|
|
Unconventional preparation technology of bulk material from Mg
Horálek, Matyáš ; Hasoňová, Michaela (referee) ; Březina, Matěj (advisor)
Topic of the bachelor's thesis is the procedure of preparation and processing of bulk magnesium powder by unconventional technologies. Bulk materials were evaluated from the point of porosity, microstructure and physically-mechanical properties in correlation with changes of parameters during preparation. Furthemore the influence of chosen processing parameters of electron beam was evaluated from structural properties and depth of the affected material. The outcome of this work is focused on study and optimalization of parameters during preparation and processing of bulk material.
|
|
|
Surface treatment of selected steels using electron beam
Matlák, Jiří ; Jan, Vít (referee) ; Kouřil, Miloslav (advisor)
The aim of diploma thesis was preparation of hardened layer on three chosen types of materials with different alloying components content without surface melt by using electron beam technology. The influence of chosen process parameters was observed on the prepared hardened layers properties and shapes. In the first part of bibliographic search there are described electron beam properties, possibilities of his influencing and control. There is given example of complete set of electron beam are mentioned in the second part of theoretical research.
|
|
|
Surface melting of graphitic cast iron for hard layer preparation and its optimization
Adam, Ondřej ; Matlák, Jiří (referee) ; Jan, Vít (advisor)
The aim of bachelor thesis is description of microstructures, which were created by surface melting of ductile iron by using electron beam technology. The first part of bibliographic search deals with carbon and its effect on iron. The second part is focused on the general knowledge about cast irons, especially on graphitic cast irons. The last part of bibliographic search deals with electron beam technology. The practical part presents a microstructures, which were created by surface melting. Temperature cycles of the different material areas are described based on microstructures. In the end of bachelor thesis, there are chosen remelted layer with the best parametres and surface melting technology is optimized.
|
|
|
Surface Treatment Technology of Metallic Materials and its Applications using Electron Beam
Matlák, Jiří ; Dupák, Libor (referee) ; Houdková, Šárka (referee) ; Foret, Rudolf (advisor)
Fast deflection is one of the great advantages of an electron beam, making it possible to process a relatively large area at once and also to modify the distribution of the supplied energy. The dissertation deals with surface heat treatment with a focus on the effect of beam deflection on the process. Furthermore, the influence of processing speed and defocusing of the electron beam is studied. The principles of electron beam technology and the summary of surface heat treatment of various materials are presented in the literary part of the thesis. The experimental part is focused on the influence of process parameters on processing in the solid phase, carried out on steel 42CrMo4, and in in the liquid phase, carried out on alloy NiCrBSi. Especially changes in structure, hardness, shape of the processed area and wear resistance are evaluated on processed samples. The results are also evaluated from an energy perspective. Furthermore, an optimum combination of technological parameters is recommended for solid and liquid phase surface heat treatment.
|
|
|
Surface treatment of selected steels using electron beam
Oríšek, Petr ; Jan, Vít (referee) ; Kouřil, Miloslav (advisor)
The thesis aims for the surface treatment of materials using electron beam. It includes a literary research describing physical principle and properties of the electron beam. This research also presents possible influencing of the beam and describes the construction of the device that generates the beam. Various applications of the electron beam for the material treatment are presented in the second part of the paper. Within this thesis an experiment with the heat treatment of the steel surface by the electron beam has been realized. The experiment was aimed at creating a layer as deep as possible without melting the surface. The results and their evaluation are presented in the experimental part of the thesis. The attention is also paid to selected process parameters.
|
|
|
Surface Treatment Technology of Metallic Materials and its Applications using Electron Beam
Matlák, Jiří ; Dupák, Libor (referee) ; Houdková, Šárka (referee) ; Foret, Rudolf (advisor)
Fast deflection is one of the great advantages of an electron beam, making it possible to process a relatively large area at once and also to modify the distribution of the supplied energy. The dissertation deals with surface heat treatment with a focus on the effect of beam deflection on the process. Furthermore, the influence of processing speed and defocusing of the electron beam is studied. The principles of electron beam technology and the summary of surface heat treatment of various materials are presented in the literary part of the thesis. The experimental part is focused on the influence of process parameters on processing in the solid phase, carried out on steel 42CrMo4, and in in the liquid phase, carried out on alloy NiCrBSi. Especially changes in structure, hardness, shape of the processed area and wear resistance are evaluated on processed samples. The results are also evaluated from an energy perspective. Furthermore, an optimum combination of technological parameters is recommended for solid and liquid phase surface heat treatment.
|
|
|
Unconventional preparation technology of bulk material from Mg
Horálek, Matyáš ; Hasoňová, Michaela (referee) ; Březina, Matěj (advisor)
Topic of the bachelor's thesis is the procedure of preparation and processing of bulk magnesium powder by unconventional technologies. Bulk materials were evaluated from the point of porosity, microstructure and physically-mechanical properties in correlation with changes of parameters during preparation. Furthemore the influence of chosen processing parameters of electron beam was evaluated from structural properties and depth of the affected material. The outcome of this work is focused on study and optimalization of parameters during preparation and processing of bulk material.
|
|
|
Surface melting of graphitic cast iron for hard layer preparation and its optimization
Adam, Ondřej ; Matlák, Jiří (referee) ; Jan, Vít (advisor)
The aim of bachelor thesis is description of microstructures, which were created by surface melting of ductile iron by using electron beam technology. The first part of bibliographic search deals with carbon and its effect on iron. The second part is focused on the general knowledge about cast irons, especially on graphitic cast irons. The last part of bibliographic search deals with electron beam technology. The practical part presents a microstructures, which were created by surface melting. Temperature cycles of the different material areas are described based on microstructures. In the end of bachelor thesis, there are chosen remelted layer with the best parametres and surface melting technology is optimized.
|
|
|
Surface treatment of selected steels using electron beam
Oríšek, Petr ; Jan, Vít (referee) ; Kouřil, Miloslav (advisor)
The thesis aims for the surface treatment of materials using electron beam. It includes a literary research describing physical principle and properties of the electron beam. This research also presents possible influencing of the beam and describes the construction of the device that generates the beam. Various applications of the electron beam for the material treatment are presented in the second part of the paper. Within this thesis an experiment with the heat treatment of the steel surface by the electron beam has been realized. The experiment was aimed at creating a layer as deep as possible without melting the surface. The results and their evaluation are presented in the experimental part of the thesis. The attention is also paid to selected process parameters.
|
|
|
Surface treatment of selected steels using electron beam
Matlák, Jiří ; Jan, Vít (referee) ; Kouřil, Miloslav (advisor)
The aim of diploma thesis was preparation of hardened layer on three chosen types of materials with different alloying components content without surface melt by using electron beam technology. The influence of chosen process parameters was observed on the prepared hardened layers properties and shapes. In the first part of bibliographic search there are described electron beam properties, possibilities of his influencing and control. There is given example of complete set of electron beam are mentioned in the second part of theoretical research.
|
guest ::
