|
|
Family House
Matula, Martin ; Šagát, Erik (referee) ; Matějka, Libor (advisor)
This presented bachelor thesis is composed of complete project documentation used as a background for building permit for construction family house. The main part is formed by project documentation and technical report. Parts of this thesis are also dispositional and architectonic studies, constructional details, thermal-technical studies, design of stairs and design of foundations.
|
|
|
Mountain pension
Soukupová, Alžběta ; Bartolšic, Vít (referee) ; Matějka, Libor (advisor)
This thesis deals with a design of an energy-efficient hotel in the Jeseníky mountains. Main parts of the project are to be found in folder C, containing the drawings including five technical details, technical report with attached list of compounds, thermal assessment and fire safety project. The work also contains a study in folder B, which represents the initial version of the project, including the evolution of the project, staircase calculation and simple visualization. This thesis can be used as project documentation for actual building operation.
|
|
|
Providing measured documentation of existing structural and technical conditions of a house in Hodonín
Kadlčík, Radek ; Bradáč, Albert (referee) ; Šmahel, Milan (advisor)
The diploma thesis deals with solving passportization of the existing structural and technical conditions and the proposed modifications family house in Hodonin. The project includes theoretical part describing the defect of brick constructions and other related topics. Next explaining the problems of the building passportization, processing passport current state of the house in Hodonín with the marking of construction defects and failures. Followed by a proposal to repair these defects and failures, increased structural and technical standards. Preparation of a proposal modernization of the building. Compilation itemized budget for individual defects and failures.
|
|
| |
|
|
Apartment building
Hoferek, Radomír ; Žajdlík, Tomáš (referee) ; Čuprová, Danuše (advisor)
The subject of the bachelor’s thesis is elaboration of design documentation for execution of an apartment building. It is a building with four above-ground floors with partial basement including twelve dwelling units. The structural system is wall transverse system made of clay blocks, except of perimeter basement walls, which are lined with concrete fittings (lost formwork). The ceiling structure is made of ceramic concrete ceiling beams POT and MIAKO inserts. The roof structure is designed as a warm flat roof. The whole object is insulated with a certified thermal insulation system. The entrance to building is from the north. On the plot there is parking for sixteen cars.
|
|
|
Apartment building
Šafr, Matěj ; Vaněk, Vojtěch (referee) ; Utíkalová, Ivana (advisor)
This bachelor thesis focuses on the development of project documentation for the construction of an apartment building. It is a building with 10 storeys and a full basement. The above-ground floors are mainly residential units and partly studios. This multi-storey building is also equipped with an elevator and an underground parking space, which is accessible by a car lift. The ground floor also houses a bicycle shop. The residential building will be located on the cadastral territory of the municipal district of Černá pole [610771], the entire building is located on plot number 3794 in Brno. Vertical load-bearing structures are designed mainly as reinforced concrete, then ceramic masonry in the higher receding floors. Horizontal load-bearing structures are designed as monolithic reinforced concrete. The roofs of the building are designed as flat single-skin roofs with an extensive vegetation layer, terraces are constructed with ceramic tiles. The foundation is designed on piles with a diameter of 600 mm and a waterproof monolithic reinforced concrete slab.
|
|
|
Apartment building
Pojezdala, Petr ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
The bachelor's thesis deals with the project documentation at the construction implementation level for an energy-efficient residential building. The designed residential building is located in the village of Tynište nad Orlici, specifically in its peripheral part called Podbori. The building is situated on a flat terrain with a slight slope. It is a four-story residential building with a basement, accommodating a total of seven housing units. The structural system of the building is designed using Therm blocks with a certified thermal insulation system. The Therm blocks form the internal load-bearing walls of the above-ground floors as well as the basement of the building. The perimeter walls of the basement floor are made of plain vibrated concrete blocks. The residential building is roofed with a flat single-ply extensive green roof, which is prepared for the installation of photovoltaic panels to utilize alternative energy sources. The building is founded on foundation strips, and the floor structures are designed as monolithic reinforced concrete slab floors.
|
|
|
Preparation of Construction and Site Facilities
Maršálek, Ondřej ; Trtílek, Petr (referee) ; Nováková, Jana (advisor)
The bachelor thesis is divided into two parts, theoretical and practical. The theoretical part of the thesis first describes the preparation of the construction from the perspective of the contractor's behaviour in the bidding, pre-production and production preparation of the construction contract. Next, the site facilities are described in terms of their function, zoning and effective planning. The main objective of the practical part of the work is to prepare a technical report and a drawing of the site equipment situation for a specific set of two apartment buildings in the village of Nezdenice.
|
|
|
Apartment building in Bučovice
Konečná, Dominika ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
In the town of Bučovice, on plot number 1282/100 in the cadastral area of Bučovice, a new apartment building has been designed. The construction is located on a nearly flat plot. The land-use plan designates the area as residential space for apartment buildings. The building consists of one underground floor and three above-ground floors. There are six residential units planned in the building. The entrance to the building is located on the northeast side and is designed with barrier-free access. The first underground floor houses cellar storage rooms, technical facilities for the apartment building, and three separate garage spaces. On the first above-ground floor, right after the entrance, there is a shared stroller and bicycle storage room. Additionally, there are two 1-room-kitchen (1KK) apartments on this floor. On the second above-ground floor, there are two 2-room-kitchen (2KK) units, and on the third above-ground floor, there are again two 1KK units. The foundation structures are constructed using a system of plain concrete strip foundations. The perimeter walls of the above-ground floors are built with ceramic blocks and insulated with an ETICS (Exterior Thermal Insulation Composite System) contact system with a thickness of 200mm. The staircase and intermediate landings are prefabricated, and the ceiling structures are monolithic reinforced concrete. The building is roofed with a flat green roof.
|
|
|
Electrical installation for apartment building with partial automation
Poruba, Marcel ; Janík, Daniel (referee) ; Mastný, Petr (advisor)
The bachelor thesis deals with the implementation of power and data installations and systems for the automation of electrical installations. The thesis is divided into theoretical and practical part. The theoretical part describes the legislative and safety requirements for the realisation of project documentation and the methods of implementation of individual parts of electrical distribution systems, including a section on systems for the automation of electrical installations. The TECOMAT Foxtrot system, which is used in the second part of the thesis for controlling electrical installations, is described. The practical part contains the complete project documentation for the apartment build ing in the stage of documentation for the construction. The drawing part contains drawings of the floor plans of the building, in which the power wiring and data wiring including the control by the Foxtrot wiring system are drawn. The documentation includes wiring diagrams of switchboards, drawings of lightning protection system, technical report, budget and calculation of switchboards in Sichr software.
|
guest ::
