|
|
Static solution of prefabricated hall
Koníček, Jakub ; Koláček, Jan (referee) ; Zich, Miloš (advisor)
The presented thesis deals with design and optimization of selected structural elements of high-load storage hall skeleton. As a basis for the solution is taken the structure of a real storage hall designed in the years 2017-2018. The structure is designed for minimum weight. For this reason, so-called D-regions are formed on the structure. For the solution of D-areas, general methods of solution, such as STM or nonlinear FEM analyses, are used in the thesis. In the final designed structural elements are compared to the original design of the hall. Thesis include static calculation of 24 m long roof beam V1, static calculation of 24 m long ceiling beam ST1, drawing documentation and technical report. Programs were used for the calculation: SCIA Engeneer 18.1, Idea StatiCa Beam10.1, Idea StatiCa Detail 10.1, RIB Fermo, PTC MathCad and MS Excel.
|
|
|
Design of concrete structure of the Letná hotel in Prague
Koníček, Jakub ; Nováček, Jan (referee) ; Zich, Miloš (advisor)
The presented master thesis contains the design of selected elements of the supporting structure of the Letná congress hotel. The thesis deals with the design of a six-storey hotel cantilever over 20 m long, which rises over the entrance portals of the Blanka tunnel complex. Moreover, the specificity of the whole project is the necessity to carry out the entire construction of the mentioned part without touching the ground. The described problem was solved primarily using two double to 3 m high prestressed concrete beams. One pair of beams is designed above the roof plane and the other below the plane of the first floor in the cantilever. The tensile forces induced in the vertical supports are transferred by the prestressed columns and with the help of the walls. Construction without ground contact is carried out using suspension on temporary hangers. In the present thesis work, the main beam of the cantilever H1, D1, reinforced concrete slabs of given levels forming the T-section flange of the main beams, the spread walls, the transverse walls under the transversal frames with the main beams and the respective columns have been designed. SCIA Engeneer 22.0, Idea StatiCa Beam 22.0, Idea StatiCa Detail 22.0, PTC MathCad Prime 8, and MS Office 360 Excel 2022 were used to solve this complex construction stage-dependent problem.
|
|
|
Static solution of prefabricated hall
Koníček, Jakub ; Koláček, Jan (referee) ; Zich, Miloš (advisor)
The presented thesis deals with design and optimization of selected structural elements of high-load storage hall skeleton. As a basis for the solution is taken the structure of a real storage hall designed in the years 2017-2018. The structure is designed for minimum weight. For this reason, so-called D-regions are formed on the structure. For the solution of D-areas, general methods of solution, such as STM or nonlinear FEM analyses, are used in the thesis. In the final designed structural elements are compared to the original design of the hall. Thesis include static calculation of 24 m long roof beam V1, static calculation of 24 m long ceiling beam ST1, drawing documentation and technical report. Programs were used for the calculation: SCIA Engeneer 18.1, Idea StatiCa Beam10.1, Idea StatiCa Detail 10.1, RIB Fermo, PTC MathCad and MS Excel.
|
guest ::
