|
|
Creation of Knowledge Database for Lighting Technology with the Possibility of Expert Query Processing
Krbal, Michal ; Sokanský, Karel (referee) ; Gašparovský, Dionýz (referee) ; Baxant, Petr (advisor)
This presented thesis is focused on the complex description of creation the database system for the lighting. The important static and dynamic parameters of light sources and luminaires are listed in the first part of thesis. These parameters are complemented by the measured values and their relationships. The next chapters of thesis are focused to description of obtained parameters, structural design, historical and expected development of individual representatives of light sources. In the following sections are described current state of used data formats of luminaires and the possibilities for describing of light sources. The database systems are created as a result of this thesis. These databases are used for collecting, sorting, searching and sophisticate comparison of the parameters of light sources and luminaires.
|
|
|
Energy Optimization and Operation of Public Lighting
Houdek, Michal ; Škoda, Jan (referee) ; Baxant, Petr (advisor)
An objektive of this university graduation work is an essay about any possibilities for energy savings with operation optimalization of public lightings. Understandings and introduction operation problems of public lighting is devote in first part of this work. Here we can chapters as Importance of public lightings or Gulations and norms in ralation to public lightings. The bigist and special attention is concentrated to description to public lightings systems and it is basic components. Another main part of this work is demonstration of used systems that are leading to energy savings for public lightings. These problems are detailed and explained in chapter Regulation of public lighting systems. This graduation work is describing individual types of regulation with the systems that are used with these regulatios in systems of public lightings. The assignment of last part of graduation work was to make sample calculation of energy demand and calculatin of yearly consumption on exemplary temporary system of public lightings. For this occasion was extra special auxiliary application sytem set up inside the Microsoft Excel program where all individual calculations were done.
|
|
|
LED technology for Lighting Plants
Pospíšil, Tomáš ; Pavelka, Tomáš (referee) ; Krbal, Michal (advisor)
The aim of the work is to describe the physiology of plants and their needs to the successful evolution and growth. Furthermore to introduce a characteristic light requirement of plants and summarize differences between light requirements of the human eye and plants. More there are shortly mentioned the light quantities and units and by means of these quantities and their units there is assessed the appropriateness of lighting for plants. Another aim is to describe the electric and lighting-technical LED parameters that are suitable for use as a lamp designed for illumination of plants, outline the basic requirements that should the lamp designed for illuminating the plants fulfill. The last part is devoted to the presentation and evaluation of the measurement results of the lamp, which was already developed and used on prototype light source using LED.
|
|
|
The Lighting of Liturgic Space
Jedličková, Veronika ; Přikryl, Miroslav (referee) ; Zdařil, Zdeněk (advisor)
The bachelor thesis deals with the lighting of aisles, chapel and space under the chior in St. John the Baptist’s church in Frýdek-Místek. The thesis has two parts. The first part focuses on whole concept of lighting, also location of lighting fixtures and its impact on the overall space effect. The second part is the design of the luminaire, respecting the specifics of the space. The luminaire is also trying to satisfy the lighting requirements established by the local parish council.
|
|
|
Electrical installations in apartment building
Novotný, Jan ; Formánek, Marian (referee) ; Doležalová, Jana (advisor)
This bachelor's thesis deals with electrical wiring in apartment building. The aim is to describe the types of distribution networks, implementation possibilities of service lines, describe the individual parts of the wiring in the building and the principles of their implementation. Further describe basic electrical materials and to explain the design of artificial lighting. In the practical part the information applied to a particular apartment building, together with the calculation of the estimated annual energy consumption of flats. For the apartment building project is created in the form of engineering report and drawings.
