|
|
Audio pre-amplifier for two satellites and subwoofer
Štaud, Stanislav ; Brančík, Lubomír (referee) ; Kratochvíl, Tomáš (advisor)
The aim of this thesis was to design, simulate and construction audio pre-amplifier for two satellites and subwoofer and monolithic amplifier for subwoofer in the class AB. Audio pre-amplifier provides bass, treble and switch loudness volume control. It includes subsonic filter and active crossovers Sallen-Key with approximation Linkwitz-Riley. There are low noise operating amplifiers LM833 and TL081 at the place of active amplifiers with very low distortion. End-amplifier can delivers power 50 W to 4 ohms. Of consists delayed switch speaker and supports security against direct voltage on the output of amplifier.
|
|
|
Analysis of Spectra of Electric Guitars Made of Various Materials
Zezulová, Eliška ; Musil, Jaroslav (referee) ; Jirásek, Ondřej (advisor)
Bachelor‘s thesis focuses on the spectral analysis of two electric guitars. The Cort X-6 electric guitar is used for harder genres of music. The second Fokus-H Strat guitar is more of a rock-universal type of instrument. The work deals with the spectrums of tones using various guitar pickups and analyzes them with the use of psychoacoustic measurements in the perception of timbre. It examines variations in the sound spectrum when there’s a manipulation with tone and gain controls. The measured values of the tone control are divided into thirds of the potentiometer range. The volume has been halved. The following is a look at the change of sound spectrum when using a harder plectrum. The end of the work is devoted to the difference in colors of two tones that were recorded under the same conditions. Their difference lies in the way of holding the neck of an electric guitar.
|
|
|
Design of Input Stage for Bi-Amp Loudspeaker System
Ryšavý, Jindřich ; Hanák, Pavel (referee) ; Schimmel, Jiří (advisor)
The thesis discuss the desing of active crossover for loudspeaker systems. There are described two most common topologies forming active filters and their comparison. Also is there shown way how to desing transfer functions to achieve flat overall transmission, then computing components bases on topology. All that is shown on example. Then are discussed different ways how to correctly receive analog or digital sound signal and handle with them. Example desing is then shown.
|
|
|
Miniature stereoamplifier
Dokulil, Zdeněk ; Mišurec, Jiří (referee) ; Káňa, Ladislav (advisor)
The aim of this thesis was to design and construct a mains powered stereo power amplifier with minimal overall dimensions, equipped with a mute and tone/volume control circuit. The usage of an integrated power amplifier circuit was required. The circuit solution is based on a DC controlled integrated tone and volume control circuit LM1036, power amplifier TDA7262 and a number of supporting circuits for mute switching and temperature protection. An assembled sample of amplifier has 2 x 20 watts of output power, SNR 83,7 dB and a flat frequency response within the range of 3 dB for inputs from 16 to 20 000 Hz.
|
|
|
Class D stereo audio power amplifier
Kazelle, Kamil ; Dostál, Tomáš (referee) ; Brančík, Lubomír (advisor)
The content of this project is design of stereo audio amlifier working in class D with output power 2x20W. Project includes also a design of preamplifier and power supply. This project is divided into the four parts. In first part the theory and problems of amplifiers working in class D is resumed, in the second the designed circuits are dicussed, in the third the results of simulations in the program PSpice are presented and the last part of project describes the realization and presents the results of measurements.
|
|
|
Analysis of Spectra of Electric Guitars Made of Various Materials
Zezulová, Eliška ; Musil, Jaroslav (referee) ; Jirásek, Ondřej (advisor)
Bachelor‘s thesis focuses on the spectral analysis of two electric guitars. The Cort X-6 electric guitar is used for harder genres of music. The second Fokus-H Strat guitar is more of a rock-universal type of instrument. The work deals with the spectrums of tones using various guitar pickups and analyzes them with the use of psychoacoustic measurements in the perception of timbre. It examines variations in the sound spectrum when there’s a manipulation with tone and gain controls. The measured values of the tone control are divided into thirds of the potentiometer range. The volume has been halved. The following is a look at the change of sound spectrum when using a harder plectrum. The end of the work is devoted to the difference in colors of two tones that were recorded under the same conditions. Their difference lies in the way of holding the neck of an electric guitar.
|
|
|
Design of Input Stage for Bi-Amp Loudspeaker System
Ryšavý, Jindřich ; Hanák, Pavel (referee) ; Schimmel, Jiří (advisor)
The thesis discuss the desing of active crossover for loudspeaker systems. There are described two most common topologies forming active filters and their comparison. Also is there shown way how to desing transfer functions to achieve flat overall transmission, then computing components bases on topology. All that is shown on example. Then are discussed different ways how to correctly receive analog or digital sound signal and handle with them. Example desing is then shown.
|
|
|
Class D stereo audio power amplifier
Kazelle, Kamil ; Dostál, Tomáš (referee) ; Brančík, Lubomír (advisor)
The content of this project is design of stereo audio amlifier working in class D with output power 2x20W. Project includes also a design of preamplifier and power supply. This project is divided into the four parts. In first part the theory and problems of amplifiers working in class D is resumed, in the second the designed circuits are dicussed, in the third the results of simulations in the program PSpice are presented and the last part of project describes the realization and presents the results of measurements.
|
|
|
Audio pre-amplifier for two satellites and subwoofer
Štaud, Stanislav ; Brančík, Lubomír (referee) ; Kratochvíl, Tomáš (advisor)
The aim of this thesis was to design, simulate and construction audio pre-amplifier for two satellites and subwoofer and monolithic amplifier for subwoofer in the class AB. Audio pre-amplifier provides bass, treble and switch loudness volume control. It includes subsonic filter and active crossovers Sallen-Key with approximation Linkwitz-Riley. There are low noise operating amplifiers LM833 and TL081 at the place of active amplifiers with very low distortion. End-amplifier can delivers power 50 W to 4 ohms. Of consists delayed switch speaker and supports security against direct voltage on the output of amplifier.
|
|
|
Miniature stereoamplifier
Dokulil, Zdeněk ; Mišurec, Jiří (referee) ; Káňa, Ladislav (advisor)
The aim of this thesis was to design and construct a mains powered stereo power amplifier with minimal overall dimensions, equipped with a mute and tone/volume control circuit. The usage of an integrated power amplifier circuit was required. The circuit solution is based on a DC controlled integrated tone and volume control circuit LM1036, power amplifier TDA7262 and a number of supporting circuits for mute switching and temperature protection. An assembled sample of amplifier has 2 x 20 watts of output power, SNR 83,7 dB and a flat frequency response within the range of 3 dB for inputs from 16 to 20 000 Hz.
|
guest ::
