|
Production concept of catch basin
Kubátová, Denisa ; Řiháček, Jan (referee) ; Císařová, Michaela (advisor)
The project is focused on the production of catch basin, used for bottling, and pouring aggressive substances. The basin will be made of corrosion-resistant austenitic chrome-nickel-molybdenum steel 17 346 in a production series of 15,000 pieces per year. The literary research is carried out on the technology of surface forming, specifically drawing. The practical part is devoted to the design of the technology for the production of the part and technological calculations that show that the part will be pulled out in one pulling operation using a holder. Based on the calculations, a pulling tool was designed, and finally, according to the calculated necessary pulling force for the production of the part, a PO 630 press with a nominal force of 6,300 kN was chosen.
|
|
Production of uncapping tray
Čudová, Monika ; Dvořák, Milan (referee) ; Císařová, Michaela (advisor)
The project elaborated design of technology production of the extract - tray made of stainless steel 17 240. Based on literary study of deep drawing together with calculations, was designed drawing in instrument with holder. The drawing instrument make use of standardised components and it is solving forms to make up stand fitting to hydraulic press CYS 320, with nominal tensile force 3200 kN. Drawing punch and drawing die are produced from high alloyed steel 19 573 heat-worked according to drawing documentation.
|
|
Manufacturing of the Ignition Case
Jelínek, Dan ; Císařová, Michaela (referee) ; Řiháček, Jan (advisor)
The thesis deals with the design of the production of Ignition case. Component is a hollow cover of one channel ignition device, produced by the PBS Velká Bíteš company. It has a constant wall thickness of 0,5 mm and production rate is 15 000 pieces per year. Technology of deep drawing with solid forming tool was picked out of several considered production variants. DC05 deep drawing steel is the material of choice. Based on technological calculations, number of drawing operations needed and forming force was established. Based on those parameters, hydraulic press ZH 10 produced by the Presshydraulika s.r.o. company was chosen for the task.
|
|
The Production Technology of unrotary part with flange
Přikryl, Zdeněk ; Hušek, Martin (referee) ; Císařová, Michaela (advisor)
Study describes application of forming technology for the production of unrotary parts with flange. The Study considers preliminary technology of forming processes in general. Further includes problems about drawing of unrotary parts with flange from singular to complex shaped. The next part of study includes evaluation of methods of the production belt gear shelter considering product criterias for series production and final accuracy and quality. Following part includes suggestion of the production technology of belt gear shelter using sheet metal forming. In the next parts of the study attends to accurate technological process elaboration of the components, to technological calculations and to project tool configuration. In conclusion the study includes technoeconomic evaluation of propřed technology production.
|
|
Manufacturing of the Ignition Case
Jelínek, Dan ; Císařová, Michaela (referee) ; Řiháček, Jan (advisor)
The thesis deals with the design of the production of Ignition case. Component is a hollow cover of one channel ignition device, produced by the PBS Velká Bíteš company. It has a constant wall thickness of 0,5 mm and production rate is 15 000 pieces per year. Technology of deep drawing with solid forming tool was picked out of several considered production variants. DC05 deep drawing steel is the material of choice. Based on technological calculations, number of drawing operations needed and forming force was established. Based on those parameters, hydraulic press ZH 10 produced by the Presshydraulika s.r.o. company was chosen for the task.
|
|
Production of uncapping tray
Čudová, Monika ; Dvořák, Milan (referee) ; Císařová, Michaela (advisor)
The project elaborated design of technology production of the extract - tray made of stainless steel 17 240. Based on literary study of deep drawing together with calculations, was designed drawing in instrument with holder. The drawing instrument make use of standardised components and it is solving forms to make up stand fitting to hydraulic press CYS 320, with nominal tensile force 3200 kN. Drawing punch and drawing die are produced from high alloyed steel 19 573 heat-worked according to drawing documentation.
|
|
The Production Technology of unrotary part with flange
Přikryl, Zdeněk ; Hušek, Martin (referee) ; Císařová, Michaela (advisor)
Study describes application of forming technology for the production of unrotary parts with flange. The Study considers preliminary technology of forming processes in general. Further includes problems about drawing of unrotary parts with flange from singular to complex shaped. The next part of study includes evaluation of methods of the production belt gear shelter considering product criterias for series production and final accuracy and quality. Following part includes suggestion of the production technology of belt gear shelter using sheet metal forming. In the next parts of the study attends to accurate technological process elaboration of the components, to technological calculations and to project tool configuration. In conclusion the study includes technoeconomic evaluation of propřed technology production.
|