National Repository of Grey Literature 13 records found  1 - 10next  jump to record: Search took 0.01 seconds. 
Design of the circle concrete tank
Šimek, Ondřej ; Chalabala, Jiří (referee) ; Klusáček, Ladislav (advisor)
The diploma‘s thesis deals with the design and assessment of prestressed cocrete tank of biogas station at ultimate limit state and also at serviceability limit state, according to ČSN EN 1992-1-1: Design of concrete structures. Specifically, the design of wall of the tank and foundation slab. The text part contains general information on the desing of the structure, static idealization of the structure, type of load and method for calculation of inner forces. Attachments contain drawing documentation and structural analysis, which completes the text part and solves in detail said structure.
Design of the uderground part of the building
Šimek, Ondřej ; Hrubý, Tomáš (referee) ; Klusáček, Ladislav (advisor)
The bachelor‘s thesis deals with the design and assessment of reinforced concrete monolithic supporting structure of underground garages under apartment building at ultimate limit state and also at serviceability limit state, according to ČSN EN 1992-1-1: Design of concrete structures. Specifically, the design of the ceiling slab, girders, the selected column, the selected part of the wall and foundation under columns. Other parts of the building are not solved in the project. The text part contains general information on the desing of the structure, static idealization of the structure, type of load and method for calculation of inner forces. Attachments contain structural analysis, which completes the text part and solves in detail selected elements of the structure and the drawing documentation.
Condition and Control Active Safety
Gašpar, Daniel ; Drápal, Lubomír (referee) ; Blaťák, Ondřej (advisor)
Bachelory work concerns conditional and control safety, shows thermal conditions of car crew, obligated specifications for heating and air-conditioning. Focuses on cooling units, defines exact part of air-condition´s systém, transfer of heat between a cabin of a car and souroundings, reduction of consumption and ways of reaching of this statement. Next it is encouraged with comfortability of siting, mainly locating people in bodywork, geometry inside space and creating virtual model and constructing seats.
Ergonomie kostelní lavice
Větrovská, Klára
This bachelor thesis deals with the analysis of the ergonomics of the church pew and its own design. In the first part, we familiarize ourselves with the spiritual and material significance of the church pew and its needs and differences from other sitting furniture. This section also explains the concepts of ergonomics and anthropometry. It introduces their history and significance to man. The second part contains specific measurements of church pews and an analysis of measured values. The data is shown in the charts. In the third part, the creation of a custom design of a church pew made of solid wood, including a reshuffle, is recorded. There are three designs in both 2D and 3D execution and more detailed processing of the final design, which includes a description of the production.
Design odpočinkového sedacího prvku
Blahunková, Petra
The diploma thesis focuses on the design of a seat furniture element. It is divided into two parts. The first one takes a closer look at history, ergonomy, safety requirements, material usage and technologies used in the manufacturing process that are related to a final draft. The second part describes creation and manufactury progress from an original inspiration itself trough first drafts via 3D visualizations in Autodesk 3ds Max software up to the final production of the prototype scaled 1:1. The thesis also includes price calculations along with drawing documentation for a complete production process.
The characteristic of a sedentary lifestyle
KLEČKA, Aleš
This bachelor thesis deals with the characteristics of a sedentary lifestyle and its negative effects on human health. The phenomenon of sedentary lifestyle has a large share in the emergence of diseases of civilization, especially vertebrogenic disease, which are currently the first place. In the individual chapters of the work he characterizes the lifestyle, movement, sitting and sedentary lifestyle. In others, it develops correct and defective posture, seating compensation, ergonomics and a change of thinking. The sedentary style is subject of many Czech and foreign studies. Some studies appropriate to the topic of this work are described in the discussion and compared in terms of impacts on lifestyle and human health. The discussion shows that the sitting time is constantly increasing and with it its negative effects on human health.
