available systems on the market. The second chapter is about designing of hardware’s elements systems. Then it’s describing control unit Raspberry Pi 3, microprocessors for communication and slave modules. For my thesis I am also engaged in interface communication and designing of I/O systems. The third and fourth chapter is describing software equipment’s of the system. The parts of microprocessor firmware and manner of control logic creating and visualization in control unit module are described in details. Last chapter contains the description of construction of testing module and measuring of system parameters.
|
|
|
Tic-tac-toe game by 2D manipulator
Maléř, Martin ; Stibor, Karel (referee) ; Štohl, Radek (advisor)
This master’s thesis deals with the renewal of electrical equipment of 2D manipulator and putting it into operation. It contains a description of the machine, used components and their connections. It describes the principle of two communication buses, which are used for machine control. Next part is devoted to the safety analysis of the machine. Following chapters describe developing of a control program and designing of a visualization.
|
|
|
Model of small air press
Uherek, Vítězslav ; Macho, Tomáš (referee) ; Štohl, Radek (advisor)
This thesis deals with design construction of laboratory model of air press and also proposes of safety measures for this machine. Before the design itself, norms concerning machinery construction were surveyed. There are two norms mentioned in the text ČSN EN 61 508 and ČSN EN ISO 13489-1. Next part shows practical demonstration of machine safety analysis using SISTEMA software tool. Changes to the safety measures were made according to the result of this analysis. Important part of this thesis is also design of control software for the air press in RSlogix5000 environment using Ladder logic and also created visualization of pressing process and show up on to visualization panel PanelView 700.
|
|
|
Bridge over highway on a ramp
Tlamka, Tomáš ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
The proposal is for new construction of a road bridge over the highway.Three options of solutions were proposed but only the option of connected girder slab beam of six fields was selected. This variant was assessed by static calculation. Static calculation is processed in accordance with European standards. Another important part of this thesis is also drawings, visualization, technical report and construction procedure.
|
|
|
Distributed control system for function of laboratory hydraulic model.
Janda, Tomáš ; Weber, Martin (referee) ; Pásek, Jan (advisor)
In the first part of this bachelor´s thesis are introduction common information about distributed control systems above all with a view to on their communications systems.The second part is devoted to hardware machines. There is described their functionalist and resulting configuration.The third part describes creation of software for operative PLC and it presents results of system in this period of progression. The next part inform at first about creation of visualization for existend system and afterwards describes its functionality. At the close there are summarized results of realized distributed control system.
|
|
|
Finding the network architecture for alarm transmission system LAN-RING
Mikšíček, Pavel ; Marada, Tomáš (referee) ; Zuth, Daniel (advisor)
This master’s thesis deals with a complex solution for the visualization of network topology. The first part of thesis describes the operation principle of LLDP protocol, which was chosen as a tool for retrieving informations from network traffic based on the requirement of the assignment. There is a detailed description of the LLDP protocol implementation in C language to METEL s.r.o. network products. The second part deals with possibilities of graphical interface in software SIMULand intended for managing network devices. It describes tools expansion process for the visualization of the network topology. In conclusion, the results of testing final solution are introduced.
|
|
|
Visualization of air jet from ventilation outlet of a passenger car dashboard
Bečica, Radek ; Bělka, Miloslav (referee) ; Lízal, František (advisor)
Goal of this master´s thesis is to experimentally analyse air jet from ventilation outlet of a passenger car dashboard using smoke visualization and to describe this air jet. Air flow was set at 30 m3/h according to requirements from Škoda Auto s.r.o. from previous experiments on a similar ventilation outlet. First type of measuring rig which was developed for previous experiments was disassembled and replaced with a new modern measuring rig which is supposed to be used for next visualizations and experiments. Visualization was performed using smoke method and laser light plane. Air jet was photographed for five defined ventilation outlet adjustments and that for a jet to free space and for a jet flowing along a wall. The wall represented a front left door of a car. Results were processed by computer and presented as pictures and tables. Resulting angles were transformed to the main coordinate system of a car. Ventilation outlet functionality with respect to the air distribution in a car was evaluated afterwards.
|
|
|
Depth map visualization using the Kinect sensor
Gajdoš, Adam ; Najman, Jan (referee) ; Appel, Martin (advisor)
The theoretical part of bachelor thesis is focused on possibilities of use the depth device Microsoft Kinect in various spheres and branches of industry. The practical part deals with the processing of data from Kinect depth sensor, programming and creating visualizations in the Matlab programming environment for use in the field of education.
|
guest ::
