|
|
Design of nf electron-valve stereo amplifier
Dofek, Přemysl ; Rampl, Ivan (referee) ; Káňa, Ladislav (advisor)
This master’s thesis is dealing with low frequency all valve stereo amplifier unit conception for an electric guitar. The amplifier contains two independent output stages with two power tubes EL34, working in AB class, with 40Watts of power. The apparatus is equipped with two channels, EQ correctors, parallel effects loop, output selection with lowered anode power supply, selection between silicon or tube rectifier. The preamplifier works in mono mode and the stereophony is reached by dividing the signal in an added effects system. This unusual solution differs from both monaural conceptions and binaural power amplifiers which contains no preamp. It offers the possibility of stereophony without the necessity of dividing the guitar signal before the amplifier’s input. The sound that comes from the speaker on one side is effected and on the other side is dry by using monaural effects apparatus. The sound from both speakers is effected by using binaural effect apparatus. The amplifier can be used as power amplifier stage only when the return of the effect loop is used as the amplifier input. Every available possible solution is discussed in case of each block and then the most suitable is chosen. The biggest attention is paid to a proposal and calculation of both power and output transformer, ergonomical lay-out of the stages in need of the best S/N separation. The stages were simulated in Micro-Cap 9.0 and Tonestack 1.3 computer programmes. The construction was carried out with the emphasis on proper shielding and grounding. The overall stability tests were performed after building the amplifier as well as frequency characteristics with the scope and distortion with the distortion meter.
|
|
|
Switching power supply for electron microscope
Jánešová, Daniela ; Szendiuch, Ivan (referee) ; Hejátková, Edita (advisor)
This thesis is about theory of switching power supplies and about a specific solution of switching power supply for electron microscope. In the beginning of the thesis are mentioned various solutions of part blocks of switching power supplies, their advanteges and disadvanteges, and their suitability for electron microscopy. In the next part of the thesis are described requirements and design scheme of switching power supply for scanning part of electron microscope. The thesis i also about technical solution and practical testing of the switching power supply and verification of its functions.
|
|
|
Switching power supply for electron microscope
Jánešová, Daniela ; Szendiuch, Ivan (referee) ; Hejátková, Edita (advisor)
This thesis is about theory of switching power supplies and about a specific solution of switching power supply for electron microscope. In the beginning of the thesis are mentioned various solutions of part blocks of switching power supplies, their advanteges and disadvanteges, and their suitability for electron microscopy. In the next part of the thesis are described requirements and design scheme of switching power supply for scanning part of electron microscope. The thesis i also about technical solution and practical testing of the switching power supply and verification of its functions.
|
|
|
Design of nf electron-valve stereo amplifier
Dofek, Přemysl ; Rampl, Ivan (referee) ; Káňa, Ladislav (advisor)
This master’s thesis is dealing with low frequency all valve stereo amplifier unit conception for an electric guitar. The amplifier contains two independent output stages with two power tubes EL34, working in AB class, with 40Watts of power. The apparatus is equipped with two channels, EQ correctors, parallel effects loop, output selection with lowered anode power supply, selection between silicon or tube rectifier. The preamplifier works in mono mode and the stereophony is reached by dividing the signal in an added effects system. This unusual solution differs from both monaural conceptions and binaural power amplifiers which contains no preamp. It offers the possibility of stereophony without the necessity of dividing the guitar signal before the amplifier’s input. The sound that comes from the speaker on one side is effected and on the other side is dry by using monaural effects apparatus. The sound from both speakers is effected by using binaural effect apparatus. The amplifier can be used as power amplifier stage only when the return of the effect loop is used as the amplifier input. Every available possible solution is discussed in case of each block and then the most suitable is chosen. The biggest attention is paid to a proposal and calculation of both power and output transformer, ergonomical lay-out of the stages in need of the best S/N separation. The stages were simulated in Micro-Cap 9.0 and Tonestack 1.3 computer programmes. The construction was carried out with the emphasis on proper shielding and grounding. The overall stability tests were performed after building the amplifier as well as frequency characteristics with the scope and distortion with the distortion meter.
|
guest ::
