|
|
Vliv konstrukce odhrnovaček na odpor pluhu
Opluštil, Adam
In the theoretical part, the construction of soil preparing machines is discussed, in particular the construction of ploughs is described and the construction of machines for minimizing soil preparing is also described. The practical part dealt with the investigation of two types of plough mouldboards. The first type of design is the standard mouldboard and the second type is the slatted mouldboard. The content of the work was, among other things, to determine which type of construction exerts more resistance on the whole plough. Pöttinger SERVO 45 M PLUS and SERVO 45 M PLUS NOVA ploughs were used for the measurements. Both ploughs were 4-radial reversible so that the results could be compared. A Zetor Forterra 150 HD tractor with a power of 95 kW (129,2 hp) was used as the tractive power source. The field measurement, which took place from 9 August to 11 August 2021, took place in the municipality of Sebranice u Skalice nad Svitavou. The approximately 10 ha of land where the measurements were carried out consisted of brown earth with a humus content of 2,5 %. Furthermore, measuring sections of 50 m length were marked out. During the measurements, data were collected on: time taken to pass the measuring sections, pulling power, fuel consumption, soil compaction and plough depth and width. Fuel consumption was measured with mass flow meters. To measure the specific resistance of the plough, the plough system was pulled by a second tractor. The tractor was a John Deere 8330 tractor with a power of 254 kW (330 hp). The connection between the two tractors was provided by a rope with an embedded Hottinger strain gauge force transducer that was placed in the hitch of the pulling tractor. The condition for calculating the plough resistance was to find the rolling resistance out, which was then subtracted from the tractive force. The results indicated that the average percentage difference between the specific resistances of the ploughs was almost 4,7 % with the standard mouldboard (68.47 kPa) having a higher specific resistance than the slatted mouldboard (65.40 kPa). This suggests that in heavier soils it is economically more advantageous to use a plough with a slatted mouldboard, which has less resistance.
|
|
|
Porovnání utužení půdy na zemědělském pozemku v závislosti na použité technologii jejího zpracování
MACH, Václav
The diploma thesis deals with the issue of soil degradation by compaction and with the influence of different method of cultivation on pedocompaction. It describes the problem of soil compaction, origin of this degradation, its impacts and whether it is possible to prevent the compaction or eliminate it afterwards. It also deals with description of measuring device which is able to find out the figures of penetrometric resistance of soil and its moistness. The thesis also closely describes individual work operations that have been done on the land. The tillage is analysed in detail because it is the system of cultivation that can highly influence the compaction. The most commonly used systems of soil cultivation are mentioned with their advantages and disadvantages. The experiment in the diploma thesis deals with the influence of soil compaction using different technology in its process. The field experiment took place on a trial field that was divided into two parts in terms of tillage. The first part was used for ploughing within three years and on the other ploughing was replaced by loosening. After collecting necessary data their evaluation took place. The figures of penetrometric resistance and soil moisture are summarized in tables and plotted in graphs for better interpretation.
|
|
|
Measurement and evaluation of exploitation and qualitative indicators of ploughing on the specific land
EIBL, Jiří
This diploma thesis focuses on the history of plough production, on the description and using the plough for basic typical soil tillage. Mechanical soil cultivation, that makes the soil loosed, divides, turns and mixes ploughed materials with soil. This process is called ploughing. Stubble-tillage and ploughing is the aim of this thesis, it was done on the determined land with the semi-mounted plough (five- and two- blade insert), and with the full-mounted plough (front part UPS, five- and two- blade insert). There were compared current exploitation and qualitative indicators during the working with the plough in comparable conditions.
|
|
|
Vegetation succession on fallows in Podyjí National Park - small-area management of abandoned sites
Entová, Martina ; Fabšičová, Martina (advisor) ; Karlík, Petr (referee)
The main aim of the thesis was to describe the succession of several abandoned fields under ploughing and discuss ploughing as a possible management for establishing and maintaining species-rich communities of fallows. Actual vegetation, its development over time and soil seed bank were studied. Experimental small-area ploughing was established at five abandoned fields in the southeastern part of the Podyjí National Park. Three strips with different types of management were founded: A) strip ploughed each year, B) strip ploughed once at the beginning of the experiment, C) control meadow without intervention. Vegetation development was evaluated through a series of relèves recorded during the years 2009-2012. The species composition of the seed bank was described using the seedling-emergence method and subsequent elutriation of soil samples. Similarity indexes, Longevity index (LI) and concept of RCS strategies were used. The vegetation of each-year plowed sites (A) consisted mostly of annual weeds and ruderal species with R-strategy and high LI. Grassland vegetation (C) consisted mostly of grasses and perennial herbs with C-strategy and lower LI. The vegetation of older fallows (B) was at first most similar to one-year fallow (A), but during the 4 years of succession has moved closer to the meadow...
|
|
|
Vegetation succession on fallows in Podyjí National Park - small-area management of abandoned sites
Entová, Martina ; Fabšičová, Martina (advisor) ; Karlík, Petr (referee)
The main aim of the thesis was to describe the succession of several abandoned fields under ploughing and discuss ploughing as a possible management for establishing and maintaining species-rich communities of fallows. Actual vegetation, its development over time and soil seed bank were studied. Experimental small-area ploughing was established at five abandoned fields in the southeastern part of the Podyjí National Park. Three strips with different types of management were founded: A) strip ploughed each year, B) strip ploughed once at the beginning of the experiment, C) control meadow without intervention. Vegetation development was evaluated through a series of relèves recorded during the years 2009-2012. The species composition of the seed bank was described using the seedling-emergence method and subsequent elutriation of soil samples. Similarity indexes, Longevity index (LI) and concept of RCS strategies were used. The vegetation of each-year plowed sites (A) consisted mostly of annual weeds and ruderal species with R-strategy and high LI. Grassland vegetation (C) consisted mostly of grasses and perennial herbs with C-strategy and lower LI. The vegetation of older fallows (B) was at first most similar to one-year fallow (A), but during the 4 years of succession has moved closer to the meadow...
|
guest ::
