|
|
Advanced methods of surface topography evaluation
Toman, Ladislav ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
This paper deals with the description of the surface texture measurement methods, describes the devices by which the surface texture can be recorded and describes the parameters that allow the surface texture to be quantified. The practical part deals with the evaluation and comparison of the parameters of metric threads M10 made by cutting and forming by analysis of their cross-sections, then the attention is focused on the analysis of pressure forces and torques which occur during the manufacture and in the last part of the thesis there is an economic evaluation of the cost of manufacturing one piece of cut thread.
|
|
|
Substituting circuit of an induction machine
Běloušek, Radim ; Cipín, Radoslav (referee) ; Patočka, Miroslav (advisor)
Although induction motors are the simplest and most working reliability machines, is the identification of the parameters of their substituting circuit very difficult. There is solved the identification of the parameters of the substituting circuit in the T-network and ? –network in this work. The work also includes the proposal of magnetic circuit of the induction motor, the calculation of magnetizing and leakage inductances and resistances of the machine. The conclusion of the work is devoted to the sensitivity analysis of current and torque characteristics of induction motor upon the change of the single parameters of the substituting circuit.
|
|
|
Measurement and analysis of dynamic properties of rotating machine parts
Gofroň, Vojtěch ; Hadaš, Zdeněk (referee) ; Houška, Pavel (advisor)
Diploma thesis focuses on measurement and analysis of shaft motion, torque, angular velocity and vibration. First part of the thesis deals with general issue of acquiring a digital signal. Next part describes suitable sensors for each measurement type, and data acquisition hardware. The last theoretical part describes methods for measurement data analysis and vibration diagnostics. Practical part of the thesis describes shaft motion and torque measurements made on laboratory equipment, and vibration measurement made on real machine system. Each measurement includes measurement data analysis and evaluation.
|
|
|
Design Solutions and Development Trends of Formula Student Cars
Adámek, Ladislav ; Porteš, Petr (referee) ; Ramík, Pavel (advisor)
This bachelor´s thesis is engaged in history and description of progress and recent trends in Formula Student/SAE competition. The bigger part of this thesis is devoted to complex summary of structural designes of monoposts and construction units of most succesfull teams. The point of this survey was getting information about construction of competitor´s cars. Theese informations should be used for building own car.
|
|
|
Parameters identification of the asynchronous machine substituting circuit
Běloušek, Radim ; Cipín, Radoslav (referee) ; Patočka, Miroslav (advisor)
Mathematical model and substituting circuit both include several parameters, which is important to determine for a control. This work is target on identification of parameters of substitute circuit of the asynchronous machine in -network form. The work is divided into several main units. In the first of them are shown the methods of identification of asynchronous machine on the selected machine. The measuring of torque characteristic by classical way with dynamometer and by dynamically with fly-wheels is shown in the next part of this work. The final part of this work is devoted to interpretation and comparison of achieved results.
|
|
|
Design of permanent magnet synchronous motor
Pavláček, Jan ; Vítek, Ondřej (referee) ; Huzlík, Rostislav (advisor)
This thesis is bent proposal synchronic motor with permanent magnets. Here are described characteristic synchronic motors, permanent magnets and possibilites construction. This thesis is sorted from common description, feature and principle function. Here are also mentioned benefits and disadvantages synchronic motors with permanent magnets. Main volume of work is proposal synchronic motor with various modifications. Proposal is realized in program Ansys Maxwell (modulus RMxpert). Engine data are entered from program Excel, where is state full calculation input and output parameters. Value is tested from [11]. Aim those work are various modification synchronic motor and his analysis.
|
|
|
Powertrains of Octavia vehicles
Pavličík, Lukáš ; Vopařil, Jan (referee) ; Píštěk, Václav (advisor)
This Bachelor thesis describes powertrains of Škoda Octavia vehicles, which have used from the beginning of production of this car until today. It has two main parts. First chapter focuses on the power unit. Each one is briefly described. In second chapter are described all mechanical and automatic transmissions.
|
|
| |
|
|
Change in the Production of oversize Components of the Pump
Kratochvíl, Zdeněk ; Prokop, Jaroslav (referee) ; Kalivoda, Milan (advisor)
The thesis proposes a method for implementing structural changes on the compression flange of the main circulation pump, at the time of its overhaul during the unit outage. This structural modification consists in Annular groove of the groove to a diameter of about 850 mm. It is necessary to choose a suitably radius of maximum made possible smoothly rounded grooves without notches to reduce the stress of the concentration at the corners of the groove. Possibilities for making this adjustment are considered in this thesis and then the technology is selected with control torque calculations. The selected technology consists in the sizing of grooves with the mobile numerically controlled machining lathe EFCO TDF-2 NC, which is documented in the Annular groove of the axial grooves. In conclusion there are described other possibilities of using of this mobile machine in the primary circuit of a nuclear power plant.
|
|
|
Tyre Mathematical Models
Rubíček, Pavel ; Blaťák, Ondřej (referee) ; Hejtmánek, Petr (advisor)
Today the tire is an integral part of the vehicle. During its development is used in various methods. This publication deals with some of them. In her research is necessary to know its features and design solutions. Basic tire structure is described in the first part. These findings are then fit to the other chapters. In the second part there are examples of several tire models in the form of mathematical equations. These equations are used to determine the force and moment loads acting on the tire. The resulting load may aid in the design of new types of tires. The last part describes how to use mathematical models to calculate and here are other methods how else can it gets information about the load on the tire. There is a list of organizations that deal with simulations and tests.
|
guest ::
