|
|
The influence of decreasing of impeller diameter, change Q - Y characteristic
Hyriak, Maroš ; Habán, Vladimír (referee) ; Haluza, Miloslav (advisor)
The purpose of the thesis is to familiarize with the fundamental characteristics of ta centrifugal pump while changing geometry of the output section of its impeller trimming. Characteristics of a pump is calculated whilst diameter of the impeller is changed. More specifically, changes in the flow and energy are observed while diameter of the impeller is decreasing. Two possible solutions, approximate and accurate, are offered for both parameters. The thesis suggests that an application of the approximate solution is satisfactory for the flow calculation of the impeller. In contrast, for the energy calculation is the approximate solution sufficient only in case of the slight trimming. Increase in the trimming results in the drop of the hydraulic efficiency and decrease in the accuracy of the results. Consequently, the accurate solution is recommended for the energy calculations. Limitations of the paper may be represented by two facts. First, in comparison with the calculations, results are in reality affected my numerous variables that have not been included in the calculations due to their unpredictability. Second, calculations were based on the several assumptions that are rarely met in the reality. The results of the thesis are applicable in the every-day life when adapting the pump to the customer needs.
|
|
|
Single stage steam turbine
Girman, Peter ; Novotný, Zdeněk (referee) ; Fiedler, Jan (advisor)
The thesis deals with design of single stage steam turbine. Applicable alternatives with appraisal and variant solving were developed on the basis of overheated steam parameters. Main thesis output is design of the most appropriate variant with real turbine’s dimension and the most fitted applicability and the best effectiveness.
|
|
|
The influence of decreasing of impeller diameter, change Q - Y characteristic
Hyriak, Maroš ; Habán, Vladimír (referee) ; Haluza, Miloslav (advisor)
The purpose of the thesis is to familiarize with the fundamental characteristics of ta centrifugal pump while changing geometry of the output section of its impeller trimming. Characteristics of a pump is calculated whilst diameter of the impeller is changed. More specifically, changes in the flow and energy are observed while diameter of the impeller is decreasing. Two possible solutions, approximate and accurate, are offered for both parameters. The thesis suggests that an application of the approximate solution is satisfactory for the flow calculation of the impeller. In contrast, for the energy calculation is the approximate solution sufficient only in case of the slight trimming. Increase in the trimming results in the drop of the hydraulic efficiency and decrease in the accuracy of the results. Consequently, the accurate solution is recommended for the energy calculations. Limitations of the paper may be represented by two facts. First, in comparison with the calculations, results are in reality affected my numerous variables that have not been included in the calculations due to their unpredictability. Second, calculations were based on the several assumptions that are rarely met in the reality. The results of the thesis are applicable in the every-day life when adapting the pump to the customer needs.
|
|
|
Single stage steam turbine
Girman, Peter ; Novotný, Zdeněk (referee) ; Fiedler, Jan (advisor)
The thesis deals with design of single stage steam turbine. Applicable alternatives with appraisal and variant solving were developed on the basis of overheated steam parameters. Main thesis output is design of the most appropriate variant with real turbine’s dimension and the most fitted applicability and the best effectiveness.
|
guest ::
