|
|
Home health services - Bobrová, technological stage of roofing
Malý, Martin ; Hanzelková, Martina (referee) ; Šlanhof, Jiří (advisor)
The bachelor thesis deals with structural and technological solution to roofing of the house health services in Bobrové, in the Highlands. Addresses the implementation of a truss structure of a gable roof and a subsequent cladding. The main content of the work formed the technical report, the construction situation, the budget with the statement of assessment, technological regulation, construction site equipment, timetable, design of mechanical assembly, inspection and test plan and work safety.
|
|
|
Family house Rb -3
Růžička, Jiří ; Sibilla, Luboš (referee) ; Vlček, Milan (advisor)
The project is design a house with a small establishment. The project includes the layout and the design of the house. The house has three floors with an attic and one basement floor. It is designed as a stand-alone. The first floor of the establishment of the background and the main entrance to the house. The rest of the house is designed for family living. This part is a utility room, basement and garage in the basement. Living room with household equipment is then in the upper part of the house. The house is run by two separate entrances with wheelchair access to the premises and the entrance to the garage in the basement. The house is designed as a brick building of brick masonry Porotherm in modular size 250 (125) mm with ceramic ceilings MIAKO a cylinder. Roofed by a gabled roof. The house is located on a private plot of 1200 m2 with built up area of 120 m2. The land is gently sloping.
|
|
|
Timber load bearing structure of a family house
Perhalová, Anna ; Buchta, Stanislav (referee) ; Straka, Bohumil (advisor)
The subject of this bachelor's thesis is design and static assessment of timber load bearing structure of the family house. The object is located in Slavkov u Brna. Design of truss structure is based on architectural study by prof. Ing. arch. Ivan Ruller. The ground plan dimensions of load bearing structure are 11,63x15,00 meters and the height of the roof ridge is 6,56 meters. The structure of the roof is made as a rafter system, which is supported on the lattice truss, on the main beam and wall rafters. Horizontal forces are transferred into the wall panels by means of tight members, which are anchored to wall rafters.
|
|
|
The reconstruction design of timber structures of the existing building
Bartlová, Jana ; Šmak, Milan (referee) ; Straka, Bohumil (advisor)
The content of this work was to carry out construction-technical survey of timber structures of the existing building in order to design an appropriate procedure for their reconstruction. The survey showed construction in an unsatisfactory to disrepair, so further work also includes the static calculation of new structures proposed instead of the current. Timber structure in the building has form of staircase, roof and ceiling construction. Newly designed the following types of stairs and roof trusses from which the lower belts are used as ceiling beams. The new proposal also includes possible roofing, roofing options, developed one of them. The work also includes drawings, bill of materials and cost estimate staircase structure and truss. Specialization in the field of civil engineering is represented by drawings of the new truss and passport (view of current state) whole object on parcel ST.74 / 1, land Tišnov (okr.Brno-venkov), the content of which was the basis for this work.
|
|
|
Newly built apartment building in Ivančice, implementation of roof cladding
Křeháček, Matěj ; Rychtecký, Martin (referee) ; Kovářová, Barbora (advisor)
The subject of my bachelor's thesis is the design of the supporting structure of the roof including plumbing work and roofing work of a residential building in the village Ivancice u Brna. It is a new building with 16 residential units. The building is without a basement with ground floor, aboveground floor and attic. The bachelor's thesis includes: a technical report, situation of building relationships with the wider transport routes, statement of measurement, technical regulations, organization of construction solutions, schedule of work, design of mechanical assemblies, quality requirements, safety work and details.
|
|
|
Multifunctional house in Karlovy Vary
Růžička, Jiří ; Vlček, Ing Karel (referee) ; Vlček, Milan (advisor)
The project solves a multifunctional Duma building in a vacant lot, contemplated the construction site is located in Carlsbad, in the street Vyhlíce. This is a protected site spa. Part of the project's layout and structural design of the house. It is a six-storey house with an attic and a basement floor. It is designed as a free-standing in the gap as the final house. The layout is divided into two complete units with their own input. There are spaces for business and residential units for permanent housing. Part of the living area are also room house equipment. Inputs to both parts are wheelchair accessible. The house is not wheelchair The house is designed as a brick building of brick masonry Porotherm the module dimensions of 250 (125) mm with reinforced concrete ceilings. Roofed by a hipped roof. The house is located on a private plot of 519 m2 built-up area of 221 m2. The land is gently sloping. The main orientation of the building to the cardinal's east and west. The south wall is adjacent to the neighboring house.
|
|
|
Multifunctional house in Karlovy Vary
Růžička, Jiří ; Vlček, Ing Karel (referee) ; Vlček, Milan (advisor)
The project solves a multifunctional Duma building in a vacant lot, contemplated the construction site is located in Carlsbad, in the street Vyhlíce. This is a protected site spa. Part of the project's layout and structural design of the house. It is a six-storey house with an attic and a basement floor. It is designed as a free-standing in the gap as the final house. The layout is divided into two complete units with their own input. There are spaces for business and residential units for permanent housing. Part of the living area are also room house equipment. Inputs to both parts are wheelchair accessible. The house is not wheelchair The house is designed as a brick building of brick masonry Porotherm the module dimensions of 250 (125) mm with reinforced concrete ceilings. Roofed by a hipped roof. The house is located on a private plot of 519 m2 built-up area of 221 m2. The land is gently sloping. The main orientation of the building to the cardinal's east and west. The south wall is adjacent to the neighboring house.
|
|
|
Home health services - Bobrová, technological stage of roofing
Malý, Martin ; Hanzelková, Martina (referee) ; Šlanhof, Jiří (advisor)
The bachelor thesis deals with structural and technological solution to roofing of the house health services in Bobrové, in the Highlands. Addresses the implementation of a truss structure of a gable roof and a subsequent cladding. The main content of the work formed the technical report, the construction situation, the budget with the statement of assessment, technological regulation, construction site equipment, timetable, design of mechanical assembly, inspection and test plan and work safety.
|
|
|
The reconstruction design of timber structures of the existing building
Bartlová, Jana ; Šmak, Milan (referee) ; Straka, Bohumil (advisor)
The content of this work was to carry out construction-technical survey of timber structures of the existing building in order to design an appropriate procedure for their reconstruction. The survey showed construction in an unsatisfactory to disrepair, so further work also includes the static calculation of new structures proposed instead of the current. Timber structure in the building has form of staircase, roof and ceiling construction. Newly designed the following types of stairs and roof trusses from which the lower belts are used as ceiling beams. The new proposal also includes possible roofing, roofing options, developed one of them. The work also includes drawings, bill of materials and cost estimate staircase structure and truss. Specialization in the field of civil engineering is represented by drawings of the new truss and passport (view of current state) whole object on parcel ST.74 / 1, land Tišnov (okr.Brno-venkov), the content of which was the basis for this work.
|
|
|
Timber load bearing structure of a family house
Perhalová, Anna ; Buchta, Stanislav (referee) ; Straka, Bohumil (advisor)
The subject of this bachelor's thesis is design and static assessment of timber load bearing structure of the family house. The object is located in Slavkov u Brna. Design of truss structure is based on architectural study by prof. Ing. arch. Ivan Ruller. The ground plan dimensions of load bearing structure are 11,63x15,00 meters and the height of the roof ridge is 6,56 meters. The structure of the roof is made as a rafter system, which is supported on the lattice truss, on the main beam and wall rafters. Horizontal forces are transferred into the wall panels by means of tight members, which are anchored to wall rafters.
|
guest ::
