|
| |
|
|
Surface hardening of cast iron by high power diode laser
Bezděk, Pavel ; Daněk, Ladislav (referee) ; Mrňa, Libor (advisor)
The Master’s thesis deals with the technology of surface hardening by laser. High power diode laser is used for this purpose. Surface hardening is performed on cast iron BS 1452-77, at different speeds laser head and laser power. In introduction, the theoretical part deals with possible ways of hardening focusing on the benefits of laser hardening. There are mentioned basic parts of laser, type industrial lasers and their application in industry. The final part is mentions the using of material and methods used to evaluate samples. The practical part describes the using devices and carries out evaluation macrostructure and microstructure and evaluation of hardness depending on the distance from the surface.
|
|
|
Simulation of rolling operation using explicit FEM
Bezrouková, Martina ; Zemčík, Oskar (referee) ; Zouhar, Jan (advisor)
The purpose of this work is to introduce explicit finite element method (FEM) and to familiarize with commercial software tools witch are capable to perform simulations. The technological conditions and the scope of application of roller burnishing are described in subsequent part. The simulation model of roller burnishing was created. Software ANSYS LS-DYNA was used to make computations. The results of simulation and technical and economical benefits of roller burnishing are presented in the conclusion.
|
|
|
Surface treatment of selected steels using electron beam
Matlák, Jiří ; Jan, Vít (referee) ; Kouřil, Miloslav (advisor)
The aim of diploma thesis was preparation of hardened layer on three chosen types of materials with different alloying components content without surface melt by using electron beam technology. The influence of chosen process parameters was observed on the prepared hardened layers properties and shapes. In the first part of bibliographic search there are described electron beam properties, possibilities of his influencing and control. There is given example of complete set of electron beam are mentioned in the second part of theoretical research.
|
|
|
Possibilities of increasing the durability of concrete products based technologies hardening their surface
Minaříková, Kateřina ; Eger, Lukáš (referee) ; Hubáček, Adam (advisor)
In the last years, we focus on higher quality of surfaces in the field of vibro-pressed concrete products. Therefore, there are products with specially modified backing layer in the market where there is implemented impregnation coating on the surface that is cured by ultraviolet and infrared radiation. The primary objective of my thesis is summary of the existing knowledge about vibro-pressed concrete products that are modified by these technologies. I will especially focus on description and efficiency of using particular methods, principals of curing surfaces and other modification of concrete product’s surfaces with emphasis on its durability. There will be examined in the laboratory conditions some of the characteristics of these vibro-pressed concrete products as resistance of surfaces against water effects and chemical defrosting substances, water absorption of surfaces, abrasion resistance, slip resistance, as well as risk reduction of creating lime efflorescence on the concrete surfaces.
|
|
| |
|
|
Rotary flash hardening with help of electron beam and laser radiation
Klusáček, Martin ; Jan, Vít (referee) ; Kouřil, Miloslav (advisor)
This master thesis deals with surface hardening of steels, especially with rotary flash hardening of 42CrMo4 steel (WNr 1.3563, ČSN 15142). In this method homogenous heating of whole surface occurs during a very fast rotation of the component. In the theoretical part of this thesis the most common methods of surface hardening are described, with focus on laser and electron beam technologies. In the experimental part special device for this application was constructed. Rotary flash hardening was done using different radiation source and experimantal device parameters. The hardened surface layer of maximal thickness of 0,7 mm and width of 5,6 mm was achieved using laser beam. Results with electron beam were way better, because this technology allows to control the distribution of power along the beam width in order to improve the width/thickness ratio of hardened layer. Using this method maximal layer thickness of 1,4 mm and width of 13,4 mm was achieved.
|
|
|
Use of laser scanning head for surface hardening
Jedličková, Veronika ; Sigmund, Marian (referee) ; Mrňa, Libor (advisor)
The diploma thesis addressed the issue of laser surface hardening using dynamic oscillation of the laser beam. The theoretical part presents the hardening technology and suitable using of laser equipments. The fiber laser YLS 2000 was used in the experiment and the hardened material was steel 12 050, which is suitable for laser hardening. The influence of two selected parameters of the scan head on the resulting structure and hardness of hardening layers was examined. Based on the results, the choice of optimal parameters for identical conditions with the experiment was recommended.
|
|
|
Surface treatment of selected steels using electron beam
Oríšek, Petr ; Jan, Vít (referee) ; Kouřil, Miloslav (advisor)
The thesis aims for the surface treatment of materials using electron beam. It includes a literary research describing physical principle and properties of the electron beam. This research also presents possible influencing of the beam and describes the construction of the device that generates the beam. Various applications of the electron beam for the material treatment are presented in the second part of the paper. Within this thesis an experiment with the heat treatment of the steel surface by the electron beam has been realized. The experiment was aimed at creating a layer as deep as possible without melting the surface. The results and their evaluation are presented in the experimental part of the thesis. The attention is also paid to selected process parameters.
|
|
|
Mobile equipment for the surface hardening
Bašek, Ondřej ; Veselý, Oldřich (referee) ; Černý, Michal (advisor)
Diploma thesis is specialized in an engineering design of mobile equipment for the surface hardening. At first, overview of methods and instruments for surface hardening is introduced. Solution to the thesis is a proposial for any eventual options of contruction, appreciation and choice of a suitable option. Subsequently, particular parts of the equipment with design and check calculations are explicated. Constructional tasks were done in the SolidWorks program. Finally, an economical analysis is described.
|
guest ::
