|
|
Strengthening of roof girders in production hall
Wawreczka, Karel ; Strnad, Jiří (referee) ; Klusáček, Ladislav (advisor)
The aim of my bachelor’s thesis is strengthening of girder roof construction in a production hall. The roof girders were designed 18 years ago in accordance with the Czech standards valid at that time. All the girders are now recalculated according to valid European norms. It is suggested to use prestressed cables guided along the girder construction. Because of the lack of space around the front of girders, it is designed to use prestressing from in the middle. In order to design the cable geometry and the biasing force, it was crucial to take into account shear resistance as well as constraining compressive stress in the concrete. Calculation of the effects of load is carried out by Scia Engineer 2015 computer software whereas Excel has been used for all the other calculations.
|
|
|
Life-time assessment of bridge based on nonlinear analysis and degradation modelling
Kucek, Martin ; Lehký, David (referee) ; Novák, Drahomír (advisor)
The aim of this work is to calculate the lifetime period of the bridge construction based on the nonlinear analysis and the degradation modelling. As a solution was the probabilistic nonlinear finite element analysis. The nonlinear numerical analysis is provided by the programme ATENA, developed by the Červenka Consulting. We have modeled one prefabricated bridge beam KA-73, which was overloaded by power effects until the structure was damaged. Observed limit states, limit state of the decompression, crack formation and limit state of the bearing were compared with characteristic material. It is possible to determine the maximum weighted capacity for the given construction based on discovered values.
|
|
|
Design of the road bridge
Prombergerová, Tereza ; Svoboda, Adam (referee) ; Klusáček, Ladislav (advisor)
This work deals with the design and assessment of a parapet bridge in the village of Hladké Životice. The purpose was to design the maximum free height and try to reduce the construction height of the bridge to a minimum. The height of the main prestressed beams was optimized depending on the concrete grade and the applied load. The effects were calculated manually, with control in Scia Engineer. The assessment is according to European standards.
|
|
|
Load-bearing structure of mountain hotel
Kudličková, Jitka ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
Master’s thesis is based on analysis and design of a load bearing structure of an mountains hotel. Mountain hotel schould be realized in the village Vernirovice in Šumperk district. The proposed structure is formed 4th floors. In 1.NP is a restaurant, a sports and wellness center. In 2.NP in the right side is situated the swimming pool. In 2 to 4 floor are located rooms. This structure is supported with a strip footing made of reinforced concrete. The main load-bearing elements in the vertical direction are in 1.NP reinforced concrete walls and columns, the upper floors bearing masonry walls of ceramic blocks THERM. The inner support walls are 300 mm thick, outside support walls are 400 mm thick. Floors are constructed of carrying plates with girders above the larger openings. These plates and girders are made of reinforced concrete. In the 2 floor are beams with the span of 8,8 m. These girders are designed of prestressed concrete cause the large loads. Individual levels are connected with monolithic concrete staircases. Around the middle of the building is a monolithic reinforced concrete elevator shaft. The highest elevation above grade level is 16 m. The thesis also deals with relevant drawing documentations for chosen parts of construction.The building is located in the ski area VI and IV wind areas.
|
|
|
Load - bearing structure of apartment block
Nečas, Daniel ; Juchelková, Pavlína (referee) ; Strnad, Jiří (advisor)
Master’s thesis is based on analysis and design of a load bearing structure of an apartment block. This structure is supported with a strip footing made of reinforced concrete. The above-ground part of designed structure consists of brick masonry. Floors are constructed of carrying plates. These plates are made of reinforced concrete and precast boards (prestressed concrete). Individual levels are connected with monolithic concrete staircases. The thesis also deals with relevant drawing documentations for chosen parts of construction.
|
|
|
Railway arch concrete bridge
Škrabal, Jan ; Zlatuška, Karel (referee) ; Koláček, Jan (advisor)
The subject of this diploma thesis is the structural design of a railway bridge over river Dyje based on materials given by my supervisor. The tied arch bridge with prestressed concrete girder is chosen for the structural check. The structural assesment is focused on prestressed concrete girder and basic calculations are made to check steel arch and hangers as well. Eigenvalue analysis provides dynamic properties of this structure. Appendices contain Structural design report, drawings including Construction stages scheme and visualization. For structural analysis Midas Civil software was used. Other used softwares for visualization, and outputs etc are: Lumion12, IdeaStatica, Microsoft excel and Autocad
|
|
|
Design of the road bridge
Prombergerová, Tereza ; Svoboda, Adam (referee) ; Klusáček, Ladislav (advisor)
This work deals with the design and assessment of a parapet bridge in the village of Hladké Životice. The purpose was to design the maximum free height and try to reduce the construction height of the bridge to a minimum. The height of the main prestressed beams was optimized depending on the concrete grade and the applied load. The effects were calculated manually, with control in Scia Engineer. The assessment is according to European standards.
|
|
|
Railway arch concrete bridge
Škrabal, Jan ; Zlatuška, Karel (referee) ; Koláček, Jan (advisor)
The subject of this diploma thesis is the structural design of a railway bridge over river Dyje based on materials given by my supervisor. The tied arch bridge with prestressed concrete girder is chosen for the structural check. The structural assesment is focused on prestressed concrete girder and basic calculations are made to check steel arch and hangers as well. Eigenvalue analysis provides dynamic properties of this structure. Appendices contain Structural design report, drawings including Construction stages scheme and visualization. For structural analysis Midas Civil software was used. Other used softwares for visualization, and outputs etc are: Lumion12, IdeaStatica, Microsoft excel and Autocad
|
|
|
Load-bearing structure of mountain hotel
Kudličková, Jitka ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
Master’s thesis is based on analysis and design of a load bearing structure of an mountains hotel. Mountain hotel schould be realized in the village Vernirovice in Šumperk district. The proposed structure is formed 4th floors. In 1.NP is a restaurant, a sports and wellness center. In 2.NP in the right side is situated the swimming pool. In 2 to 4 floor are located rooms. This structure is supported with a strip footing made of reinforced concrete. The main load-bearing elements in the vertical direction are in 1.NP reinforced concrete walls and columns, the upper floors bearing masonry walls of ceramic blocks THERM. The inner support walls are 300 mm thick, outside support walls are 400 mm thick. Floors are constructed of carrying plates with girders above the larger openings. These plates and girders are made of reinforced concrete. In the 2 floor are beams with the span of 8,8 m. These girders are designed of prestressed concrete cause the large loads. Individual levels are connected with monolithic concrete staircases. Around the middle of the building is a monolithic reinforced concrete elevator shaft. The highest elevation above grade level is 16 m. The thesis also deals with relevant drawing documentations for chosen parts of construction.The building is located in the ski area VI and IV wind areas.
|
|
|
Strengthening of roof girders in production hall
Wawreczka, Karel ; Strnad, Jiří (referee) ; Klusáček, Ladislav (advisor)
The aim of my bachelor’s thesis is strengthening of girder roof construction in a production hall. The roof girders were designed 18 years ago in accordance with the Czech standards valid at that time. All the girders are now recalculated according to valid European norms. It is suggested to use prestressed cables guided along the girder construction. Because of the lack of space around the front of girders, it is designed to use prestressing from in the middle. In order to design the cable geometry and the biasing force, it was crucial to take into account shear resistance as well as constraining compressive stress in the concrete. Calculation of the effects of load is carried out by Scia Engineer 2015 computer software whereas Excel has been used for all the other calculations.
|
guest ::