Influence of compensatory mechanisms arising from violin playing using the DNS method
Hryzlíková, Eliška ; Oplatková, Lenka (advisor) ; Pelíšková, Pavlína (referee)
This thesis investigates compensatory mechanisms arising from playing the violin. It summarizes the existing literature on the topic of the influence of violin playing on the posture of violinists and proposes a compensatory exercise according to the DNS method. The theoretical part describes the "ideal" position for violin playing, the effect of ergonomic aids, kinesiology of playing, anatomy of the shoulder girdle, and finally the compensatory mechanisms stemming from holding and playing the violin while sitting and connected health problems. The experimental part presents the results of case studies of 8 non-professional violin players aged from 18 to 30 years, evaluation of their posture and musculoskeletal disorders, and the proposed compensatory exercise according to the DNS method. The anamnestic data were obtained through a survey and the health condition of the musculoskeletal system is investigated using a kinesiological examination (inspection and palpation, anthropometric measurements, and specific tests for deep stabilizing system and scapula). Inspection and palpation measurement cannot be objectively measured and therefore the obtained measurements serve only as a relative guide for the evaluation. The greatest muscle load is generally in the areas of cervical spine and shoulder...
Design of the circle concrete tank
Šimek, Ondřej ; Chalabala, Jiří (referee) ; Klusáček, Ladislav (advisor)
The diploma‘s thesis deals with the design and assessment of prestressed cocrete tank of biogas station at ultimate limit state and also at serviceability limit state, according to ČSN EN 1992-1-1: Design of concrete structures. Specifically, the design of wall of the tank and foundation slab. The text part contains general information on the desing of the structure, static idealization of the structure, type of load and method for calculation of inner forces. Attachments contain drawing documentation and structural analysis, which completes the text part and solves in detail said structure.
Back pain of working people
ZELENKOVÁ, Benedikta
This bachelor thesis deals with low-back pain in patients who are mostly sitting at work. The thesis is divided into two main parts, theoretical and practical. In the theoretical part, the function, anatomy and kinesiology of the spine are first described. It also explains the deep stabilization system, its importance and its examinations. Further, most common causes of vertebrogenic problems are described and the word pain itself together with is explained. In this part, pain is divided into several categories. In conclusion, individual examinations and possibilities of therapy in back pain are described. Individual examinations are also included in kinesiological analyzes of all patients. The practical part of the thesis was done in a form of qualitative research. The examined group consists of three respondents men in between 45 and 55 years who were suitable figures for this work. Two patients were patients from rehabilitation center in Borovany where I had the opportunity to work with them and the third patient is a member of my family and I worked with him at home. This part consists of elaborated case studies of individual patients, proposed therapies and their description and physiotherapeutic examinations after all therapies. The main aim of this work was to describe the possibilities of physiotherapy treatment in people with sedentary job suffering from back pain. The second objective was to map the problem, propose suitable therapy, and then evaluate its effect. I met with patients six times in six weeks. I stressed the importance of proper posture while sitting, standing and lifting heavy loads. All patients were well educated on this issue. Crucial is also regularity of the proposed exercises, which all can be done at home. The success of the therapy was evaluated by subjective patient's assessment and by comparison of kinesiology carried out before the start and after the end of the whole therapy. This allows me to state that both objectives of the work have been met.
Design of the uderground part of the building
Šimek, Ondřej ; Hrubý, Tomáš (referee) ; Klusáček, Ladislav (advisor)
The bachelor‘s thesis deals with the design and assessment of reinforced concrete monolithic supporting structure of underground garages under apartment building at ultimate limit state and also at serviceability limit state, according to ČSN EN 1992-1-1: Design of concrete structures. Specifically, the design of the ceiling slab, girders, the selected column, the selected part of the wall and foundation under columns. Other parts of the building are not solved in the project. The text part contains general information on the desing of the structure, static idealization of the structure, type of load and method for calculation of inner forces. Attachments contain structural analysis, which completes the text part and solves in detail selected elements of the structure and the drawing documentation.

National Repository of Grey Literature : 13 records found   1 - 10next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.