|
|
|
Photometry and spectroradiometry of LEDs
Vysoudil, Martin ; Škoda, Jan (referee) ; Drápela, Jiří (advisor)
This thesis deals with the processing of light technical parameters and performance of key LED chips for their applications in lighting systems. The aim is to create a laboratory model for measuring the qualitative and quantitative parameters of highly luminous light LED emitted depending on the angle, using a spherical integrator 0.3 m, goniometer and fiber spektroradiometr /luxmeters. Goniometer is designed using modular optomechanical parts company Thorlabs. Due to the current passing through the LED chips heat up considerably. To light LED chip parameters tested were not affected by heat from the chip is required to pay the heat generated by a passive radiator. Another part of this thesis is the reconstruction of an older model spherical integrator. Reconstruction must be undertaken so as to ensure sufficient cooling again tested LEDs. Light scattered in the ball of the integrator is led by the optical cable to the spektroradiometr that are subsequently recorded its parameters. The second element used to measure the light produced by the LED source is photocell. Spherical integrator must be appropriately modified to indicate the two measuring elements and also meet the standards of determining the correctness of measurement. At the end of the measurement results will be compared with catalog values provided by the manufacturer.
|
|
|
Electronic skylight
Coufal, Martin ; Šteffan, Pavel (referee) ; Boušek, Jaroslav (advisor)
Theoretical part of this thesis describes LEDs and other circuitry used for LED light design. LED light is designed, manufactured and put into operation. This thesis examines possibilities of measuring exterior light and its key parameters. The device uses two sets of LEDs – warm white and cold white to create light with parameters dependent on exterior light. LEDs are driven by constant current sources that are designed, manufactured and examined in this thesis. The device is microprocessor-controlled, which allows to switch between multiple modes of operation. Flyback SMPS is used to power the microcontroller.
|
|
|
Design of indoor lighting in a trend of Human Centric Lighting
Ruml, Filip ; Baxant, Petr (referee) ; Antoš, Martin (advisor)
The main tasks of the thesis lie in summary of present state in Human Centric Lighting field, in the optical design of luminaire and in practical verification of the proposal. The design is developed in software LightTools and for the verification of functionality the software Dialux EVO is employed. The luminaire is designed primarily with respect to the influence of light on the man and the physiological, psychological and behavioural responses in humans. The thesis is created in cooperation with the company Robe Lighting s.r.o. The proposal of the luminaire corresponds to the current state of knowledge in the area of light influence on humans. The designed luminaire in the trend HCL is distinguished by the high quality of emitted light but also with higher costs of the operation.
|
|
|
Design of lighting system in high school
Borůvka, Jan ; Štěpánek, Jaroslav (referee) ; Škoda, Jan (advisor)
The theoretical part is focused on lights, notions and calculations in the area of light technology, basic lightning sources and lamps. This work is also about the principle of lightning measuring. The main aim of the work is design of a new artificial lightning system in a High school agriculture in Prerov. At first, the control measuring of existing lightning was done which is mentioned in this work. From the results of control measuring is clear, that existing lighting system in classroom does not suit requirements, which are mentioned in the valid technical norm. Design of a new lightning system meets the requirements in all of the rooms in the building of school. Design of lightning system was done in two variants. The first variant uses lamps with fluorescent tube light sources. The second variant uses lamps with LED light sources. Also is here evaluated financial difficulty of possible installation and comparation of each variants with respect energetic difficulty.
|
|
|
Luminaire position influence on measured parameters in integrating sphere.
Vlček, Pavel ; Škoda, Jan (referee) ; Motyčka, Martin (advisor)
This bachelor thesis deals with the influence of the position of luminaires with narrow radiation characteristics when measured in the integrating sphere. The basic light technical parameters are summarized here. Especially, luminous flux, illuminance, solid angle, luminous intesity and luminance, followed by colour temperature and general colour rendering index. This thesis also deals with the measuring instruments, at first with the basic element, which is the photoelement and then with the following instruments: the illuminance meter, the luminance meter, the spectroradiometer, the goniophotometer and the integrating sphere. The thesis is summarization of the basic information about luminaires. This theory is followed by a laboratory measurement that deals with the measurement of luminaires on a goniophotometer and in the integrating sphere. Goniophotometer measurements are important in conditions of acquire accurate luminous flux. The luminous flux from the goniophotometer is compared with the single measured values in the set positions when measured in the integrating sphere. As a result, the position of the luminaire in the integrating sphere is influenced
|
guest ::
